Pitney Bowes AddressRight DA50S Manuel utilisateur

Service Manual

DA50S/DA55S and DA70S/DA75S

AddressRight™ Shuttlehead Printers

DA50S (WS51) - Black

DA55S (WS56) - Black & Color

DA70S (WS71) - Black

DA75S (WS76) - Black & Color

FCC Compliance

This equipment had been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance

with the users manuals, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Shielded cables must be used with this unit to insure compliance with Class A limits.

Canadian DOC Compliance

This digital apparatus does not exceed in the Class A limits for radio noise emissions from digital ap-

paratus set out in the Interference-causing Equipment Regulations (Standard ICES-003) of the Ca-

nadian Department of Communications.

Le present appareil numerique n’emet pas de bruits radioelectriques depassant les limites appli-

cables aux appareils numeriques de la class A prescrites dans le Reglement sur le brouillage radio-

electrique edicte par le ministere des Communications du Canada.

NOTE: This equipment has been tested and found to comply with the U.S. Standard for Safety

UL1950, Third Edition, Safety of Information Technology Equipment including Electrical Business

Equipment and Canadian Standards C22.2 No 950-95, Third Edition, Safety of Information Technol-

ogy Equipment including Electrical Business Equipment

First Edition, March 2007

SV61831 Rev. A

retrieval system of any type or transmitted by any means, electronically or mechanically, without the

express written permission of Pitney Bowes Inc.

We have made every reasonable effort to assure the accuracy and usefulness of this manual, how-

ever, we cannot assume responsibility for errors or omissions or liability for the misuse or misappli-

cation of our products.

Table of Contents

DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual iii

Chapter 1 – Introduction

1.1 Purpose of this Manual.............................................................. 1-1

1.2 Related Publications.................................................................. 1-1

1.3 Book Organization..................................................................... 1-2

1.4 Safety ........................................................................................ 1-2

Chapter 2 – Speciﬁcations

2.1 Product Description ................................................................... 2-1

2.2 System Requirements ............................................................... 2-1

2.3 Physical Equipment Specifications............................................ 2-2

2.4 Print Specifications.................................................................... 2-3

2.5 Material Specifications............................................................... 2-7

Chapter 3 - Theory

3.1 Changes From Earlier Models .................................................. 3-1

3.2 Printer Architecture.................................................................... 3-2

3.3 Operating Sequence.................................................................. 3-5

Chapter 4 - Troubleshooting/Diagnostics

4.1 Block Diagrams ......................................................................... 4-1

4.2 Main Controller Board Diagnostics............................................ 4-3

4.3 Troubleshooting Tables.............................................................. 4-7

4.4 Printer Error Codes.................................................................. 4-14

4.5 Print Samples for Troubleshooting .......................................... 4-15

Chapter 5 - Removal & Replacement

5.1 List of Procedures...................................................................... 5-1

DA50S/DA55S (WS51/WS56) Parts Removal

5.2 Covers ...................................................................................... 5-2

5.3 Display/Keyboard ..................................................................... 5-3

5.4 Main Processor Board/Grounding Sheet Assembly ................. 5-3

5.5 USB/Ethernet Input Board ........................................................ 5-4

5.6 Power Supply ........................................................................... 5-5

5.7 Paper Transport Motor/Belt ...................................................... 5-7

5.8 Sensor ...................................................................................... 5-9

5.9 Feed Roller Assembly ..............................................................5-11

5.10 Encoder and Operator Side Drive Belt ................................. 5-13

Table of Contents

iv SV61831 Rev. A DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual

Chapter 5 - Removal & Replacement (continued)

DA70S/DA75S (WS71/WS76) Parts Removal

5.11 Covers .................................................................................. 5-15

5.12 Display/Keyboard ................................................................. 5-17

5.13 Main Processor Board/Grounding Sheet Assem. ................. 5-17

5.14 USB/Ethernet Input Board .................................................... 5-18

5.15 Power Supply ....................................................................... 5-18

5.16 Feed Roller Assembly............................................................ 5-19

5.17 Motor Drive Belts and Main Motor ........................................ 5-21

5.18 Exit Roller ............................................................................. 5-23

5.19 Sensor .................................................................................. 5-23

5.20 Shuttle Head Motor, Print Head, Shuttle Drive ..................... 5-24

5.21 H-Block Tip ........................................................................... 5-25

Chapter 6 - Adjustments

6.1 List of Adjustments .................................................................... 6-1

Adjustments for All Models

6.2 LCD Display .............................................................................. 6-2

6.3 Paper Sensor Test and Calibration ........................................... 6-2

DA50S/DA55S (WS51/WS56) Adjustments

6.4 Main Brake ............................................................................... 6-3

6.5 Printhead Clearance.................................................................. 6-5

6.6 Adjusting Exit Roller Idler Assembly .......................................... 6-6

6.7 Printhead Drive Belt .................................................................. 6-7

6.8 Main Drive Belt .......................................................................... 6-8

6.9 Adjusting Service Station Assembly .......................................... 6-9

DA70S/DA75S (WS71/WS76) Adjustments

6.10 Main Brake ............................................................................ 6-10

6.11 Print Head Drive Belt ............................................................. 6-10

6.12 Timing Belt .............................................................................6-11

6.13 Main Drive Belt .......................................................................6-11

6.14 Print Head Home Position ..................................................... 6-12

Table of Contents

DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual v

Chapter 7 - Maintenance Procedures

7.1 General...................................................................................... 7-1

7.2 Specific Maintenance ................................................................ 7-2

Appendix A – Printer Control Panel Menus and Utilities

A.1 Control Panel Menus for the Printer..........................................A-1

A.2 LCD Control Panel Menu .........................................................A-3

A.2 LCD Main Menu .......................................................................A-4

A.3 LCD Setup Menu.......................................................................A-9

A.4 LCD Service Menu..................................................................A-19

A.5 Setting Factory Defaults (from LCD Menu).............................A-24

A.6 Updating Firmware..................................................................A-26

Appendix B – Printer Communications

B.1 Communication Scenarios ........................................................B-1

B.2 Troubleshooting Tables .............................................................B-4

B.3 Testing Printer Communications Within a Network ...................B-7

Appendix C – Schematics

Main Processor Board Schematic ....................................................C-2

LCD/Keypad .....................................................................................C-3

USB/Ethernet LAN Function.............................................................C-4

Black & White Printer Head..............................................................C-5

Color Print Head...............................................................................C-6

Index (not ready at time of publishing)........................ I-1

Table of Contents

vi SV61831 Rev. A DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual

1 • Introduction

DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual 1-1

This book contains instructions for troubleshooting and site repair of DA50S/

DA55S and DA70S/DA75S AddressRight™ shuttlehead printers. It also includes

complete product specifications and a section on theory for training purposes.

For reference, the table below shows the predecessor shuttle head models.

1.1 Purpose of

this Manual

DA50S/DA55S Operator Guide SV61663

DA50S/DA55S Quick Setup Instructions (customer) SV61933

DA50S/DA55S Install SV61664

DA50S/DA55S Parts List SV61832

DA70S/DA75S Operator Guide SV61665

DA70S/DA75S Quick Setup Instructions (customer) SV61934

DA70S/DA75S Install SV61666

DA70S/DA75S Parts List SV61919

For other information on the printers, refer to these sources:

• Software Control Panel Application (on the host PC) - see the help sys-

tem on the software.

• FAQs document - see the Customer Service website under the product

page for AddressRight™ printers.

• Training - see Enhanced AddressRight™ Shuttle Head Printers Self-Direct-

ed Course (GMS-MC-03246) at My Portfolio on the Pitney Bowes intranet.

• Training Job Aids - print the job aids for the software control panel appli-

cation (GMS-MC-03246JA) at My Portfolio on the Pitney Bowes intranet.

1.2 Related

Publications/

Information

New

Marketing

Model

New

PCN Printing

Capability Speed Predecessor

Marketing

Model

Predecessor

PCN

DA50S WS51 Black Up to 10,000

#10 or DL

envelopes

per hour

DA500 W660

DA55S WS56 Black & Pro-

cess Color

(CYMK)

Up to 10,000

#10 or DL

envelopes

per hour

DA550 W680

DA70S WS71 Black Up to 14,000

#10 or DL

envelopes

per hour

DA700 W707

DA75S WS76 Black & Pro-

cess Color

(CYMK)

Up to 14,000

#10 or DL

envelopes

per hour

DA750 W790

1-2 SV61831 Rev. A DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual

1 • Introduction

Personal Safety

Follow these precautions for your own safety:

• Treat every circuit like a gun that may be loaded. It may not be “live,” but

be sure. Check with a neon tester or voltmeter, or simply unplug the ma-

chine.

• Know how to turn off the power in the work area and get help in an emer-

gency.

• Don’t work on equipment under power unless it’s absolutely necessary.

If you must, use extreme caution. Don’t grasp two sides of a live circuit

at the same time—use one hand when reaching into a circuit, touching

a grounded case or chassis with that wrist or elbow if possible. This pre-

vents current from passing through vital organs. Observe this rule when

connecting or disconnecting plugs or leads, or making any adjustments

on a live circuit.

Familiarize yourself with proper procedures and methods before you install,

operate or repair the equipment to avoid personal injury or damage to the

equipment. If you train service people or equipment operators, it is important to

explain safety precautions to your students and encourage safety awareness.

1.4 Safety Warning messages appear throughout this manual to alert you to potentially

hazardous conditions. Two designations indicate their relative seriousness:

WARNING! Calls attention to improper practices that

could result in a potentially serious, even lethal injury to

you or the customer.

CAUTION! Calls attention to practices that could

cause minor injury to you or a customer or that could

damage equipment or material.

Chapter 1: Introductory and safety information

Chapter 2: Product specifications

Chapter 3: Theory of operation

Chapter 4: Troubleshooting and Diagnostics

Chapter 5: Removal and replacement procedures

Chapter 5: Adjustment procedures

Chapter 7: Maintenance procedures

Appendix A: Printer Control Panel Menus

Appendix B: Printer Communications

Appendix C: Schematics/Diagrams

1.3 Book

Organization

DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual 1-3

Introduction • 1

Personal Safety (continued)

• Don’t underestimate the danger of shock: 1 mA (1/1000 amp) is uncom-

fortable; 5 mA is dangerous —you may jump back and be injured; 12 mA

causes hand muscles to contract, so you cannot free yourself; 24 mA has

proven fatal; and 100 mA (1/10 amp) is likely to be fatal.

• Use the right tools for the job. A tool which slips can cause a short—or a

shock. Don’t reach into a circuit with metal tools, or while wearing rings or

a watch. Even in low voltage circuits, a metal object can short circuit two

terminals. When working on live circuits, use tools with insulated handles

and try to keep your tool hand grounded.

• Don’t bypass safety devices, particularly fuses. Three-wire outlets (120

Vac) are designed to ground equipment to make it safe. If a hot wire

shorts to a grounded frame, the only result is an open fuse. If a hot wire

shorts to an ungrounded frame, the frame itself becomes hot and poten-

tially dangerous. A fuse is a weak link in a circuit, designed to break down

before anything else does. The maximum safe current in a circuit is de-

termined by the designers. Too large a fuse can pass excessive current,

damaging expensive equipment.

• For electrical fires, use Type C, BC or ABC extinguishers only. Don’t use

soda acid or other liquid stream extinguishers. They will damage elec-

trical equipment and present a shock hazard to the user.

• Digital equipment can be easily damaged or destroyed by static charges.

Microprocessors and other integrated circuits contain tiny transistors not

much more than a millionth of an inch across, which operate at 5 to 12

volts.

• Be extremely careful when lifting heavy equipment. Follow the guidelines

below:

a. Squat to lift and lower. DO NOT bend at the waist.

b. Keep your low back bowed in while bending over.

c. Keep the weight as close to you as possible.

d. Bow your back in and raise up with your head first.

e. If you must turn, turn with your feet, not your body.

f. Never jerk or twist!

g. Put the weight down by keeping your low back bowed in.

h. Keep your feet apart, staggered if possible.

i. Wear shoes with non-slip soles.

j. Get help if you need it.

1.4 Safety

1-4 SV61831 Rev. A DA50S/DA55S/DA70S/DA75S AddressRight™ Printers Service Manual

1 • Introduction

Electrostatic Discharge (ESD) Procedures

Follow these guidelines to protect sensitive equipment from static damage:

• Always use a wrist grounding strap and anti-static mat when working on

equipment sensitive to electrostatic discharge. These items are furnished

in the ESD Field Service Kit, L-8351.

• Ground yourself before reaching into the equipment, or touching any

circuit board or other electrical component. Just touching a doorknob or

metal workbench may be enough, but the best guarantee is to turn the

machine off but leave it plugged in, and ground yourself on the chassis,

which is grounded through the three-wire power cord.

• Be careful of rugs—even a few steps can recharge you. Re-ground your-

self whenever you’ve walked away and returned to the machine. Rugs

are a major source of static buildup in the body.

• Take greater precautions as the objects you handle get smaller. A board

in the machine is better protected than one that is not plugged in; a chip

on a board is better protected than one in your hand.

• Stay away from metal conductors. The plastic and resin that chips and

boards are made of are much better insulators than metal. It’s most im-

portant to keep your hands away from any metal which contacts the data.

In particular, this means the long connector along the bottom of each

board, and the pins coming out of the chips. These signal and data lines

are directly connected to the fragile inner circuits of the chips. When han-

dling a board, try not to touch the connector; when handling a chip, try

not to touch the pins.

1.4 Safety

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Pitney Bowes Imprimante

Pitney Bowes

Pitney Bowes DP50S Manuel utilisateur

Pitney Bowes

Pitney Bowes ADDRESSRIGHTTM DA900 Manuel utilisateur

Pitney Bowes

Pitney Bowes Datamax w1110 Manuel utilisateur

Pitney Bowes

Pitney Bowes DP50S Instructions d'installation

Pitney Bowes

Pitney Bowes AddressRight DA300 Manuel

Pitney Bowes

Pitney Bowes AddressRight DA300 Manuel utilisateur

Pitney Bowes

Pitney Bowes da95f Manuel

Pitney Bowes

Pitney Bowes AddressRight DA300 Manuel

Pitney Bowes

Pitney Bowes SendPro P Series Manuel utilisateur

Pitney Bowes

Pitney Bowes Datamax w1110 Manuel utilisateur

Pitney Bowes

Pitney Bowes AddressRight DA Series Manuel

Pitney Bowes

Pitney Bowes SendKit PB-SP100 Manuel utilisateur

Pitney Bowes

Pitney Bowes ADDRESSRIGHT DA500 Manuel

Pitney Bowes

Pitney Bowes SendPro C Lite Manuel utilisateur

Pitney Bowes

Pitney Bowes AddressRight 200 Manuel utilisateur

Pitney Bowes

Pitney Bowes DocuMatch Integrated Mail System Supplément

Pitney Bowes

Pitney Bowes QL-1100 Manuel utilisateur

Pitney Bowes

Pitney Bowes Datamax w1110 Manuel utilisateur

Pitney Bowes

Pitney Bowes DP50S Manuel utilisateur

Pitney Bowes

Pitney Bowes 1100 Manuel utilisateur

Pitney Bowes

Pitney Bowes E725 Manuel utilisateur

Pitney Bowes

Pitney Bowes ADDRESSRIGHT DA950 Manuel

Pitney Bowes

Pitney Bowes AddressRight DA70S Manuel

Pitney Bowes

Pitney Bowes ADDRESSRIGHT DA750 Manuel

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur