Philips S7807 Manuel utilisateur

www.philips.com/support

User manual

Wireless Speaker

7000 Series

S7807

EN 1

Contents

1 Important 2

Safety 2

2 Your wireless speaker 3

Introduction 3

What's in the box 3

Overview of the speaker 3

4 Play from Bluetooth devices 5

Play from Bluetooth devices 5

Multi-point connection 6

Control playback

Control phone call

Trigger voice assistant of

your mobile device

Pairing for stereo mode

5 Product information 7

6 Troubleshooting 8

General 8

Bluetooth 8

7 Notice 9

Compliance 9

Care of the environment 9

FCC and IC statement 10

Trademark notice 10

3 Get started 4

Charge the built-in battery 4

Turn on/o

EN2

1 Important

Safety

Important safety instructions

• Make sure that the power supply

voltage corresponds to the voltage

on the back or the underside of

the unit.

• The speaker shall not be exposed

to dripping or splashing.

• Do not place any source of danger

on the speaker (e.g. liquid lled

objects, lit candles).

• Make sure that there is enough free

space around the speaker for

ventilation.

• Please use the speaker safely in an

environment with temperature

between 0℃and 45℃.

• Only use attachments and accessories

specied by the manufacturer.

Battery safety precautions

• Danger of explosion if a battery is

incorrectly replaced. Replace only

with the same or equivalent type.

• A battery (battery pack or battery

installed) shall not be exposed to

excessive heat such as sunshine,

re or the like.

• A battery in extreme high or low

temperatures during use, storage or

transportation, and low air pressure at

high altitude can pose safety hazards.

• Do not replace a battery with an

incorrect type that can defeat a

safeguard (for example, some lithium

battery types).

• Disposing a battery into re or a

hot oven, mechanically crushing

or cutting a battery can result in

an explosion.

• Leaving a battery in an extremely

high temperature surrounding, or

an extremely low air pressure

environment may result in an

explosion or leakage of ammable

liquid or gas.

Warning

• Never remove the casing of this speaker.

• Never lubricate any part of this speaker.

• Place this speaker on a at, hard and

stable surface.

• Never place this speaker on other

electrical equipment.

• Only use this speaker indoors. Keep this

speaker away from water, moisture and

liquid-lled objects.

• Keep this speaker away from direct

sunlight, naked ames or heat.

• Risk of explosion if a battery is replaced

by an incorrect type.

EN 3

What's in the box

Check and identify the contents of your

package:

• Speaker

• USB cables

• Quick start guide

• Safety sheet

• Worldwide warranty

• Strap

Overview of the speaker

324

9 7 56

2 Your wireless

speaker

Congratulations on your purchase, and

welcome to philips! To fully benet

from the support that philips oers,

www.philips.com/support.

• Enter Bluetooth pairing mode.

• Clear Bluetooth pairing

information.

•

Turn the speaker on or o.

• Press and hold to enter stereo

pairing mode.

• In Bluetooth mode, press to

pause or resume play.

• Respond to an incoming call

through Bluetooth connection.

• Press and hold to trigger voice

assistant of your mobile device.

• Decrease volume.

• Charge the built-in battery.

DC IN

• Increase volume.

6Microphone

Power/Bluetooth LED indicator

• Power/Bluetooth light.

Battery level indicators

• Show the charging progress.

• Show the battery level: To check

battery status, press any other

keys but not , as will trigger

the power o.

EN4

3 Get started

Always follow the instructions in this

chapter in sequence.

Charge the built-in

battery

The speaker is powered by a built-in

rechargeable battery.

Note

• Fully charge the built-in battery before

using.

• When the speaker is turned on and the

battery is low, the Power/Bluetooth

LED indicator blinks red.

Connect the USB-C socket on the

speaker to an outlet (5V 3A) by

using the provided USB cable.

INPUT: 5V 3A

OUTPUT: 5V 2A

LED 4LED 2LED 1 LED 3

Power/

Bluetooth LED

Power on

When the speaker is being charged,

Power/Bluetooth LED blinks red slowly.

When the speaker is fullycharged,

Power/Bluetooth LED is solid white.

The speaker could charge an external

device via USB cable.

Power o

When the speaker is being charged,

Power/Bluetooth LED blinks red slowly.

When the speaker is fully charged,

Power/Bluetooth LED is o.

Battery power

Full Solid white

Solid white OFF

OFF

Blinking

Red

Solid

white

Solid

white

OFF

LED1 LED2 LED3 LED4

Power/

Bluetooth LED

＞80%

50% - 80%

20% - 40%

Low battery ＜ 20%

EN 5

4 Play from

Bluetooth

devices

1Press to turn the speaker on. It

will enter Bluetooth pairing mode

automatically. You can also press

and hold for 3 seconds to enter

Bluetooth pairing mode.

2Enable Bluetooth and select

"Philips S7807" in the Bluetooth

list on your device for pairing.

If a message prompts for

permission for Bluetooth

connection, conrm it.

If a password is required, enter

0000 and then conrm.

Play audio on your Bluetooth

device to start music streaming.

Caution

• Risk of speaker damage! Make sure the

power supply voltage corresponds to the

voltage printed on the back or the

underside of the speaker.

• Risk of electric shock! When unplug the

USB cable, always pull the plug from the

socket. Never pull the cable.

• Use only a USB cable specied by the

manufacturer or sold with this speaker.

Note

The speaker will turn o automatically

if there is no audio signal from

Bluetooth for 15 minutes.

•

Press to turn the speaker on.

You will hear the prompt sound.

To turn the speaker o, press

You will hear the prompt sound.

again.

Play from Bluetooth

devices

With this speaker, you can enjoy audio

from your Bluetooth device.

Note

• Make sure that the Bluetooth function

is enabled on your device.

• The maximum distance for pairing the

speaker and your Bluetooth device is

20 meters (66 feet).

• Keep away from any other electronic

device that may cause interference.

EN6

Power/Bluetooth

LED indicator Description

Blinking white

quickly Ready for pairing

Blinking white

slowly

Reconnecting the last

connected device

Solid white Connected

Note

• To disconnect a device, press and hold

for 3 seconds until the Power/

Bluetooth LED indicator blinks white

quickly.

• To clear the pairing information, press

and hold for 8 seconds until the

Power/Bluetooth LED indicator blinks

white slowly for 3 times.

•Pair the speaker to two devices,

e.g. mobile phone and notebook.

Pairing

•Music can only be played from one

device at a time. The other device

will be reserved for phone calls.

•Pause the audio from one device to

start playing audio from the other

device.

Switch between devices

Note

• Receiving a call on Device 2 will pause

playback on Device 1. The call will be

routed automatically to your speaker.

• Ending the call will resume playback

from Device 1 automatically.

Multi-point connection

Control playback

During music playback

Press to pause or resume play

Press twice to play the next track

Adjust the volume

Control phone call

Press to answer or end a call

Press and hold to reject a call

Adjust the volume

Trigger voice assistant

of your mobile device

Press and hold to trigger voice

assistant of your mobile device

Adjust the volume

EN 7

5 Product

information

Note

• Product information is subject to change

without prior notice.

General information

USB port 5V 3A

Built-in Lithium battery 7.4V, 5000mAh

Dimensions (W x H x D)

280 x 104 x 104 mm

Operation Ambient

IP protection class

0 ℃~45 ℃

IP67*

Weight (main unit) 1896 g

Amplier

Output power (RMS) 40 W

Frequency response 60 Hz - 20 KHz

Signal to noise ratio > 75dB

Speaker

Impedance 4 Ω

Maximum input power 15 W

Drivers

Bluetooth

Bluetooth version 5.2

Frequency range 2402 - 2480 MHz

Maximum

transmition power

< 10 dBm

Compatible

Bluetooth proles

HFP V1.7

Bluetooth range up to 20 m

2 x 71 mm drivers

2 x 31 mm tweeters

Pairing for stereo mode

Two identical wireless speakers

(Philips S7807) can pair with each other

for stereo sound.

*The IP67 rating means the speaker driver is

dust tight and can be submerged for up to

30 minutes at a depth of up to 1 m.

Note

• Any speaker can be used as the primary

speaker.

• The speaker connected to a Bluetooth

device can only be used as the primary

speaker.

• Before stereo pairing, make sure that the

secondary speaker is under Bluetooth

pairing mode.

• Keep a maximum distance of 20 meters

(66 feet) between the speaker and your

Bluetooth device.

• In stereo mode, the button operation on

the secondary speaker is as same as that

of the primary speaker.

1Press to power on both speakers,

and they will enter Bluetooth pairing

mode automatically. The speaker

connected to your Bluetooth device

will be used as the primary speaker.

2On both speakers, press and hold

to enter stereo pairing mode until

the LED blinks red and white

alternatively. You will hear a prompt

sound when successfully connected

and Power/Bluetooth LED is solid

white.

3Press on either speaker. The

music will be played through both

speakers.

To exit the stereo mode, press and hold

the on either speaker.

Passive radiators 2

Troubleshooting

Warning

• Never remove the casing of the speaker.

To keep the warranty valid, never try to

repair the speaker yourself.

If you encounter problems when using

this speaker, check the following points

before requesting service. If the problem

remains unsolved, go to the Philips

website (www.philips.com/support).

When you contact philips, ensure that

the speaker is nearby and the model

number and serial number are available.

General

No power

• Make sure the speaker is fully

charged.

• Make sure the USB socket of the

speaker is properly connected.

• As a power-saving feature, the

speaker turns o automatically

15 minutes after no audio signal

is received.

No sound

• Adjust the volume on this speaker.

• Adjust the volume on the connected

device.

•

Make sure that your Bluetooth

device is within the operational

range.

No response from the speaker

• Restart the speaker.

Bluetooth

The audio quality is poor after

connection with a Bluetooth-enabled

device

•

The Bluetooth reception is poor. Move

the device closer to this speaker or

remove any obstacle between them.

Fail to nd [Philips S7807] on your

Bluetooth device for pairing

• Press and hold for 3 seconds to

enter Bluetooth pairing mode, and

then try again.

Cannot connect with your Bluetooth

device

• The Bluetooth function of your

device is not enabled. Refer to the

user manual of your device to nd

out how to enable the function.

• This speaker is not in pairing mode.

• This speaker is already connected to

another Bluetooth-enabled device.

Disconnect and try again.

EN8

EN 9

7 Notice

Compliance

Hereby, TP Vision Europe B.V. declares

that this product is in compliance with

the essential requirements and other

relevant provisions of Directive 2014/

53/EU. You can nd the Declaration of

Conformity on www.philips.com/support.

Care of the environment

Disposal of your old product and battery

Your product is designed and

manufactured with high quality

materials and components, which

can be recycled and reused.

This symbol on a product means that

the product is covered by European

Directive 2012/19/EU.

This symbol means that the product

contains batteries covered by European

Directive 2013/56/EU which cannot be

disposed of with normal household

waste.

Any changes or modifications made

to this device that are not expressly

approved by MMD Hong Kong Holding

Limited may void the user's authority to

operate the equipment.

Inform yourself about the local separate

collection system for electrical and

electronic products and batteries. Follow

local rules and never dispose of the

product and batteries with normal

household waste. Correct disposal of

old products and batteries helps prevent

negative consequences for the

environment and human health.

Environmental information

All unnecessary packaging has been

omitted. We have tried to make the

packaging easy to separate into three

materials: cardboard (box), polystyrene

foam (buer) and polyethylene (bags,

protective foam sheet).

Your system consists of materials which

can be recycled and reused if

disassembled by a specialized company.

Please observe the local regulations

regarding the disposal of packaging

materials, exhausted batteries and old

equipment.

Removing the integrated batteries

Make sure the product is disconnected

from power before removing the

integrated battery.

For illustration purposes only

Disposal of a battery into re or a hot

oven, or mechanically crushing or

cutting of a battery, can result in

an explosion.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Intervenants

Philips

Philips SW750M Manuel utilisateur

Philips

Philips STS9500/00 Manuel utilisateur

Philips

Philips HTL4110B Manuel utilisateur

Philips

Philips CSS5235Y/93 Manuel utilisateur

Philips

Philips SPA5200 Manuel utilisateur

Philips

Philips 4000 series Manuel utilisateur

Philips

Philips HTL2100 Manuel utilisateur

Philips

Philips BM90 Manuel utilisateur

Philips

Philips SBA3210/37 Manuel utilisateur

Philips

Philips HTL2163B Manuel utilisateur

Philips

Philips Fidelio AW3000 Manuel utilisateur

Philips

Philips SPA5200 Manuel utilisateur

Philips

Philips MMS430W Manuel utilisateur

Philips

Philips AD7000W/11 Manuel utilisateur

Philips

Philips AS 141 - Manuel utilisateur

Philips

Philips AD7000W/10 Manuel utilisateur

Philips

Philips SPA3200 Manuel utilisateur

Philips

Philips FWM185 Manuel utilisateur

Philips

Philips HTL3160B Manuel utilisateur

Philips

Philips PS1 Manuel utilisateur

Philips

Philips SB7260/37 Manuel utilisateur

Philips

Philips CSP1000 Manuel utilisateur

Philips

Philips SB365B Manuel utilisateur

Philips

Philips SW700M Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur