Philips BT6000 Manuel utilisateur

BT6000

www.philips.com/support

User manual

Portable speaker

1EN

Contents

1 Important 2

2 Your Bluetooth speaker 2

Introduction 2

What's in the box 3

Overview of the speaker 3

3 Get started 4

Power supply 4

Turn on/o 4

Adjust volume 5

4 Use Bluetooth devices 5

Connect a device 5

Play from Bluetooth device 6

Control your phone call 6

Disconnect a device 7

Reconnect a device 7

5 Listen to an external device 8

6 Specications 8

7 Troubleshooting 9

General 9

About Bluetooth device 10

8 Notice 10

Compliance 10

Care of the environment 10

Trademark notice 11

2EN

1 Important

Warning

•Never remove the casing of this speaker.

•Never place this speaker on other electrical

equipment.

•Keep this speaker away from direct

sunlight, naked ames or heat.

•Make sure that you always have easy

access to the power cord, plug, or adaptor

to disconnect the speaker from the power.

• Make sure that there is enough

free space around the speaker for

ventilation.

• After use under humid

circumstance, immediately clean

the product with a soft dry cloth.

• The battery shall not be exposed

to excessive heat such as sunshine,

re or the like.

• The adapter shall not be exposed

to dripping or splashing.

• No objects lled with liquids shall

be placed on the adapter.

• Do not place any sources of

danger on the speaker (e.g. lighted

candles).

• Use only power supplies listed in

the user manual.

• Where the plug of the Direct Plug-in

Adapter is used as the disconnect

device, the disconnect device shall

remain readily operable.

Note

• The type plate is located on the bottom

of the speaker.

2 Your

Bluetooth

speaker

Congratulations on your purchase,

and welcome to Philips! To fully

benet from the support that Philips

oers, register your product at

www.philips.com/welcome.

Introduction

This speaker has passed splash-proof

test (IPX4) and can be used near water.

With this speaker, you can enjoy audio

from Bluetooth-enabled devices or

other external devices.

3EN

What's in the box

Check and identify the contents of your

package:

• Speaker

• USB cable for charging

• USB adapter

• Printed materials

Quick Start Guide

Overview of the speaker

3 4

2 1

a /PAIRING

• Enter Bluetooth pairing mode.

• After Bluetooth connection,

respond to an incoming call.

• Clear Bluetooth pairing

information.

b NFC

• Connect a NFC compatible

device through Bluetooth.

• Charge the built-in battery.

d AUDIO IN

• Connect an external audio

device.

e Volume knob ( )

• Turn the speaker on or o.

• Adjust volume.

3 Get started

Always follow the instructions in this

chapter in sequence.

Power supply

Either AC power or the built-in battery

can be used as power supply of this

product.

Option 1: AC power

Caution

•Risk of product damage! Make sure that the

power voltage corresponds to the voltage

printed on the back or underside of the

speaker.

•Risk of electric shock! When you unplug the

AC adapter, always pull the plug from the

socket. Never pull the cord.

Connect the adapter to:

• the socket on the speaker.

• the power outlet.

Option 2: Battery power

The speaker can also operate on the

built-in rechargeable battery.

Note

•Rechargeable battery has a limited number

of charge cycles. Battery life and number of

charge cycles vary by use and settings.

•It takes approximately three hours to fully

charge the battery.

•The red LED indicator ashes when the

battery is low.

To recharge the built-in battery:

• Connect the speaker to AC power.

Battery indicator Battery status

Solid red Under charging

O Fully charged

Turn on/o

OFF

To turn the speaker on or o, rotate the

knob clockwise or anticlockwise until

you hear a click.

» When the speaker is turned on, the

blue LED indicator ashes.

» When the speaker is turned o, the

blue LED indicator lights o.

Note

•If the battery level is low, the red LED

indicator ashes.

•The speaker turns o automatically when

being idle for 15 minutes.

Adjust volume

During music playback, rotate the knob

to increase or decrease volume.

4 Use

Bluetooth

devices

With this speaker, you can listen to

audio from Bluetooth-enabled devices

and control the incoming call through

Bluetooth.

Connect a device

Note

•Make sure that Bluetooth function is

enabled on your device, and your device is

set as visible to all other Bluetooth devices.

•Any obstacle between this speaker

and a Bluetooth device can reduce the

operational range.

•Keep away from any other electronic

device that may cause interference.

•The operational range between this

speaker and a Bluetooth device is

approximately 10 meters (30 feet).

Option 1: Connect a device

through NFC

Near Field Communication (NFC) is a

technology that enables short-range

wireless communication between

various NFC compatible devices, such

as mobile phones and IC tags.

If your Bluetooth device supports NFC,

you can connect it with this speaker

easily.

1 Enable NFC on your Bluetooth

device (refer to its user manual).

2 Turn on the speaker.

» The blue LED indicator ashes.

3 Tap the NFC tag on the top of the

speaker with the NFC area of your

Bluetooth device.

4 Follow the on-screen instructions

to complete the pairing and

connection.

» After successful connection, the

speaker beeps twice, and the

LED indicator turns solid blue.

Option 2: Connect a device

manually

1 On your Bluetooth device, enable

Bluetooth and search for Bluetooth

devices that can be paired (see the

user manual of the device).

2 Turn on the speaker.

» The blue LED indicator ashes.

3 Select [Philips BT6000] displayed

on your device for pairing. If

necessary, input “0000” as the

pairing password.

» After successful connection, the

speaker beeps twice, and the

LED indicator turns solid blue.

• If you fail to nd [Philips

BT6000] on your device

for pairing, press and hold

/PAIRING for three seconds

until you hear beep sound, and

then try again.

LED indicator

(blue)

Description

Flashing quickly Ready for pairing

Flashing slowly Connecting

the previously

connected device

Solid blue Connected

Play from Bluetooth

device

Note

•Music play pauses when there is an

incoming call, and resumes when your

phone call ends.

After successful Bluetooth connection,

play audio on the Bluetooth device.

» Audio streams from your Bluetooth

device to the speaker.

Control your phone call

After Bluetooth connection, you can

control an incoming call with this

speaker.

Button Function

/PAIRING Press to answer an

incoming call.

Press and hold for three

seconds to reject an

incoming call.

During a call, press to end

the current call.

During a call, press and

hold for three seconds to

transfer the call to your

mobile device.

Disconnect a device

• Press and hold /PAIRING for three

seconds when there is no incoming

call;

• Disable Bluetooth on your device;

• Move the device beyond the

communication range.

» The speaker beeps, and the blue

LED indicator ashes.

Note

•Before connecting another Bluetooth

device, disconnect the current device rst.

Reconnect a device

• When you turn on the speaker,

it tries to reconnect the last

connected device automatically;

• If not successful, select [Philips

BT6000] on your Bluetooth menu

to start reconnection.

Clear pairing information

Press and hold /PAIRING for 8 seconds.

5 Listen to

an external

device

With this speaker, you can also listen

to an external audio device such as an

MP3 player.

Note

•Make sure that music playback through

Bluetooth is stopped.

1 Open the protective cover on the

left of the speaker.

2 Connect an audio input cable (not

supplied) with a 3.5 mm connector

on both ends to

• the AUDIO IN socket on this

speaker, and

• the headphone socket on the

external device.

3 Play audio on the external device

(refer to its user manual).

Tip

•When you start music streaming from

a connected Bluetooth device, the

speaker switches to the Bluetooth source

automatically.

6 Specications

Note

•Product information is subject to change

without prior notice.

Rated output

power

(Amplier)

12W RMS

Acoustic

frequency

response

100-20000 Hz

Speaker driver 2 x 1.5” full range, 8 Ω

Bass

enhancement

2 x passive radiator

Bluetooth

version

V4.0

Bluetooth

supported

proles

HFP V1.5, A2DP V1.2,

AVRCP V1.4

Bluetooth

frequency band

/ Output power

2.400GHz ~

2.483GHz ISM Band /

≤4dBm (Class 2)

AUX input level 650mV RMS

Water

resistance

IPX4

Power Supply

- AC Power

(power

adapter)

Brand name:

PHILIPS;

Model: AKN2G-

0500200VU;

Input: 100-240 V~,

50/60 Hz, 0.35 A;

Output: 5 V 2 A;

- Built-in

battery

Li-ion battery

(3.7 V, 4400 mAh)

Play time in

battery mode

Approx. 8 hours

Standby Power

Consumption

< 1 W

Autres manuels pour BT6000

Table des matières

Autres manuels Philips Intervenants

Philips

Philips HTL2100 Manuel utilisateur

Philips

Philips SBCBS010/00 Manuel utilisateur

Philips

Philips DS8530 Manuel utilisateur

Philips

Philips CSP410 Manuel utilisateur

Philips

Philips PB400 Manuel utilisateur

Philips

Philips AD7000W/37 Manuel utilisateur

Philips

Philips HTL5160B Manuel utilisateur

Philips

Philips HTL2193B Manuel utilisateur

Philips

Philips JS50 Manuel utilisateur

Philips

Philips HTL5110 Manuel utilisateur

Philips

Philips HTL1100 Manuel utilisateur

Philips

Philips SPA4355/12 Manuel utilisateur

Philips

Philips MMS222/00 Manuel utilisateur

Philips

Philips 1000 Series Manuel utilisateur

Philips

Philips NTX400X Manuel utilisateur

Philips

Philips Fidelio XS1 Manuel utilisateur

Philips

Philips SPA3250 Manuel utilisateur

Philips

Philips HTL2100 Manuel utilisateur

Philips

Philips SBCBC280/00 Manuel utilisateur

Philips

Philips SBCBA110/BL Manuel utilisateur

Philips

Philips HTL5120 Manuel utilisateur

Philips

Philips SPA7380 Manuel utilisateur

Philips

Philips FB 698 Manuel utilisateur

Philips

Philips DTM9030 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur