Philips SB365 Manuel utilisateur

www.philips.com/welcome

User manual

Always there to help you

SB365

Question?

Contact

Philips

1EN

Contents

1 Important 2

Safety 2

2 Your Bluetooth speaker 3

Introduction 3

What's in the box 3

Overview of the speaker 4

3 Get started 5

Power supply 5

Turn on 5

4 Play from Bluetooth-enabled devices 6

Connect a device 6

Play from Bluetooth device 7

Clear the pairing information 7

5 Other features 7

Charge your mobile devices 7

Listen to an external device 7

Adjust volume 8

6 Product information 8

Specications 8

7 Troubleshooting 9

General 9

About Bluetooth device 10

8 Notice 10

Disposal of your old product and

batteries 11

2EN

1 Important

Safety

Warning

•Never remove the casing of this speaker.

•Never lubricate any part of this speaker.

•Never place this speaker on other electrical equipment.

•Keep this speaker away from direct sunlight, naked

amesorheat.

Important safety instructions

a Read these instructions.

b Keep these instructions.

c Heed all warnings.

d Follow all instructions.

e Do not use this apparatus near water.

f Clean only with dry cloth.

g Do not block any ventilation openings.

Install in accordance with the

manufacturer's instructions.

h Do not install near any heat sources such

as radiators, heat registers, stoves, or

other apparatus (including ampliers) that

produce heat.

i Protect the power cord from being

walked on or pinched, particularly at

plugs, convenience receptacles, and the

point where they exit from the apparatus.

j Only use attachments/accessories

specied by the manufacturer.

k Unplug this apparatus during lightning

storms or when unused for long periods

of time.

l Refer all servicing to qualied service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

m Battery usage CAUTION – To prevent

battery leakage which may result in bodily

injury, property damage, or damage to

the unit:

• Install all batteries correctly, + and - as

marked on the unit.

• Do not mix batteries (old and new or

carbon and alkaline, etc.).

• Remove batteries when the unit is not

used for a long time.

n Battery shall not be exposed to excessive

heat such as sunshine, re or the like.

o Apparatus shall not be exposed to

dripping or splashing.

p Do not place any sources of danger on

the apparatus (e.g. liquid lled objects,

lighted candles).

q Where the plug of the Direct Plug-in

Adapter is used as the disconnect device,

the disconnect device shall remain readily

operable.

Note

•The type plate is located on the bottom of the

apparatus.

3EN

2 Your Bluetooth

speaker

Congratulations on your purchase, and

welcometoPhilips!Tofullybenetfromthe

support that Philips offers, register your product

at www.philips.com/welcome.

Introduction

With this product, you can

• play audio from Bluetooth-enabled devices,

or other external devices;

• charge your mobile devices.

What's in the box

Check and identify the contents of your

package:

• Main unit

• Power adaptor

• Audio-in cable

• Short user manual

•

4EN

Overview of the speaker

a NFC

• Connect a device with NFC feature

through Bluetooth.

• Bluetooth indicator.

• Turn on the speaker or switch to

standby mode.

• Disconnect the paired device.

• Enter Bluetooth pairing mode.

• Clear Bluetooth pairing information.

d - VOL/VOL +

• Adjust volume.

e CHARGING

• Charge mobile devices.

f AUDIO IN

• Connect an external audio device.

g DC IN

• Connect power.

5EN

3 Get started

Always follow the instructions in this chapter in

sequence.

Power supply

Either AC power or battery can be used as

power supply of this product.

Option 1: Battery power

Caution

•Risk of explosion! Keep batteries away from heat,

sunshine,orre.Neverdiscardbatteriesinre.

•Batteries contain chemical substances, so they should

be disposed of properly.

Note

•Batteries are not supplied with the accessories.

To install the batteries:

1 Open the battery compartment.

2 Insert 4 AA batteries with correct polarity

(+/-) as indicated.

3 Close the battery compartment.

Option 2:AC power

Caution

•Risk of product damage! Make sure that the power

voltage corresponds to the voltage printed on the back

or underside of the speaker.

•Risk of electric shock! When you unplug the AC

adapter, always pull the plug from the socket. Never

pull the cord.

Connect the power adaptor to:

• the DC IN socket at the back of the

speaker.

• the wall outlet.

Turn on

Press .

» The speaker switches to Bluetooth

mode.

» TheBluetoothindicatorbeginstoash.

Switch to standby mode

The speaker switches to standby mode in the

following situation:

• Press again;

• The connection with Bluetooth device or

other device is invalid for 15 minutes; or

• Music playback is stopped for 15 minutes.

6EN

4 Play from

Bluetooth-

enabled devices

With this product, you can listen to audio from

Bluetooth-enabled devices.

Connect a device

Note

•Make sure that your Bluetooth device is compatible

with this speaker.

•Before pairing a device with this speaker, read its user

manual for Bluetooth compatibility.

•The speaker can memorize a maximum of 4 paired

devices.

•Make sure that Bluetooth function is enabled on your

device, and your device is set as visible to all other

Bluetooth devices.

•Any obstacle between this speaker and a Bluetooth

device can reduce the operational range.

•Keep away from any other electronic device that may

cause interference.

Connect a device manually

Note

•The operational range between this speaker and a

Bluetooth device is approximately 10 meters (30 feet).

1 Press on the speaker.

» The Bluetooth indicator begins to

ash.

2 On your Bluetooth device, enable

Bluetooth and search for Bluetooth devices

(refer to the user manual of the device).

3 When [Philips SB365] is displayed on

your device, select it to start pairing and

connection. If necessary, enter default

password “0000”.

» After successful pairing and connection,

the speaker beeps twice, and the

Bluetooth indicator turns solid blue.

To disconnect the Bluetooth-enabled device:

• Press and hold for 3 seconds;

• Disable Bluetooth on your device; or

• Move the device beyond the

communication range.

To reconnect the Bluetooth-enabled device:

• For a paired Bluetooth device on which

the automatic reconnection is enabled,

this product reconnects with it once it is

detected.

• For a paired Bluetooth device that does

not support the automatic reconnection,

reconnect it with this product manually.

To connect another Bluetooth-enabled device:

• Disable Bluetooth on the current device,

and then connect another device.

Connect a device through NFC

Near Field Communication (NFC) is a

technology that enables short-range wireless

communication between various NFC

compatible devices, such as mobile phones and

IC tags.

If your Bluetooth device supports NFC, you can

connect it with this speaker easily.

1 Press on the speaker.

» The Bluetooth indicator begins to

ash.

2 Enable the NFC feature on your Bluetooth

device (see the user manual of the device

for details).

3 Touch the NFC tag on the speaker with

the back of your Bluetooth device.

7EN

4 On your Bluetooth device, accept the

pairing request with "SB365". If necessary,

input "0000" as the pairing password.

5 Follow the on-screen instructions to

complete the pairing and connection.

» After successful pairing and connection,

the speaker beeps twice, and the

Bluetooth indicator turns solid blue.

LED indicator Description

Flashing blue Connecting or waiting for

connection

Solid blue Connected

Play from Bluetooth device

After successful Bluetooth connection, play

audio on the Bluetooth device.

» Audio streams from your Bluetooth

device to the speaker.

Clear the pairing information

In Bluetooth mode, press and hold for 8

seconds.

» All the Bluetooth pairing information

is erased.

5 Other features

Charge your mobile devices

With this speaker, you can charge your mobile

devices through the CHARGING socket.

Note

•The USB socket is used for charging only.

• Connect to your mobile device with a USB

cable (not supplied).

» Once the device is recognized, the

charging starts.

Listen to an external device

With this speaker, you can also listen to an

external audio device such as an MP3 player.

1 Connect the supplied audio input cable to

• the AUDIO IN socket on this speaker,

and

• the headphone socket on the external

device.

CHARGING

8EN

» The speaker switches to the audio-in

mode automatically.

2 Play audio on the external device (refer to

its user manual).

Adjust volume

During play, press VOL + or - VOL to increase

or decrease volume.

6 Product

information

Note

•Product information is subject to change without prior

notice.

Specications

Amplier

Rated Output Power 2 X 4 W RMS

Signal to Noise Ratio > 65 dBA

AUX Input 600 mV

Bluetooth

Bluetooth version V4.0

Supportedproles A2DP, AVRCP

Range 10 m (Free space)

General information

Power Supply

- AC Power

(power adapter)

Brand name: PHILIPS;

Power adapter A:

Model: OH-

1015A0901660U1-UL;

Input: 100-240 V~,

50/60 Hz, 350 mA;

Output: 9 V 1.66 A;

Power adapter B:

Model: TPA103B-

15090-US;

Input: AC100-240 V~,

50/60 Hz, 1.1A MAX;

Output: 9 V 1.66 A;

- Battery 4 x 1.5 V LR6 AA

Autres manuels pour SB365

Table des matières

Autres manuels Philips Intervenants

Philips

Philips SPA2335 Manuel utilisateur

Philips

Philips HTD3520 Manuel utilisateur

Philips

Philips HSB3280 Manuel utilisateur

Philips

Philips SBCBC8210/06 Manuel utilisateur

Philips

Philips HTL2100 Manuel utilisateur

Philips

Philips SPA1210/05 Manuel utilisateur

Philips

Philips SPA5200/97 Manuel utilisateur

Philips

Philips HTL5110 Manuel utilisateur

Philips

Philips SPA2335 Manuel utilisateur

Philips

Philips SPA7210R/10 Manuel utilisateur

Philips

Philips SBT 10 Fiche d'information produit

Philips

Philips Fidelio AW3000 Manuel utilisateur

Philips

Philips BT3500 Manuel utilisateur

Philips

Philips SPA1210/05 Manuel utilisateur

Philips

Philips BT6000 Manuel utilisateur

Philips

Philips Fidelio SoundSphere Manuel utilisateur

Philips

Philips SPA9300 Manuel utilisateur

Philips

Philips BT2000R Manuel utilisateur

Philips

Philips HTL2161B/F7 Manuel utilisateur

Philips

Philips MMS223/17B Manuel utilisateur

Philips

Philips SPA2345 Manuel utilisateur

Philips

Philips SBCBM100/00 Manuel utilisateur

Philips

Philips Fidelio SoundRing DS3801W/37 Manuel utilisateur

Philips

Philips HTL2160 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur