Phonak CROS P-13 Manuel utilisateur
Phonak CROS P
User Guide
Phonak CROS P-13
3
Your CROS device details
CROS device models
cCROS P-13
Earpieces
cDome
cSlimTip
cCROS Tip
Battery size
13
If no box is checked and you do not know the model
of your CROS device, please ask your hearing care
professional.
Your CROS device operates between 2.4 GHz–2.48GHz
frequency range. When ying please check if ight
operator requires devices to be switched into ight
mode, see chapter 11.
CROS device model
Phonak CROS P-13
This user guide is valid for:
4 5
Your CROS device have been developed by Phonak —
a world leader in hearing solutions based in Zurich,
Switzerland.
These premium products are the result of decades of
research and expertise and are designed to keep you
connected to the beauty of sound! We thank you for
making such a great choice and wish you many years of
listening pleasure.
Please read the user guide carefully to make sure that you
understand and get the best out of your CROS device.
Training is not required for handling of this device.
A hearing care professional will help set up this CROS
device according to your individual preferences during
the tting consultation.
For more information regarding features, benets, set
up, use, maintenance or repairs of your CROS device
and accessories, please contact your hearing care
professional or the manufacturer representative.
Additional information can be found in the datasheet
of your product.
Phonak – life is on
www.phonak-us.com
6
Contents
Your CROS device
1. Quick guide
2. Parts of the CROS device
Using the CROS device
3. Left & right CROS device markings
4. On/O
5. Batteries
6. Putting on the CROS device
7. Removing the CROS device
8. Multi-function button
9. Connectivity overview
10. Initial pairing
11. Phone calls
12. Flight mode
8
10
12
13
14
16
17
18
19
20
23
27
7
Further Information
13. Operating, transport and storage conditions
14. Care and maintenance
15. Exchanging the earpice from the tube
16. Service and warranty
17. Compliance information
18. Information and description of symbols
19. Troubleshooting
20. Important safety information
21. For the US market only, complies with the
FDA regulations
29
30
33
35
37
44
50
52
66
8
1. Quick guide
Left & right markings
Changing batteries
12 3
Blue marking for left side.
Red marking for right side
Remove the
stickerfrom the
new battery and
wait two minutes.
Open the
batterydoor.
Place battery in
the battery door
with the “+”
symbol facing
upwards.
On/O
Multi-function button
Flight mode
The button has several functions.
It functions as a volume control in the
absence of wireless transmission of sound
from the CROS device to the hearing aid,
a balance control when there is a wireless
transmission of sound from the CROS
device to the hearing aid and/or
aprogram change depending on the
CROS device programming. This is
indicated in your individual instructions.
If paired with a Bluetooth® enabled
phone, a short press will accept and a
long press will reject an incoming call.
To enter ight mode press the lower
part of the button for 7 seconds while
closing the battery door. To exit ight
mode, simply open and close the
battery door again.
OOn
9
10 11
CROS P-13
2. Parts of the CROS device
The following pictures show the CROS device model
described in this user guide. You can identify your
personal model by checking “Your CROS device details”
on page 3.
Possible earpieces
Phonak CROS device + Phonak hearing aid =
Phonak CROS system
Phonak CROS P only works in connection
with a Phonak Audéo™ P hearing aid as the receiver.
Battery door
Anchor (optional)
Multi-function button
Tube
Speaker dummy
(without earpiece attached)
The Phonak CROS device is an application for unaidable
hearing loss on one side. It is placed on the impaired ear
and wirelessly transmits sound to the Phonak hearing aid
on the other ear.
CROS TIP
SlimTipDome
12 13
3. Left & right CROS device markings
There is a red or blue marking on the back of the CROS
device and on the speaker dummy. This will tell you if
the CROS device is meant to be worn on the left or the
right ear.
Blue marking for left side.
Red marking for right side.
4. On/O
The battery door is also the on/o switch.
1.
Closed battery door =
hearingaid is on
2.
Open battery door =
hearingaid is o
When you switch on the CROS device you might
hear a start-up melody in the hearing aid.
14 15
5. Batteries
Remove the
stickerfrom the
new battery and
wait two minutes.
Open the
batterydoor.
Place battery in
the battery door
with the “+”
symbol facing
upwards.
If it is dicult to close the battery door, check that
the battery is inserted correctly and the “+” symbol
is facing upwards. If the battery is not inserted
correctly, the CROS device will not work and the
battery door could be damaged.
Low power: You will hear two beeps when the battery
is low. You will have approximately 30 minutes to
change the battery (this can vary, depending on the
hearing aid settings and battery). We recommend that
you always have a new battery on hand.
1. 2. 3.
Please ensure you use the correct type of battery in
your CROS device (zinc-air). Please also read chapter
20.2 for further information on product safety.
Replacement battery
This CROS device requires a 13 zinc-air battery. Identify
the correct battery size by checking the following table.
Model
Phonak CROS
P-13T
Zinc-air
battery
size
13
Color
marking on
package
orange
IEC
code
PR48
ANSI
code
7000ZD
16 17
6. Putting on the CROS device
Place the CROS device behind
your ear.
Insert the earpiece into your
ear canal.
1.
2.
7. Removing the CROS device
Pull on the bend of the tube
and remove the CROS device
from behind the ear.
1.
3.
If there is an anchor attached
to the earpiece, tuck it into
the bowl of your ear to secure
your hearing aid.
18 19
8. Multi-function button
It functions as a volume
control in the absence of
wireless transmission of
sound from the CROS device
to the hearing aid, a balance
control when there is a
wireless transmission of
sound from the CROS device
to the hearing aid and/or a
The multi-function button has several functions.
program change depending on the CROS device
programming. This is indicated in your individual “CROS
device instructions.” Please ask your hearing care
professional for a printout.
If the CROS system is paired with a Bluetooth enabled
phone, a short press on the upper or lower part of the
button will accept an incoming call and a long press will
reject an incoming call — refer to chapter 10.
9. Connectivity overview
The illustration below shows the connectivity options
available for your CROS system.
* The TV Connector can be connected to any audio source such as a TV, PC or hi- system.
** Roger wireless microphones can be connected to your CROS system as well.
Bluetooth® enabled
device, e.g. cell
phone
TV Connector connected to TV*
Roger**
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Sonova AG is under license.
Table des matières
Autres manuels Phonak Prothèse auditive
Phonak
Phonak Certena Manuel utilisateur
Phonak
Phonak Lyric2 Manuel utilisateur
Phonak
Phonak Audeo M Series Manuel utilisateur
Phonak
Phonak ComPilot Manuel utilisateur
Phonak
Phonak CROS L-R Manuel utilisateur
Phonak
Phonak Brio 4 B-312 Manuel utilisateur
Phonak
Phonak M H20 Manuel utilisateur
Phonak
Phonak EduLink S Manuel utilisateur
Phonak
Phonak ComPilot Manuel utilisateur
Phonak
Phonak MLxi Instructions de montage
Phonak
Phonak Q90 Manuel utilisateur
Phonak
Phonak Brio 4 I Manuel utilisateur
Phonak
Phonak RogerDirect Roger X Manuel utilisateur
Phonak
Phonak Q90 Manuel utilisateur
Phonak
Phonak Una Manuel utilisateur
Phonak
Phonak PicoForte3 Manuel utilisateur
Phonak
Phonak roger Manuel utilisateur
Phonak
Phonak Virto M90-312 Manuel utilisateur
Phonak
Phonak Certena SR Manuel utilisateur
Phonak
Phonak Q90 Manuel utilisateur
Manuels Prothèse auditive populaires d'autres marques
Williams Sound
Williams Sound SoundPlus WIR 237 Mode d’emploi
Oticon Medical
Oticon Medical Ponto SoundConnector Manuel utilisateur
Siemens
Siemens Life micon Manuel utilisateur
Starkey
Starkey Destiny Manuel utilisateur
Audicus
Audicus The Icon Manuel utilisateur
Advanced Bionics
Advanced Bionics Slim HP Standard Manuel utilisateur
