Philips TAW6205 Manuel utilisateur
User manual
TAW6205
Register your poduct and get support at:
www.philips.com/support
Wireless Home Speaker
1
2
3
4
5
6
8
9
7
Contents
Safety 3
Help and support 3
Important 3
What’s in the box 4
Overview of the speaker 4
Your wireless speaker 4
Plug in the power 6
Turn on and o 6
Get started 6
Connect to Wi-Fi (Wireless Operation) 7
Connect 7
Pairing with Ambilight TV 10
Follow Music 10
Mood Light mode 11
Adjust brightness 11
LED light O 12
Overview 12
Lighting operation 10
Play from Bluetooth devices 13
Control playback 13
Listen to an external device 13
Listen to Spotify 13
Upgrade Firmware 14
Play 13
Product specications 15
Notice 18
Troubleshooting 16
2
For 5G WiFi Device
Important safety instructions
Warning
Safety
Help and support
1 Important
Follow the instructions on the website to
select your language, and then enter your
product model number.
Alternatively, you can contact Consumer Care
in your country. Before you contact, note
down the model number and serial number
of your product.You can nd this information
on the back or bottom of your product.
x Make sure that the power supply voltage
corresponds to the voltage on the back or
the underside of the unit.
x The speaker shall not be exposed to
dripping or splashing.
x Do not place any source of danger on the
speaker (e.g. liquid filled objects, lit
candles).
x Make sure that there is enough free space
around the speaker for ventilation.
x Please use the speaker safely in an
environment with temperature between
0°C and 45°C.
x Only use attachments and accessories
specified by the manufacturer.
The device for operation in the band 5150–5350
MHz is only for indoor use to reduce the
potential for harmful interference to co-channel
mobile satellite systems.
x Never remove the casing of this speaker.
x Never lubricate any part of this speaker.
x Place this speaker on a flat, hard and stable surface.
x Never place this speaker on other electrical
equipment.
x Only use this speaker indoors. Keep this speaker
away from water, moisture and liquid-filled
objects.
x Keep this speaker away from direct sunlight, naked
flames or heat.
x Risk of explosion if a battery is replaced by an
incorrect type.
For extensive online support, visit
www.philips.com/support to:
x download the user manual and the quick
start guide
x watch video tutorials (available only for
selected models)
x find answer to frequently answered
questions (FAQs)
x email us a question
x chat with our support representative
3
Play, pause or resume in
Bluetooth/Play-Fiplayback.
Press and once to select next
LED light color.
Press to increase or decrease volume
.
Press and once to increase the
LED light brightness.
Press and once to decrease the
LED light brightness.
What’s in the box
Overview of the speaker
Wi-Fi LED indicator (White)
LED State Status
Double blink
Constant on
Blink
Wi-Fi Setup button
AC socket
For service
2 Your wireless
speaker
Congratulations on your purchase, and
product at www.philips.com/support.
Check and identify the contents of your
package:
Speaker
Power cable
Quick start guide
Safety sheet
Worldwide warranty
Indicate the status.
Press and hold for 3 seconds to enter
the pairing with Ambilight TV mode.
Press to select the LED light mode.
Wi-Fi Access Point (AP)
mode
Wi-Fi Protected Setup
(WPS) mode
Connected / Pairing
successful
Trigger Wi-Fi setup for Play-Fi.
Press and hold the button for 3
seconds to active the WPS mode.
Press and hold the button for 8
seconds to active the AP mode.
USB socket for speaker software
upgrade only. No playback function
.
Connect to the power supply.
10
11
4
BACK
TOP
*The rating label is placed on the bottom
side of the product.
10
11
AUX IN
RESET
Built-in LED light
x Press and hold to activate the pairing
function or disconnect the existing
paired Bluetooth device.
x Press with a sharp object for 5
seconds to restore factory defaults.
x Audio input socket (3.5mm) for an
external audio device.
5
Turn on and o
LED State Status
3 Get started
Plug in the power
x The speaker is powered by AC input.
x Connect the AC IN socket on the
speaker to an outlet (19V 2.1A) by
using the provided power cable.
x Risk of product damage! Ensure that
the power supply voltage
corresponds to the voltage printed on
the back or the underside of the unit.
Attempting to connect
to the router
Wi-Fi connection is
successful
Wi-Fi connection
failed
Turn around in blue
color for 20 seconds
Turn o
Blink red for 5
seconds
x The speaker will turn off automatically after 15 minutes
without user operations and music playback.
Note
Unplug the power cable from the main socket
to turn o the speaker.
6
(For iOS and Android version)
1
2
3
4
5
4 Connect
Connect to Wi-Fi (Wireless
Operation)
By connecting this unit and mobile phones,
tablets (such as iPad, iPhone, iPod touch,
Android phones, etc.) to the same Wi-Fi
network, you can then use the Philips
Sound app powered by DTS Play-Fi to
control the soundbar to listen to audio les.
Connect your phone or tablet to the
same Wi-Fi network that you want to
connect your wireless speaker.
Download and install the Philips
Sound app powered by DTS Play-Fi
on a phone or tablet.
Press and hold (Wi-Fi) button
located at the back cabinet for 8 sec to
trigger the Wi-Fi connection.
Until the speaker make a second
tone and then release the button.
x Make sure your router is turned on
and working properly.
Wait until the Wi-Fi light indicator on the
top panel turns from a fast blink to a
slow pulse. Slow pulsing indicates that
the speaker is entering the Wi-Fi setup
mode.
Launch the Philips Sound App powered
by DTS Play-Fi. Follow the instructions
in the App to connect this product to
your Wi-Fi network.
7
Fast blink Slow pulse
Two sound
Note
For iOS version only
x Go to Settings. x Select Wi-Fi setting.
6
7
8
After connection, you can change the
device name. There are several names
to choose from or create your own by
choosing Custom Name at the end of
the name list. Otherwise, it follows the
default name.
After connection, this product may
perform a software update. Upgrade to
the latest software when it is your rst
time set up. The software upgrade may
take several minutes. Do not unplug
your speaker, turn o your device, or
leave the network during the update.
After successful Wi-Fi connection, the
Wi-Fi light indicator on the top panel will
stop pulsing and turn solid. Once you set
up this product on your Wi-Fi network,
you can control it from any smartphone
or tablet on the same network.
Wi-Fi network used by iPhone should be
switched temporarily to Play-Fi device AP and
restart Philips Sound APP to complete the
product’s Wi-Fi setup. See the steps below:
x Select the Play-Fi
device in the Wi-Fi set
up
x Return to Philips
Sound App to
continue the set up.
8
AirPlay setup
1
2
3
4
Note
WPS mode
1
2
3
Note
Use AirPlay to set up the Wi-Fi connection of iOS
device (iOS7 or later) and soundbar.
After connection, this product may
perform a software update.
Upgrade to the latest software when it is
your rst time set up. The software
upgrade may take several minutes. Do not
unplug your speaker, turn o your device,
or leave the network during the update.
After connection, you can change the
device name. There are several names to
choose from or create your own by
choosing Custom Name at the end of the
name list. Otherwise, it follows the default
name.
Launch the Philips Sound App powered by
DTS Play-Fi. Follow the instructions in the
App to connect this product to your Wi-Fi
network.
After successful Wi-Fi connection, the
Wi-Fi light indicator on the front cabinet
will stop pulsing and turn solid.
Once you set up this product on your
Wi-Fi network, you can control it from
any smartphone or tablet on the same
network.
When using the APP to play music, the
display panel will show PLAY-FI.
iOS device: Settings > Wi-Fi > select home
network [Play-Fi Device (xxxxxx)].
Follow the instruction in Philips Sound
App powered by DTS Play-Fi to start
the pairing.
Press the WPS button
on your router.
The button is normally
marked with this WPS
logo.
Press and hold the Wi-Fi button for 4
seconds. You will hear a tone and the
Wi-Fi light will begin in double blink.
If your router has Wi-Fi Protected Setup
(WPS), you can set up the connection without
entering a password.
x WPS is not a standard feature on all routers. If your
router does not have WPS then use Standard Wi-Fi
Setup.
x Press the (Wi-Fi) button once if you want to exit
the WPS mode or it will automatically exit after 2
minutes.
x After connection, the product may perform a
software update. Upgrade is required after initial set
up. Without the upgrade, not all product features can
be available.
x When the first time setup is not successful, hold
down the Wi-Fi button on the speaker for 8 seconds,
until you hear the second tone and the Wi-Fi light is
changed to slow pulse. Reset the Wi-Fi connection,
restart the app and start the setup again.
x If you want to change from one network to another,
you need to set up the connection again. Press hold
down the (Wi-Fi) Wi-Fi button on the speaker for
8 seconds to reset the Wi-Fi connection.
9
Pairing with Ambilight TV
You can set the built-in LED light of the
speaker to follow the color of your Philips
Ambilight TV. Alternatively, you can set the
light to show a preset color style or you can
switch the light o.
Press the button repeatedly on the
speaker to switch the light mode: 1. Work
with Amblight, 2. Mood Light, 3. O.
Follow Music
1
2
3
4
5
6
Region/Year 2019 Series 2020 Series
OLED984/OLED934
OLED854/OLED804
8804/8204
7504/7394/7354/
7334/7304
OLED935
OLED865/OLED855/
OLED805
9435/9235/9005
8555/8545/
8535/8505
OLED984
OLED804
7374
OLED935
OLED805
8265/8215
5 Lighting
operation
x The pairing will time out after 2 minutes.
Europe
Asia Pacic
Note
Set up your speakers to follow the colors of
the Ambilight TV. The speaker will expand
the Ambilight eect from TV screen.
The speaker can work with the following
Philips Ambilight TV series:
Before starting the setup, make sure the
speaker and TV are connected to the
same Wi-Fi network.
Turn on the Phillips Ambilight TV. The
setup of Ambilight TV pairing is to be
done on the TV.
Activate the conguration as shown on
the Ambilight TV:
Settings > Ambilight > Ambilight
extension > Ambilight+Philips Wireless
Home Speakers > Congure.
Follow the set up instruction on the TV.
It will guide you to long press button
on the speaker to enter the pairing mode
with Ambilight TV.
When the speaker opens for pairing, the
LEDs blink in yellow.
When the speaker is paired with
Ambilight TV, the LED light on speaker
will followed the Ambilight TV.
If there is no Ambilight TV linked or TV is
disconnected, the LED light on speaker will
automatically switch to Follow Music during
music playback.
You can select one of the styles that follow
the dynamics of the sound.
10
Table des matières
Autres manuels Philips Intervenants
Philips
Philips DCM580 Manuel utilisateur
Philips
Philips DS9/37 Manuel utilisateur
Philips
Philips DS3880W/93 Manuel utilisateur
Philips
Philips SB7260/37 Manuel utilisateur
Philips
Philips BM5 Manuel utilisateur
Philips
Philips SPA3350/93 Manuel utilisateur
Philips
Philips HU2000 Series Manuel utilisateur
Philips
Philips SPA1260/37 Manuel utilisateur
Philips
Philips HTS7140 Manuel utilisateur
Philips
Philips HTS3365 Manuel utilisateur
Philips
Philips 22 RH 544 Manuel utilisateur
Philips
Philips SPA1330 Manuel utilisateur
Philips
Philips FB 602 Manuel utilisateur
Philips
Philips HTD3500 Manuel d'instructions
Philips
Philips SB365 Fiche d'information produit
Philips
Philips BTS3000G/10 Manuel utilisateur
Philips
Philips SPA9100B Manuel utilisateur
Philips
Philips SPA5220B Manuel utilisateur
Philips
Philips SB3300 Manuel utilisateur
Philips
Philips htl1193b Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur