Philips SBA3210/37 Manuel utilisateur
Register your product and get support at
www.philips.com/welcome
SBA3210/37
User manual
1 Important
Safety
Important Safety Instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
h Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that
produce heat.
i Only use attachments/accessories specied by the manufacturer.
j Refer all servicing to qualied service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
k Apparatus shall not be exposed to dripping or splashing.
l Do not place any sources of danger on the apparatus (e.g. liquid
lled objects, lighted candles).
Warning
•Never remove the casing of this apparatus.
•Never lubricate any part of this apparatus.
•Never place this apparatus on other electrical equipment.
Notice
Any changes or modications made to this device that are not expressly
approved by Philips Consumer Lifestyle may void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1 this device may not cause harmful interference, and
2 this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules and ICES-003 of Industry Canada . These limits are designed
to provide reasonable protection against harmful interference in a
residential installation.This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Disposal of your old product
Your product is designed and manufactured with high quality materials
and components, which can be recycled and reused.
Never dispose of your product with other household waste. Please
inform yourself about the local rules on the separate collection of
electrical and electronic products and batteries.The correct disposal of
these products helps prevent potentially negative consequences on the
environment and human health.
Your product contains batteries, which cannot be disposed of with
normal household waste. Please inform yourself about the local rules on
separate collection of batteries.The correct disposal of batteries helps
prevent potentially negative consequences on the environment and
human health.
Please visit www.recycle.philips.com for additional information on a
recycling center in your area.
Always bring your product to a professional to remove the built-in
battery.
Environmental information
All unnecessary packaging has been omitted.We have tried to make
the packaging easy to separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled and reused
if disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging materials, exhausted
batteries and old equipment.
The making of unauthorized copies of copy-protected material, including
computer programs, les, broadcasts and sound recordings, may be
an infringement of copyrights and constitute a criminal offence.This
equipment should not be used for such purposes.
Note
•The type plate is located on the bottom of the apparatus.
2 Get started
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number
of this apparatus.The model number and serial number are on the
bottom of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
What’s in the box
Power supply
The speaker can operate on built-in rechargeable battery.
To recharge the built-in battery:
Connect your speaker with PC through supplied cable.
» The power indicator turns on.(white)
• The power indicator turns off when it’s fully charged.
Play
1 Connect your two speakers with supplied cable.
2 Connect your device to the speaker.
3 Slide the switch to turn the speaker on.
» The power indicator turns on.
4 Adjust the volume and navigate your audio content on your device.
5 After use,disconnect your device from the speaker and slide the
switch to turn the speaker off.
3 Product information
Note
•Product information is subject to change without prior notice.
Specications
Amplier
Rated Output Power 2 x 2W RMS
Signal to Noise Ratio >70dB
Aux-in Link 600 mV RMS, 10 kohm
General information
DC power input USB: 5V, 500mA
Built-in Li-Polymer battery 3.7V 500mAH, each unit
Battery working time >8 hours
Dimensions-Main Unit
(diameter x height) D56 mm* H80mm
Weight- Main Unit 0.17 kg *2
4 Troubleshooting
Warning
•Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the
following points before requesting service. If the problem remains
unsolved, go to the Philips web site (www.philips.com/welcome). When
you contact Philips, ensure that the apparatus is nearby and the model
number and serial number are available.
No power: Recharge your speaker.
No sound : Adjust volume on your device.
No response from the speaker : Restart the speaker.
All registered and unregistered trademarks are property of their
respective owners.
© 2012 Koninklijke Philips Electronics N.V.
All rights reserved.
SBA3210_37_UM_V1.0
Table des matières
Autres manuels Philips Intervenants
Philips
Philips HTL2160 Manuel utilisateur
Philips
Philips CSP550 Manuel utilisateur
Philips
Philips BT2500 Fiche d'information produit
Philips
Philips BT5580 Manuel utilisateur
Philips
Philips SPA6350/10 Manuel utilisateur
Philips
Philips Fidelo E5 Manuel utilisateur
Philips
Philips SBT75/12 Manuel utilisateur
Philips
Philips NTRX700 Fiche d'information produit
Philips
Philips Fidelio B5 Manuel utilisateur
Philips
Philips SPA2360 Manuel utilisateur
Philips
Philips AD7000W/37 Manuel utilisateur
Philips
Philips AW5000 Manuel utilisateur
Philips
Philips MMS460/05 Manuel utilisateur
Philips
Philips SPA7360/05 Manuel utilisateur
Philips
Philips S5305 Manuel utilisateur
Philips
Philips MMS8080B Manuel utilisateur
Philips
Philips SPA4355 Manuel utilisateur
Philips
Philips MX2600/77 Manuel utilisateur
Philips
Philips HTB4150B Manuel utilisateur
Philips
Philips FB698/00B Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur