Planet WGSD-1022 Manuel utilisateur

8-Port 10/100Mbps

+2-Port/Gigabit

Managed Ethernet Switch

WGSD-1022

Quick Installation Guide

Table of Contents

1. Package Content......................................................................... 3

2. Requirements ............................................................................. 4

3. Terminal Setup ........................................................................... 5

4. Logon to the Console .................................................................. 6

5. Congure IP address................................................................... 7

6. Start Web Management............................................................... 9

Customer Support ........................................................................11

1. Package Content

Open the box of the WGSD-1022 and carefully unpack it. The box

should contain the following items:

● WGSD-1022 x 1

● User’s manual CD x 1

● Quick installation guide x 1

● AC Power adapter x 1

● RS232 cable x 1

● Rubber feet x 4

● Two rack-mounting brackets with attachment screws x 1

If any item is found missing or damaged, please contact your local

reseller for replacement.

2. Requirements

● Workstations of subscribers running Windows 95/98/ME, NT4.0,

2000/XP, MAC OS9 or later, Linux, UNIX or other platform compatible

with TCP/IP protocols.

● Workstation installed with Ethernet NIC (Network Card)

● Serial Port connect (Terminal)

● Above PC with COM Port (DB-9)

● Ethernet Port connect

● Network cables - Use standard network (UTP) cables with RJ45

connectors.

● Above PC installed with WEB Browser and JAVA runtime environment

Plug-in

Note

It is recommended to use Internet Explorer 6.0 or above

to access WGSD-1022.

3. Terminal Setup

To congure the system, connect a serial cable to a COM port on a PC

or notebook computer and to serial (console) port of the WGSD-1022.

The console port of the WGSD-1022 is DCE already, so that you can

connect the console port directly through PC without the need of Null

Modem.

A terminal program is required to make the software connection to the

WGSD-1022. Windows’ Hyper Terminal program may be a good choice.

It can be accessed from the Start menu. Click START, then Programs,

Accessories and then Hyper Terminal.

MS-DOS based terminal program such as PC-PLUS, PROCOMM, can also

make the connection with the WGSD-1022 built-in software. The COM

port should be congured as:

● Baud: 38400

● Parity: None

● Data bits: 8

● Stop bits: 1

● Flow Control: None

4. Logon to the Console

Once the terminal has connected to the device, power on the WGSD-

1022, the terminal will display that it is running testing procedures.

Then, the following message asks the login user name and password.

The factory default user name and password is “admin”. The screen in

gure 4-1 appears.

Figure 4-1 WGSD-1022 Console Login screen

Note

1. For security reason, please change and memorize the

new password after this first setup.

2. Only accept command in lowercase letter under

console interface.

5. Congure IP address

The WGSD-1022 is shipped with Fixed IP address 192.168.1.254 by

default. To check the current IP address or modify a new IP address for

the Switch, please use the procedures as follow:

Show the current IP address

1. On “Console#” prompt, enter “show ip interface”.

2. The screen displays the current IP address, netmask and gateway. As

show in Figure 5-1.

Figure 5-1 Show IP information screen

Congure IP address

3. On ”Console#” prompt, type “congure” to enter the conguration

mode.

4. On “Console(cong)#” prompt, enter the following command and

press <Enter>. As show in Figure 5-2.

console (cong)# interface vlan 1

console (cong-if)# ip address 192.168.1.100 255.255.255.0

The previous command would apply the follow settings for the Switch.

IP: 192.168.1.100

Netmask: 255.255.255.0

Figure 5-2 Set IP address screen

5. Repeat Step 1 to check if the IP address is changed.

If the IP is successfully congured, the Switch will apply the new

IP address setting immediately. You can access the web interface of

WGSD-1022 through the new IP address.

Note

If you do not familiar with console command or the

related parameter, enter “help” anytime in console to get

the help description.

6. Start Web Management

You can either use console port to continue the WGSD-1022’s setup or

using your Internet browser for further conguration.

The following shows how to startup the Web Management of the

WGSD-1022, please note the WGSD-1022 is congured through an

Ethernet connection, make sure the manager PC must be set on the

same IP subnet address.

For example, the default IP address of the WGSD-1022 is

192.168.1.254, then the manager PC should be set at 192.168.1.x

(where x is a number between 1 and 253), and the default subnet

mask is 255.255.255.0.

1. Use Internet Explorer 5.0 or above Web browser, enter IP address

http://192.168.1.254 (the factory-default IP address or that you have

just changed in console) to access the Web interface.

2. When the Login page is shown, the system will ask you to enter the

username and password.

Default User name: admin

Default Password: admin

The screen appears as Figure 6-1.

Figure 6-1 WEB Login Page screen

3. After entering the username and password, the main screen appears

as Figure 6-2.

Figure 6-2 Web Main Screen of WGSD-1022

Now, you can use the Web management interface to continue the

switch management or manage the Switch by console interface.

Please refer to the user manual for more.

Autres manuels pour WGSD-1022

Table des matières

Autres manuels Planet Changer

Planet

Planet Palm-Top EH-501 Manuel utilisateur

Planet

Planet IGS-5225 Series Manuel utilisateur

Planet

Planet WGS-4215-T Manuel utilisateur

Planet

Planet GS-4210-8UP2S Manuel utilisateur

Planet

Planet NOVA100 Series Manuel utilisateur

Planet

Planet FSD-805 Manuel utilisateur

Planet

Planet XGS-6320-8X8TR Manuel utilisateur

Planet

Planet FGSD-910P Manuel utilisateur

Planet

Planet FNSW-2402S Manuel utilisateur

Planet

Planet GS-4210 SERIES Manuel utilisateur

Planet

Planet HPOE-1200G Manuel utilisateur

Planet

Planet IGS-1000 Series Manuel utilisateur

Planet

Planet IGS-6325 Series Manuel utilisateur

Planet

Planet KVM-1600 Manuel utilisateur

Planet

Planet WGS-4215-8P2S Manuel utilisateur

Planet

Planet GSD-800 Manuel utilisateur

Planet

Planet MGSW-004 Manuel utilisateur

Planet

Planet FSD-805S15 Manuel utilisateur

Planet

Planet POE-400 Manuel utilisateur

Planet

Planet MGSW SERIES Manuel utilisateur

Planet

Planet WGSD-1022 Manuel utilisateur

Planet

Planet IKVM-8020 Manuel utilisateur

Planet

Planet IKVM-8020 Manuel utilisateur

Planet

Planet GS-6320-46S2C4XR Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur