Philips BT6000A/94 Manuel utilisateur

www.philips.com/support

User manual

Always there to help you

BT6000

Question?

Contact

Philips

1EN

Contents

1 Important 2

2 Your Bluetooth speaker 3

Introduction 3

What's in the box 3

Overview of the speaker 4

3 Get started 5

Power supply 5

Turn on/off 6

Adjust volume 6

4 Use Bluetooth devices 7

Connect a device 7

Play from Bluetooth device 8

Control your phone call 8

Disconnect a device 8

Reconnect a device 8

5 Listen to an external device 9

6 Product information 10

Specications 10

7 Troubleshooting 11

General 11

About Bluetooth device 11

8 Notice 12

Care of the environment 12

Trademark notice 12

2EN

1 Important

Warning

• Never remove the casing of this speaker.

• Never place this speaker on other electrical equipment.

• Keep this speaker away from direct sunlight, naked

amesorheat.

• Make sure that you always have easy access to the

power cord, plug, or adaptor to disconnect the speaker

from the power.

• Make sure that there is enough free space

around the speaker for ventilation.

• After use under humid circumstance,

immediately clean the product with a soft

dry cloth.

• The battery shall not be exposed to

excessiveheatsuchassunshine,reorthe

like.

• The adapter shall not be exposed to

dripping or splashing.

• Noobjectslledwithliquidsshallbe

placed on the adapter.

• Use only power supplies listed in the user

manual.

• Where the plug of the Direct Plug-in

Adapter is used as the disconnect device,

the disconnect device shall remain readily

operable.

3EN

2 Your Bluetooth

speaker

Congratulations on your purchase, and

welcometoPhilips!Tofullybenetfromthe

support that Philips offers, register your product

at www.philips.com/welcome.

Introduction

This speaker has passed splash-proof test

(IPX4) and can be used near water.

With this speaker, you can enjoy audio from

Bluetooth-enabled devices or other external

devices.

What's in the box

Check and identify the contents of your

package:

• Speaker

• USB cable for charging

• Power adapter

• Short user manual

4EN

Overview of the speaker

a PAIRING

• Enter Bluetooth pairing mode.

• Disconnect Bluetooth connection.

• Answer or reject an incoming call.

• End the current phone call.

• Transfer the call to your mobile device.

b NFC

• Connect a NFC compatible device

through Bluetooth.

• Charge the built-in battery.

d AUDIO IN

• Connect an external audio device.

e Volume knob ( )

• Adjust volume.

• Turn the speaker on or off.

5EN

3 Get started

Always follow the instructions in this chapter in

sequence.

Power supply

Either AC power or battery can be used as

power supply of this product.

Option 1: Battery power

The speaker can operate on the built-in

rechargeable battery.

Note

• Rechargeable battery has a limited number of charge

cycles. Battery life and number of charge cycles vary by

use and settings.

• It takes approximately three hours to fully charge the

battery.

• TheredLEDindicatorasheswhenthebatteryislow.

To recharge the built-in battery:

• Connect the speaker to AC power supply;

• Connect the USB cable between

• the socket on the speaker, and

• a USB socket on a computer.

LED indicator Battery status

Solid red Under charging

Off Fully charged

Option 2:AC power

Caution

• Risk of product damage! Make sure that the power

voltage corresponds to the voltage printed on the back

or underside of the speaker.

• Risk of electric shock! When you unplug the AC adapter,

always pull the plug from the socket. Never pull the cord.

6EN

• Connect the adapter to:

• the socket on the speaker.

• the power outlet.

Turn on/off

• To turn the speaker on or off, rotate the

knob clockwise or anticlockwise until you

hear a click.

» When the speaker is turned on, the

blueLEDindicatorashes.

» When the speaker is turned off, the

blue LED indicator lights off, and the

and the icons are towards the same

direction.

OFF

Note

• Ifthebatterylevelislow,theredLEDindicatorashes.

Switch to standby mode

• The speaker switches to standby mode in

the following situations:

• The connection with Bluetooth

device or other device is invalid for 15

minutes; or

• Music playback is stopped for 15

minutes.

Adjust volume

• During play, rotate the knob to increase or

decrease volume.

7EN

4 Use Bluetooth

devices

With this speaker, you can listen to audio from

Bluetooth-enabled devices and control the

incoming call through Bluetooth.

Connect a device

Note

• The speaker can memorize a maximum of four paired

devices.Thefthpaireddevicewillreplacetherstone.

• Make sure that Bluetooth function is enabled on your

device, and your device is set as visible to all other

Bluetooth devices.

• Any obstacle between this speaker and a Bluetooth

device can reduce the operational range.

• Keep away from any other electronic device that may

cause interference.

• Make sure that no audio input cable is connected to

the AUDIO IN socket.

Option 1: Connect a device through

NFC

Near Field Communication (NFC) is a

technology that enables short-range wireless

communication between various NFC

compatible devices, such as mobile phones and

IC tags.

If your Bluetooth device supports NFC, you can

connect it with this speaker easily.

1 Enable NFC on your Bluetooth device

(refer to its user manual).

2 Turn on the speaker.

» TheblueLEDindicatorashes.

3 Tap the NFC tag on the top of the speaker

with the NFC area of your Bluetooth

device.

4 Follow the on-screen instructions to

complete the pairing and connection.

» After successful connection, the

speaker beeps twice, and the LED

indicator turns solid blue.

Option 2: Connect a device manually

Note

• The operational range between this speaker and a

Bluetooth device is approximately 10 meters (30 feet).

1 On your Bluetooth device, enable

Bluetooth and search for Bluetooth devices

that can be paired (see the user manual of

the device).

2 Turn on the speaker.

» TheblueLEDindicatorashes.

8EN

3 Select [Philips BT6000] displayed on your

device for pairing. If necessary, input “0000”

as the pairing password.

» After successful connection, the

speaker beeps twice, and the LED

indicator turns solid blue.

• Ifyoufailtond[Philips BT6000] on

your device for pairing, press and hold

PAIRING until you hear beep sound,

and then try again.

LED indicator Description

Flashing blue Connecting;

Waiting for pairing

Solid blue Connected

Play from Bluetooth device

Note

• If there is an incoming call on the connected mobile

phone, music play pauses.

After successful Bluetooth connection, play

audio on the Bluetooth device.

» Audio streams from your Bluetooth

device to the speaker.

Control your phone call

After Bluetooth connection, you can control an

incoming call with this speaker.

Button Function

Press to answer an incoming call.

Press and hold for three seconds to

reject an incoming call.

During a call, press to end the current

call.

During a call, press and hold for three

seconds to transfer the call to your

mobile device.

Disconnect a device

• Press and hold PAIRING for three seconds

when there is no incoming call;

• Disable Bluetooth on your device; or

• Move the device beyond the

communication range.

» The speaker beeps twice, and the blue

LEDindicatorashes.

Note

• Before connecting another Bluetooth device, disconnect

thecurrentdevicerst.

Reconnect a device

When you turn on the speaker, it will reconnect

the last connected device automatically; If not,

select [Philips BT6000] on your Bluetooth

device to start connection.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Intervenants

Philips

Philips SBCBA300 Manuel utilisateur

Philips

Philips SPA4355/12 Manuel utilisateur

Philips

Philips HTL2100 Manuel utilisateur

Philips

Philips TCP320/00 Manuel utilisateur

Philips

Philips SBT310/37 Manuel utilisateur

Philips

Philips BT3080 Manuel utilisateur

Philips

Philips SPA5220B Manuel utilisateur

Philips

Philips SPA1300/05 Manuel utilisateur

Philips

Philips HTL2193B Manuel utilisateur

Philips

Philips AECS7000E/00 Manuel utilisateur

Philips

Philips P9SLV/37 Manuel utilisateur

Philips

Philips HTL3120 Manuel utilisateur

Philips

Philips SPA7380/77 Manuel utilisateur

Philips

Philips SPA4310/10 Manuel utilisateur

Philips

Philips HTL4111B/12 Manuel utilisateur

Philips

Philips HTL2110 Manuel utilisateur

Philips

Philips S7807 Manuel utilisateur

Philips

Philips SPA5190B Manuel utilisateur

Philips

Philips TANX20 Manuel utilisateur

Philips

Philips BT6000 Manuel utilisateur

Philips

Philips TAS2505B/94 Manuel utilisateur

Philips

Philips HTL2163B Manuel utilisateur

Philips

Philips PS402 Manuel utilisateur

Philips

Philips 4000 series Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur