Phytec PhyCORE-DS80C390 Manuel de programmation

A product of a PHYTEC Technology Holding company

phyCORE-DS80C390

QuickStart Instructions

Using PHYTEC FlashTools 3 and the Keil µVision2 Software

Evaluation Development Tool Chain

Note: The PHYTEC Spectrum CD includes the electronic version of

the English phyCORE-DS80C390 Hardware Manual

Hinweis: Die PHYTEC Spektrum CD beinhaltet die elektronische

Version des deutschen phyCORE-DS80C390 Hardware Manuals

Edition: May 2002

phyCORE-DS80C390 QuickStart Instructions

In this manual are descriptions for copyrighted products that are not explicitly

indicated as such. The absence of the trademark () and copyright () symbols

does not imply that a product is not protected. Additionally, registered patents and

trademarks are similarly not expressly indicated in this manual.

The information in this document has been carefully checked and is believed to be

entirely reliable. However, PHYTEC Meßtechnik GmbH assumes no

responsibility for any inaccuracies. PHYTEC Meßtechnik GmbH neither gives any

guarantee nor accepts any liability whatsoever for consequential damages resulting

from the use of this manual or its associated product. PHYTEC Meßtechnik

GmbH reserves the right to alter the information contained herein without prior

notification and accepts no responsibility for any damages which might result.

Additionally, PHYTEC Meßtechnik GmbH offers no guarantee nor accepts any

liability for damages arising from the improper usage or improper installation of

the hardware or software. PHYTEC Meßtechnik GmbH further reserves the right

to alter the layout and/or design of the hardware without prior notification and

accepts no liability for doing so.

Rights - including those of translation, reprint, broadcast, photomechanical or

similar reproduction and storage or processing in computer systems, in whole or in

part - are reserved. No reproduction may occur without the express written

consent from PHYTEC Meßtechnik GmbH.

EUROPE NORTH AMERICA

Address: PHYTEC Technologie Holding AG

Robert-Koch-Str. 39

D-55129 Mainz

GERMANY

PHYTEC America LLC

203 Parfitt Way SW, Suite G100

Bainbridge Island, WA 98110

USA

Ordering

Information: +49 (800) 0749832

order@phytec.de 1 (800) 278-9913

info@phytec.com

Technical

Support: +49 (6131) 9221-31

[email protected] 1 (800) 278-9913

support@phytec.com

Fax: +49 (6131) 9221-33 1 (206) 780-9135

Web Site: http://www.phytec.de http://www.phytec.com

1st Edition: May 2002

Contents

PHYTEC Meßtechnik GmbH 2002 L-592e_1

1 Introduction to the Rapid Development Kit.....................................1

1.1 Rapid Development Kit Documentation ......................................1

1.2 Overview of this QuickStart Instruction.......................................2

1.3 System Requirements ...................................................................3

1.4 The PHYTEC phyCORE-DS80C390...........................................4

1.5 The Keil Software Evaluation Development Tool Chain.............7

2 Getting Started...................................................................................11

2.1 Installing Rapid Development Kit Software...............................11

2.2 Interfacing the phyCORE-DS80C390 to a Host-PC ..................18

2.3 Starting PHYTEC FlashTools ....................................................20

2.4 Downloading Example Code with FlashTools...........................21

2.4.1 "Blinky".........................................................................26

2.4.2 "Hello"...........................................................................28

3 Getting More Involved......................................................................33

3.1 Starting the Keil µVision2 Tool Chain.......................................33

3.2 Creating a New Project and Adding an Existing Source File.....34

3.3 Modifying the Source Code........................................................39

3.4 Saving the Modifications............................................................40

3.5 Setting Tool Chain Options ........................................................41

3.6 Building the Project....................................................................44

3.7 Downloading the Output File .....................................................45

3.8 “Hello2”......................................................................................46

3.8.1 Creating a New Project..................................................46

3.8.2 Modifying the Example Source.....................................47

3.8.3 Setting Tool Chain Options...........................................47

3.8.4 Building the New Project ..............................................47

3.8.5 Downloading the Output File........................................48

3.8.6 Starting the Terminal Emulation Program.....................49

phyCORE-DS80C390 QuickStart Instructions

4 Debugging ..........................................................................................51

4.1 Creating a Debug Project and Preparing the Simulator..............52

4.1.1 Creating a New Project .................................................52

4.1.2 Setting Options for Target.............................................53

4.2 Preparing the Simulator..............................................................55

4.3 Starting the Simulator.................................................................56

4.4 The Keil µVision2 Debug Features............................................59

4.5 Using the Keil µVision2 Debug Features...................................61

4.5.1 Breakpoints....................................................................61

4.5.2 Single Stepping and Watch Window.............................62

4.5.3 Running, Stopping and Resetting..................................64

4.6 Changing Target Settings for the "Final Version" .....................65

5 Advanced User Information.............................................................67

5.1 FlashTools ..................................................................................67

5.2 START390.A51 .........................................................................69

5.3 Linking and Locating .................................................................70

Index of Figures

Figure 1: Keil Tool Chain Overview ...........................................................8

Figure 2: Mounting the phyCORE-DS80C390 onto the

phyCORE Development Board LD 5V......................................18

Figure 3: Important Connectors, Buttons and Suitable Jumper Settings

on the phyCORE Development Board LD 5V...........................19

Figure 4: Power Connector........................................................................19

Introduction

1Introduction to the Rapid Development Kit

This QuickStart provides:

•general information on the PHYTEC phyCORE-DS80C390

Single Board Computer (SBC)

•an overview of Keil’s µVision2 software evaluation development

tool chain, and

•instructions on how to run example programs on the

phCORE-DS80C390, mounted on the PHYTEC

phyCORE Development Board LD 5V, in conjunction with

µVision2 IDE

Please refer to the phyCORE-DS80C390 Hardware Manual for

specific information on such board-level features as jumper

configuration, memory mapping and pin layout. Selecting the links on

the electronic version of this document links to the applicable section

of the phCORE-DS80C390 Hardware Manual.

1.1 Rapid Development Kit Documentation

This “Rapid Development Kit” (RDK) includes the following

electronic documentation on the enclosed “PHYTEC Spectrum

CD-ROM”:

•the PHYTEC phyCORE-DS80C390 Hardware Manual and

phyCORE Development Board LD 5V Hardware Manual

•controller User's Manuals and Data Sheets

•this QuickStart Instruction with general “Rapid Development Kit”

description, software installation hints and four example programs

enabling quick out-of-the box start-up of the

phyCORE-DS80C390 in conjunction with the Keil software

development tools

phyCORE-DS80C390 QuickStart Instructions

2© PHYTEC Meßtechnik GmbH 2002 L-592e_1

1.2 Overview of this QuickStart Instruction

This QuickStart Instruction gives a general “Rapid Development Kit”

description, as well as software installation hints and four example

programs enabling quick out-of-the box start-up of the

phyCORE-DS80C390 in conjunction with the Keil software

development tools. It is structured as follows:

1) The "Getting Started" section uses two example programs:

"Blinky" and "Hello" to demonstrate the download of user code

to the Flash device using PHYTEC FlashTools.

2) The "Getting More Involved" section provides step-by-step

instructions on how to modify both examples, create and build

new projects and generate and download output files to the

phyCORE-DS80C390 using the Keil tool chain and FlashTools.

3) The "Debugging”section provides a third example

program - “Debug” - to demonstrate the Keil simulator and

simple debug functions using the µVision2 debug environment.

In addition to dedicated data for this Rapid Development Kit, this

CD-ROM contains supplemental information on embedded

microcontroller design and development.

Introduction

1.3 System Requirements

Use of this “Rapid Development Kit” requires:

•the phyCORE-DS80C390 SBC module

•the phyCORE Development Board LD 5V with the included DB-9

serial cable and AC adapter supplying 5 VDC /min. 500 mA

•the PHYTEC Spectrum CD

•an IBM-compatible host-PC (486 or higher running at least

Windows95/98)

For more information and example updates, please refer to the

following sources:

http://www.phytec.com - or - http://www.phytec.de

support@phytec.com - or - [email protected]

http://www.keil.com

[email protected]

phyCORE-DS80C390 QuickStart Instructions

4© PHYTEC Meßtechnik GmbH 2002 L-592e_1

1.4 The PHYTEC phyCORE-DS80C390

The phyCORE-DS80C390 represents an affordable, yet highly

functional Single Board Computer (SBC) solution in subminiature

dimensions (47.5 x 55 mm). The standard board is populated with a

Dallas Semiconductor DS80C390 controller, featuring two on-chip

CAN controller.

All applicable data/address lines and applicable signals extend from

the underlying logic devices to standard-width (2.54 mm /0.10 in.) pin

headers lining the circuit board edges. This enables the

phyCORE-DS80C390 to be plugged like a “big chip” into target

hardware.

The standard memory configuration of the phyCORE-DS80C390

features 128 kByte external SRAM and 256 kByte external Flash for

code storage (64 kByte for FlashTools firmware and 192 kByte for

storage of user code). The Flash device allows direct on-board

programming. Three Chip Select signals are available for external

I/O connectivity.

The module communicates by means of an RS-232 transceiver and

operates within a standard industrial range of 0 to +70 degrees C. It

requires only a 200 mA power source.

PHYTEC FlashTools enables easy on-board download of user

programs.

Introduction

phyCORE-DS80C390 Technical Highlights

•SBC in subminiature dimensions (47.5 x 55 mm) achieved through

advanced SMD technology

•populated with an 64-pin packaged (QFP) Dallas Semiconductor

8051-compatible DS80C390 controller

•instruction cycle time of 100 ns at 40 MHz system clock speed

(frequency multiplier 4X)

•128 kByte (up to 1 MByte) external SRAM

•256 kByte (up to 2 MByte) external Flash supporting on-board

downloading of user code from a host-PC in conjunction with

PHYTEC FlashTools firmware

•RS-232 serial interface

•two 2.0B CAN bus interfaces supporting 11-bit and 29-bit

message identifiers

•on-chip 16-bit / 32-bit math coprocessor

•three Chip Select signals for connection to external peripherals

•requires only a +5 V/250 mA power source

•operates in a temperature range of 0... 70°C

(optional -40... 85°C temperature range available)

phyCORE-DS80C390 QuickStart Instructions

6© PHYTEC Meßtechnik GmbH 2002 L-592e_1

The phyCORE Development Board LD 5V, in EURO-card

dimensions (160 x 100 mm), is fully equipped with all mechanical

and electrical components necessary for the speedy and secure

insertion, and subsequent programming, of PHYTEC

phyCORE series Single Board Computers with standard width

(2.54 mm/ 0.10 in.) pin header connectors. Simple jumper

configuration readies the Development Board’s connection to any

phyCORE module (standard header pins), which plug pins-down into

the contact strips mounted on the phyCORE Development

Board LD 5V.

phyCORE Development Board LD 5V Technical Highlights

•Reset signal controlled by push button or RS-232 control line

CTS0

•Boot signal controlled by push button or RS-232 control line

DSR0

•low voltage socket for supply with regulated input voltage 5 VDC

•additional supply voltage 3.3 V

•two DB-9 sockets (P1A, P1B) configurable as RS-232 interfaces

•two additional DB-9 plugs (P2A, P2B) configurable as

CAN interfaces, connector P2B optionally configurable as RS-485

interface

•simple jumper configuration allowing use of the

phyCORE Development Board LD 5V with various PHYTEC

phyCORE SBC’s

•one control LED D3 for quick testing of user software

•2 x 160-pin Molex connector (X2) enabling easy connectivity to

expansion boards (e.g. PHYTEC GPIO Expansion Board)

Table des matières

Autres manuels Phytec Matériel informatique

Phytec

Phytec phyCORE-AM62Ax Manuel utilisateur

Phytec

Phytec PCAN-Dongle PK-001 Manuel de programmation

Phytec

Phytec phyGATE Tauri-L Manuel utilisateur

Phytec

Phytec phyCORE-AM335 Series Manuel utilisateur

Phytec

Phytec eGrabber-4plus Manuel utilisateur

Phytec

Phytec L-843e.A1 Manuel utilisateur

Phytec

Phytec phyCORE-LPC3180 Manuel de programmation

Phytec

Phytec L-1029e.A1 Manuel utilisateur

Phytec

Phytec Cosmic-AM335 Series Manuel utilisateur

Phytec

Phytec ATOM phyCORE-Z500P(T) Manuel utilisateur

Phytec

Phytec L-808e.A4 Manuel utilisateur

Phytec

Phytec phyCORE-i.MX 8M Plus Manuel utilisateur

Phytec

Phytec phyCORE-LPC3180 Manuel utilisateur

Phytec

Phytec phyCORE-PXA270 Manuel de programmation

Phytec

Phytec phyCORE-i.MX 8M Mini Manuel utilisateur

Phytec

Phytec phyCORE-MPC5554 Manuel utilisateur

Phytec

Phytec phyCORE-MPC5676/57 Series Manuel utilisateur

Phytec

Phytec IoT-Enablement-Kit 4 Manuel utilisateur

Phytec

Phytec phyCORE-TC399 Manuel utilisateur

Phytec

Phytec L-1014e.A4 phyBOARD-Mira Manuel utilisateur

Phytec

Phytec L-863e.A2 phyCORE-i.MX 8M Manuel utilisateur

Phytec

Phytec phyCORE-PXAG49 Manuel de programmation

Phytec

Phytec phyCORE-i.MX 8M Mini Manuel utilisateur

Phytec

Phytec L-1017e.A3 i.MX 8M Plus Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

Phytec phyCORE-DS80C390 Manuel de programmation

Manuels Matériel informatique populaires d'autres marques