Philips FM01SW80/27 Manuel utilisateur

USB memory key

User manual 2

Mode d’emploi 10

Instrucciones de manejo 17

Bedienungsanleitung 24

Istruzioni per l’uso 31

Manual de utilização 38

Инструкции по использованию

Click here

Cliquez ici

Haga clic aquí

Hier klicken

Fare clic qui

Clique aqui

Щелкните здесь

FM01SW80 FM01SW40 FM01SW20 FM01SW60

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

The shielded interface cable and connectors must be used in order to comply with the limits for digital

device pursuant to subpart B of Part 15 of FCC Rules.

Electric-, Magnetic- and Electromagnetic Fields (EMF)

1. Philips Royal Electronics manufactures and sells many products targeted at consumers, which, like

any electronic apparatus, in general have the ability to emit and receive electro magnetic signals.

2. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our

products, to comply with all applicable legal requirements and to stay well within the EMF standards

applicable at the time of producing products.

3. Philips is committed to develop, produce and market products that cause no adverse health effects.

4. Philips confirms that if its products are handled properly for their intended use, they are safe to use

according to scientific evidence available today.

5. Philips plays an active role in the development of international EMF and safety standards, enabling

Philips to anticipate further developments in standardization for early integration in its products.

Thank you for buying this Active Crystals product. Designed by women for women, your Active Crystals

product is an object of best craftmanship, executed in the finest Swarovski crystal including state of the

art technology of Philips. We wish you a truly enjoyable experience.

Note: Keep this detailed user manual for future reference.

WARNING

• To prevent fire or shock hazard, do not expose the unit to rain or moisture.

• To avoid electric shock, do not open the cabinet. Refer servicing to qualified personal only.

• Keep away from children. If swallowed, promptly see a doctor.

Note: Data is safe in the following environments: In X-ray security systems at airports and in magnetic

fields with strengths not exeeding 3,500 Oe.

For customers in the U.S.A.

Changes or modifications made to this equipment not expressly approved by company may void the FCC

authorization to operate this equipment.

Operation is subject to the following two conditions:

(1) this device my not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

Welcome

Important information

CAUTION:

You are cautioned that any changes or modifications not expressly approved in this manual could void

your authority to operate this equipment.

For customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.

For customers in Europe

This product conforms to the following European Directives: 89/336/EEC, 2006/95/EEC (safety

directive) and 93/68/ECC (EC Marking Directive). This product complies with EN55022 Class B and

EN55024 for use in the following areas; residential, commercial, and light-industrial.

Notes on Use

•The USB memory key may not function correctly if it is connected to the computer when the

computer is started up, restarted, or restored from sleep mode. Always disconnect the USB memory

key from the computer before performing any of these operations.

•Do not place the drive in locations that are:

– extremely hot or cold;

– vibrating;

– exposed to corrosive gases;

– dusty or dirty;

– very humid;

– exposed to direct sunlight.

•Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and

other countries.

•Mac and Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other

countries.

•Other system names and product names that appear in this manual are registered trademarks or

trademarks of their respective owners. Note that the ™and ®symbols are not used in this manual.

•Power consumption in standby mode: < 100 mA.

•To help maintain the luster and beauty of your Active Crystals piece of time, carefully polish the

product with soft, lint-free cloth. Avoid contact with harsh cleansers.

Important information

•The Company cannot accept any liability for financial damages, lost profits, claims from third

parties, etc., arising from the use of the software provided with this unit.

•The software specifications may be subject to change without notice.

•For detailed warranty instructions, please refer to the printed certificate booklet.

Environmental information

Disposal of your old product

Your product is designed and manufactured with high quality materials and components, which can be

recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by

the European Directive 2002/96/EC. Please inform yourself about the local separate collection system

for electrical and electronic products. Please act according to your local rules and do not dispose of your

old products with your normal household waste. The correct disposal of your old product will help

prevent potential negative consequences for the environment and human health.

The making of unauthorized copies of copy-protected material, including computer programmes, files,

broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal

offence.

This equipment should not be used for such purposes.

Important information

Microsoft®Windows®Vista, XP, 2000, ME or MACOS 9.0 or higher:

•The USB memory key driver is installed automatically when the drive is connected to a USB port of

the computer. However, with some USB 2.0 cards or boards, you may need to initiate installation

manually. In this case, follow the on screen instructions to search for a suitable driver. Refer to the

operating system's Help file if you need any help.

Note: Do not remove the USB memory key from the computer USB port as long as the download process

is in progress.

Windows 98SE:

1Download the device driver at www.active-crystals.com.

2Insert the memory key USB connector into one of the computer’s USB ports.

> The New Hardware wizard starts.

3Click the Next button.

4Click Search for the best driver for your device. Then click the Next button.

5Click Specify a location. Then click the Browse button.

6When the dialog box appears, specify the folder where the installation program is stored.

7Click the OK button to close the dialog box. Then click the Next button.

8Click the Next button.

9Click the Finish button.

> Installation of the driver starts.

> Once the installation process is complete, a drive icon for the USB memory key appears in the

My Computer window.

10 After confirming that the drive is in standby mode you can remove the drive from the computer’s

USB port.

Install

Connecting the USB memory key to your computer

Note: If the USB port of your computer is not easily accessible, you can use a USB extension cable or

an optional USB hub to connect the USB memory key to your computer.

1Remove the protective cap from the USB connector.

2Insert the memory key USB connector into one of the computer’s USB ports.

Operating the USB memory key

•Once the USB memory key is connected to the USB port of the computer:

– it is possible to start up a software package, enabling you to activate various applications.

See the software help file for futher instructions.

– the drive icon for the USB memory key will appear. You can now copy and save data on the drive by

dragging files and folders on the drive icon, just like when you copy data to a hard disk, CD-ROM,

DVD or floppy disk.

Notes:

– Do not remove the USB memory key from the computer USB port while copying and saving data

otherwise the drive will no longer be recognized by your system.

– When operating under Windows the drive name varies, depending on your Windows version.

Connect

Enjoy

Disconnecting the USB memory key from your computer

Windows®98SE

•After confirming that the USB memory key is in standby mode you can remove the memory key from

the computer’s USB port.

Windows

ME and Windows

2000

1Double-click the Unplug or eject hardware icon in the task bar in the lower right part of the screen.

2In the window that appears, select the name of the device that is to be removed, then click the STOP

button.

3When the Stop a hardware device screen appears, make sure the correct information is displayed, then click

the OK button.

4When a message appears, indicating that the USB memory key can be safely removed, remove the USB

memory key from the computer’s USB port.

Windows XP

1Double-click the Safely Remove Hardware icon in the task bar in the lower right part of the screen.

2In the window that appears, select the name of the device that is to be removed, then click the STOP

button.

3When the Stop a hardware device screen appears, make sure the correct information is displayed, then

click the OK button.

4When the message Safe to Remove Hardware appears, remove the the USB memory key from the

computer’s USB port.

Mac OS 9.0 and higher

1Drag the drive icon to the Trash.

2After confirming that the the USB memory key is in standby mode, remove the the USB memory key

from the computer’s USB port.

Enjoy

Interface High-Speed USB 2.0 (backwards compatible with USB 1.1)

Transfer rate Read: 8MB per second / Write: 3MB per second (High-speed USB 2.0 port

required to achieve maximum speed)

Compatible OSs • Microsoft® Windows®Vista, XP, 2000, ME and 98SE (with driver)

•Mac OS 9.0 or later

•Linux 2.4.0 or later

Online help: www.active-crystals.com

For interactive help, frequently asked questions, software updates and support.

Technical specifications

Need help?

Merci d’avoir acheté ce produit Active Crystals. Conçu par des femmes pour des femmes, votre produit

Active Crystals a été fabriqué avec une grande habileté, exécuté à partir du plus beau cristal Swarovski,

intégrant la technologie de pointe Philips. Nous vous souhaitons une utilisation très agréable.

Remarque : Conservez ce mode d’emploi détaillé pour vous y reporter à l’avenir.

AVERTISSEMENT

• Pour éviter tout risque de choc électrique ou d’incendie, protéger cet appareil contre la pluie et l’humidité.

• Pour éviter les chocs électriques, ne pas ouvrir le boîtier. Confier les réparations seulement à un réparateur

qualifié.

• À tenir à l’écart des enfants. Si avalé, consulter un médecin immédiatement.

Remarque: Les données ne courent aucun risque dans les environnements suivants: systèmes de sécurité à

rayons X dans les aéroports; champs magnétiques d’une force inférieure à 3 500 Oe.

Pour les clients situés aux États-Unis

Toute modification apportée à l’appareil sans l’autorisation expresse du fabricant peut annuler

l’autorisation du FCC d’utiliser cet appareil.

Son utilisation est soumise aux deux conditions suivantes :

(1) cet appareil ne doit pas causer de brouillage nuisible,

(2) cet appareil doit accepter tous les brouillages reçus, y compris ceux susceptibles de compromettre

son fonctionnement.

Bienvenue

Informations importantes

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Philips Stockage

Philips

Philips FM02SW10 Manuel utilisateur

Philips

Philips Swarovski FM01SW40/00 Manuel utilisateur

Philips

Philips SPD5115CC Manuel utilisateur

Philips

Philips SPD5400CC/00 Manuel utilisateur

Philips

Philips SPD5220 Manuel utilisateur

Philips

Philips FM08FD20B Manuel utilisateur

Philips

Philips Moon FM12FD165B/00 Manuel utilisateur

Philips

Philips FM01FD05B Manuel utilisateur

Philips

Philips FM02SW31/27 Manuel utilisateur

Philips

Philips FM04FD02B/00 Manuel utilisateur

Philips

Philips Swarovski FM01SW21/27 Manuel utilisateur

Philips

Philips Lock In FM01SW60 Manuel utilisateur

Philips

Philips SPE3071CC/05 Manuel utilisateur

Philips

Philips FM02SW00 Manuel utilisateur

Philips

Philips FM02FD20B/00 Manuel utilisateur

Philips

Philips CD740RW Manuel utilisateur

Philips

Philips FM04FD30B/00 Manuel utilisateur

Philips

Philips FM16FD02B/00 Manuel utilisateur

Philips

Philips SPD5210CC/00 Manuel utilisateur

Philips

Philips FM01FD05B/00 Manuel utilisateur

Philips

Philips FM01SW81 Manuel utilisateur

Philips

Philips FM FD35B Series Manuel utilisateur

Philips

Philips FM32FD05B/00 Manuel utilisateur

Philips

Philips FM24SS130B/00 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur