Photoneo MotionCam-3D M Manuel utilisateur
MotionCam-3D
User Manual and Installation Instructions
11/2020
Thank you for choosing Photoneo® MotionCam-3D. Please take a few minutes to read this manual and
become familiar with the device.
For more information on our products, accessories, replacement parts, software and services, see our website
photoneo.com/motioncam-3d/ or contact our team at [email protected].
Legal Information
Warning Notice System
This manual contains notices that should be observed in order to ensure personal safety, as well as prevent
damage to equipment. The notices referring to personal safety are highlighted with a safety alert symbol,
while notices referring only to equipment do not have a safety alert symbol. The notices are graded according
to the degree of danger.
If more than one degree of danger is present, the warning notice representing the highest degree of danger is
used. Notice warning of injury to persons with a safety alert symbol may also include a warning relating to
equipment damage.
⚠ WARNING
Indicates that death or severe personal injury may result if proper precautions are not taken.
⚠ CAUTION
When a safety alert symbol is shown, it indicates that minor personal injury can result if proper precautions
are not taken.
CAUTION
When no safety alert symbol is shown, it indicates that equipment damage can result if proper precautions
are not taken.
NOTICE
Indicates that an unintended result or situation can occur if the relevant information is not taken into account.
11/2020
Qualified Personnel
The device described in this documentation may be operated only by qualified personnel. Qualified personnel
are those who, based on their training and experience, are capable of identifying risks and avoiding potential
hazards when working with this device.
Installation, commissioning, use, decommissioning and disposal of this device should be done in accordance
with relevant documentation, in particular, its warning notices and safety instructions.
Proper Use of Photoneo Products
Please note the following:
⚠ WARNING
Photoneo products may only be used in accordance with relevant technical documentation. If products and
components from other manufacturers are used, these must be recommended or approved by Photoneo.
Proper transport, storage, installation, assembly, commissioning, operation, and maintenance are required to
ensure that the products operate safely and without any problems. The permissible ambient conditions for
storage or operation of the device must be complied with. All information provided in the relevant
documentation must be observed.
11/2020
Preface
Purpose and Scope of the Manual
This manual provides information about the installation and usage of MotionCam-3D. This document is
designed for engineers, installers, and electricians who possess a general knowledge of automation.
Trademarks
All names identified by ® are registered trademarks of Photoneo s.r.o. The remaining trademarks in this
publication may be trademarks that when used by third parties for their own purposes could violate the rights
of the owner.
11/2020
Table of Contents
Product Overview 7
General Information 7
Laser Device 8
Objects Suitable for Scanning 9
Scope of Delivery 10
Installation 11
Guidelines for Installation 11
Powering the Device & Data Connection 11
Powering Through PoE Connector 12
Powering by 24V 12
Status LEDs 13
Supported Network Topologies 14
Mounting Restrictions 15
Movement During Scanning 15
Strong Electric Field 15
Clearance for Cooling and Wiring 15
Configuration 16
PhoXi Control 16
Hardware Parameters 18
Power Over Ethernet Connector 18
Powering Requirements 18
24V Power Connector 19
Powering Requirements 19
Projection Unit 20
Environmental Conditions 20
Transport 20
Operation 20
Scanning Parameters 21
Operation Temperature 21
Cleaning Instructions 27
Compliance with Standards 28
CE 28
Laser Classification 28
Degree of Protection 28
Warranty 28
Dimensions and Illustrations 29
Bottom View: Mounting Plate 29
11/2020
Product Overview
MotionCam-3D is a high accuracy and high resolution snapshot 3D area scanning device for large work areas
that can be in motion.
The product is based on a patented CMOS sensor and Parallel Structured Light technology developed by
Photoneo. It provides the scanning quality of structured light devices with the ability to scan dynamic scenes.
The scanning process consists of capturing the scene under the laser illumination and processing and transfer
of the 3D data to the computer running the driver software (see section PhoXi Control).
General Information
General information about the device and the manufacturer can be located on the back panel of the device.
Label with manufacturer address, product name, and model, CE, FCC, WEEE
and RoHS marks, country of origin and input options.
⚠ WARNING
Hot surface warning
The surface of the processing unit may become hot to touch when the device is in use. Mount the device on a
metal mounting plate that will act as a thermal bridge to dissipate the heat or use the carbon body to
manipulate the device.
11/2020
Laser Device
The laser projector aperture is located at the right side of the front panel of the device (Figure 1). The aperture
is clearly marked with a warning label. Do not look directly into the laser projector while the device is in use.
To avoid unauthorized contact with the device or unintentional viewing of the laser beam, it is recommended
to locate the device in a restricted area and take measures to restrict laser light exposure to the surroundings.
Although diffuse reflections are not harmful, users should remove mirrors, polished objects, and similar items
from the vicinity of the device to avoid specular reflections.
All components of the device, including those sourced from 3rd party suppliers, conform fully with all
applicable European directives and regulations.
The device uses the following labels and warning systems. Apart from the laser aperture label, all are located
on the back panel of the device.
⚠ WARNING
This device is a laser product. Do not deliberately look into the laser beam. This may cause injury to the retina.
The use of protective eyewear is usually not necessary. The appropriate laser class label is present on the
back of the device.
Figure 1: MotionCam-3D laser aperture location
Laser radiation hazard warning symbol.
11/2020
Objects Suitable for Scanning
MotionCam-3D uses laser light to acquire 3D data. It can capture dynamic scenes as well as static ones. Smoke
and particles dispensed in the air will negatively influence the 3D data. Always bear in mind that
MotionCam-3D can see no more than you can see with the naked eye.
Objects most suitable for scanning are (including and not limited to):
■rough surface objects, for example, wood, rubber, etc.
■objects with a matte finish, such as sand-blasted aluminum, cast iron, etc.
■molded, un-polished plastic materials.
Some objects not suitable for scanning (including and not limited to):
■mirrors and polished metals,
■most liquids (e.g. water, oil),
■translucent and transparent objects (e.g. glass, transparent plastic)
Laser aperture label. Designates the place from which laser radiation is emitted.
Laser Class 3R devices
Laser radiation warning with laser class label. The serial number of the device can be
found above the warning labels.
Label specifying wavelength, average power, pulse energy and pulse length of the
laser. Used on MotionCam models S+, M, M+, L.
Label specifying wavelength, average power, pulse energy and pulse length of the
laser. Used on MotionCam model S.
11/2020
Scope of Delivery
■Selected model of MotionCam-3D
■Desktop PoE injector (input: 90 ~ 264VAC, output: 33.6W, 56V, IEEE802.3at) with power cable (1.8m)
■Ethernet cable M12-X male - RJ45 male, 5m, PUR
NOTICE
Software components are needed for operation of the MotionCam-3D. See section Configuration for more
information.
Autres manuels pour MotionCam-3D M
1
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels Photoneo Scanner
Photoneo
Photoneo PhoXi Manuel utilisateur
Photoneo
Photoneo PhoXi 3D Scanner M Manuel utilisateur
Photoneo
Photoneo PhoXi Manuel utilisateur
Photoneo
Photoneo PhoXi Manuel utilisateur
Photoneo
Photoneo PhoXi 3D Scanner XS Manuel utilisateur
Photoneo
Photoneo PhoXi 3D Scanner M Manuel utilisateur
Photoneo
Photoneo PhoXi XS Manuel utilisateur
Photoneo
Photoneo PhoXi 3D Scanner S Manuel utilisateur
Photoneo
Photoneo PhoXi 3D Scanner S Manuel utilisateur
