Philips 6000 Series Manuel utilisateur

User manual

www.philips.com/welcome

TAPB603

6000 series

Contents

1 Important 3

Help and support 3

Safety 3

Care for your product 4

Care of the environment 4

Caution FCC and IC statement for

Users (USA and Canada only) 5

Compliance 5

2 Your Soundbar 6

Main unit 6

Wireless subwoofer 6

Remote control 6

Connectors 7

Prepare the Remote Control 8

Placement 8

3 Connect 9

Dolby Atmos® 9

Connect to HDMI (ARC) Socket 9

Connect to Optical Socket 10

Connect to AUX Socket 10

Connect to Power 10

Pair up with the subwoofer 11

4 Use your Soundbar 12

Turn ON and OFF 12

Auto Standby 12

Select Modes 12

Adjust the Volume 12

Select Equalizer (EQ) Effect 12

Adjust the Bass/Treble Level 12

Dolby sound mode 13

Set display brightness 13

Bluetooth Operation 13

AUX / OPTICAL / HDMI Operation 14

USB Operation 14

5 Wall mount 15

 3URGXFWVSHFLÀFDWLRQV 16

7 Troubleshooting 17

English

1 Important

Read and understand all instructions before you

use your product. If damage is caused by failure

to follow instructions, the warranty does not

apply.

Help and support

For extensive online support, visit

www.philips.com/welcome to:

• download the user manual and the quick

start guide

• watch video tutorials (available only for

selected models)

• ÀQGDQVZHUVWRIUHTXHQWO\DQVZHUHG

questions (FAQs)

• email us a question

• chat with our support representative.

Follow the instructions on the website to select

your language, and then enter your product

model number.

Alternatively, you can contact Consumer Care

in your country. Before you contact, note down

the model number and serial number of your

SURGXFW<RXFDQÀQGWKLVLQIRUPDWLRQRQWKH

back or bottom of your product.

Safety

5LVNRIHOHFWULFVKRFNRUÀUH

• Before you make or change any

connections, make sure that all devices are

disconnected from the power outlet.

• Never expose the product and accessories

to rain or water. Never place liquid

containers, such as vases, near the product.

If liquids are spilt on or into the product,

disconnect it from the power outlet

immediately. Contact Consumer Care to

have the product checked before use.

• Never place the product and accessories

QHDUQDNHGÁDPHVRURWKHUKHDWVRXUFHV

including direct sunlight.

• Never insert objects into the ventilation

slots or other openings on the product.

• Where the mains plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain readily

operable.

• Battery (battery pack or batteries installed)

shall not be exposed to excessive heat

VXFKDVVXQVKLQHÀUHRUWKHOLNH

• Disconnect the product from the power

outlet before lightning storms.

• When you disconnect the power cord,

always pull the plug, never the cable.

5LVNRIVKRUWFLUFXLWRUÀUH

• )RULGHQWLÀFDWLRQDQGVXSSO\UDWLQJVVHH

the type plate at the back or bottom of

the product.

• Before you connect the product to the

power outlet, ensure that the power

voltage matches the value printed on the

back or bottom of the product. Never

connect the product to the power outlet if

the voltage is different.

5LVNRILQMXU\RUGDPDJHWRWKLVSURGXFW

• For wall mounting, this product must be

securely attached to the wall in accordance

with the installation instructions. Use

only the supplied wall mount bracket (if

available). Improper wall mounting may

result in accident, injury or damage. If you

have any query, contact Consumer Care in

your country.

• Never place the product or any objects

on power cords or on other electrical

equipment.

• If the product is transported in

temperatures below 5°C, unpack the

product and wait until its temperature

matches room temperature before

connecting it to the power outlet.

• Parts of this product can be made of

glass. Handle with care to avoid injury and

damage.

5LVNRIRYHUKHDWLQJ

• 1HYHULQVWDOOWKLVSURGXFWLQDFRQÀQHG

space. Always leave a space of at least four

inches around the product for ventilation.

Ensure curtains or other objects never

cover the ventilation slots on the product.

5LVNRIFRQWDPLQDWLRQ

• Do not mix batteries (old and new or

carbon and alkaine, etc.).

• CAUTION: Danger of explosion if

batteries are incorrectly replaced. Replace

only with the same or equivalent type.

• Remove batteries if they are exhausted or

if the remote control is not to be used for

a long time.

• Batteries contain chemical substances, they

should be disposed of properly.

5LVNRIVZDOORZLQJEDWWHULHV

• The product/remote control may contain

a coin/button type battery, which can be

swallowed. Keep the battery out of reach

of children at all times! If swallowed, the

battery can cause serious injury or death.

Severe internal burns can occur within two

hours of ingestion.

• If you suspect that a battery has been

swallowed or placed inside any part of the

body, seek immediate medical attention.

• When you change the batteries, always

keep all new and used batteries out of

reach of children. Ensure that the battery

compartment is completely secure after

you replace the battery.

• If the battery compartment cannot be

completely secured, discontinue use of the

product. Keep out of reach of children and

contact the manufacturer.

This is CLASS II apparatus with double

insulation, and no protective earth provided.

Care for your product

8VHRQO\PLFURÀEHUFORWKWRFOHDQWKHSURGXFW

Care of the environment

Disposal of your old product and battery

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

This symbol on a product means that the

product is covered by European Directive

2012/19/EU.

This symbol means that the product contains

batteries covered by European Directive

2013/56/EU which cannot be disposed of with

normal household waste.

Inform yourself about the local separate

collection system for electrical and electronic

products and batteries. Follow local rules and

never dispose of the product and batteries

with normal household waste. Correct disposal

of old products and batteries helps prevent

negative consequences for the environment and

human health.

Removing the disposable batteries

To remove the disposable batteries, see battery

installation section.

English

Caution FCC and IC

statement for Users (USA

and Canada only)

FCC INFORMATION

Warning:

• This equipment should be installed and

operated with minimum distance 20cm

between the radiator & your body.

• &KDQJHVRUPRGLÀFDWLRQVWRWKLVXQLWQRW

expressly approved by the party responsible

for compliance could void the user’s authority

to operate the equipment. ”

NOTE: This equipment has been tested

and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of

the FCC Rules.These limits are designed to

provide reasonable protection against harmful

interference in a residential installation.This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used

in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can be

determined by turning the equipment off and

on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

• Reorient or relocate the receiving

antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet

on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced

radio / TV technician for help.

This device contains licence-exempt

transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development

Canada’s licence-exempt RSS(s). Operation is

subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference,

including interference that may cause

undesired operation of the device.

Compliance

This product complies with the radio

interference requirements of the European

Community.

Hereby, MMD Hong Kong Holding Limited

declares that this product is in compliance

with the essential requirements and other

relevant provisions of Directive 2014/53/EU.

<RXFDQÀQGWKH'HFODUDWLRQRI&RQIRUPLW\RQ

www.p4c.philips.com.

2 Your Soundbar

Congratulations on your purchase, and

ZHOFRPHWR3KLOLSV7RIXOO\EHQHÀWIURP

the support that Philips offers, register your

Soundbar at www.philips.com/welcome.

Main unit

This section includes an overview of the main

unit.

AUX

a (Standby-On)

Switch the Soundbar On or to standby.

b (Source)

Select an input source for the Soundbar.

c - (Volume)

Decrease the volume.

d + (Volume)

Increase the volume.

e Remote Control Sensor

f Display panel

Wireless subwoofer

This section includes an overview of the

Wireless subwoofer.

abc

a AC~ Socket

Connect to the power supply.

b PAIR button

Press to to enter the pairing mode for the

subwoofer.

c Subwoofer indicator

• When the power is turned on, the

indicator lights up.

• During wireless pairing between the

subwoofer and the main unit, the

indicator blinks orange quickly.

• When the pairing succeeds, the

indicator lights up orange.

• When the pairing fails, the indicator

blinks orange slowly.

Remote control

This section includes an overview of the

remote control.

a (Standby-On)

Switch the Soundbar on or to standby.

b Source

Select an input source for the Soundbar.

English

c / (Previous/Next)

Skip to the previous or next track in USB/

BT mode.

d /Pair (Play/Pause)

Start, pause or resume play in USB/BT

mode.

Press and hold to activate the pairing

function in Bluetooth mode or disconnect

the existing paired Bluetooth device.

e +/- (Volume)

Increase or decrease volume.

f Mute

Mute or restore volume.

g Dimmer

Set the brightness of SoundBar display

panel.

h (Dolby)

Turn the Dolby ON/OFF.

i EQ

Select Equalizer (EQ) effect.

j Bass

Activate bass setup.

k Treble

Activate treble setup.

Connectors

This section includes an overview of the

connectors available on your Soundbar.

OPTICALUSB AUX

AC~

HDMIOUT(ARC)HDMI 1HDMI2

OPTICAL USB AUX

AC~

HDMI OUT (ARC)HDMI 1HDMI 2

e fba cd

a AC~

Connect to the power supply.

b OPTICAL

Connect to an optical audio output on the

TV or a digital device.

c USB

• Audio input from a USB storage

device.

• Upgrade software of this product.

d AUX

Audio input from, for example, an

MP3 player (3.5mm jack).

e HDMI OUT (ARC)

Connect to the HDMI input on the TV.

f HDMI 1/ HDMI 2

Connect to the HDMI input on the TV.

g Wall bracket slot

Prepare the Remote Control

• The provided Remote Control allows the

unit to be operated from a distance.

• Even if the Remote Control is operated

within the effective range 19.7 feet

(6m), remote control operation may

be impossible if there are any obstacles

between the unit and the remote control.

• If the Remote Control is operated near

other products which generate infrared

rays, or if other remote control devices

using infra-red rays are used near the unit,

it may operate incorrectly. Conversely, the

other products may operate incorrectly.

First-time use:

The unit has a

pre-installed lithium

CR2025 battery.

Remove the protective

tab to activate the

remote control battery.

Replace the Remote Control Battery

• The remote control requires a CR2025, 3V

Lithium battery.

1 Push the tab on the side of the battery

tray towards the tray.

2 Now slide the battery tray out of the

remote control.

3 Remove the old battery. Place a new

CR2025 battery into the battery tray with

the correct polarity (+/-) as indicated.

4 Slide the battery tray back into the slot in

the remote control







Precautions Concerning Batteries

• When the Remote Control is not to be

used for a long time (more than a month),

remove the battery from the Remote

Control to prevent it from leaking.

• If the batteries leak, wipe away the leakage

inside the battery compartment and

replace the batteries with new ones.

• Do not use any batteries other than those

VSHFLÀHG

• Do not heat or disassemble batteries.

• 1HYHUWKURZWKHPLQÀUHRUZDWHU

• Do not carry or store batteries with other

metallic objects. Doing so could cause

batteries to short circuit, leak or explode.

• Never recharge a battery unless it is

FRQÀUPHGWREHDUHFKDUJHDEOHW\SH

Placement

Place the subwoofer at least 1 meter (3 feet)

away from your Soundbar, and ten centimeters

away from the wall.

For best results, place your subwoofer as shown

below.

English

3 Connect

This section helps you connect your Soundbar

to a TV and other devices, and then set it up.

For information about the basic connections of

your Soundbar and accessories, see the quick

start guide.

Note

• )RULGHQWLÀFDWLRQDQGVXSSO\UDWLQJVVHHWKHW\SHSODWH

at the back or bottom of the product.

• Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

Dolby Atmos®

Dolby Atmos gives you amazing experience you

have never heard before by overhead sound,

and all the richness, clarity, and power of Dolby

sound.

For using Dolby Atmos®

Dolby Atmos® is available only in HDMI mode.

For the details of the connection, please refer to

“HDMI Connection”.

1 To use Dolby Atmos®in HDMI 1 /HDMI

2 / HDMI ARC mode, your TV has to

support Dolby Atmos®.

2 Make sure that “No Encoding” is selected

for bitstream in the digital audio output of

the connected external device (e.g. Blu-ray

DVD player,TV etc.).

3 While entering Dolby Atmos / Dolby

Digital / PCM format, the soundbar will

show DOLBY ATMOS / DOLBY AUDIO /

PCM AUDIO.

Note

• The full Dolby Atmos experience is only available when

the Soundbar is connected to the source via a HDMI

2.0 cable.

• The Soundbar will still function when connected via

other methods (such as a Digital Optical cable) but

these are unable to support all of the Dolby features.

Given this, our recommendation is to connect via

HDMI, in order to ensure full Dolby support.

Connect to HDMI (ARC) Socket

Some 4K HDR TVs require the HDMI input

or picture settings to be set for HDR content

reception. For further setup details on HDR

display, please refer to the instruction manual of

your TV.

Option 1:ARC (Audio Return Channel)

Your Soundbar supports HDMI with Audio

Return Channel (ARC). If yourTV is HDMI ARC

compliant, you can hear the TV audio through

your Soundbar by using a single HDMI cable.

OPTICAL USBAUX

AC~

HDMIOUT(ARC)HDMI 1HDMI2

HDMI (ARC)

1 Using a High Speed HDMI cable, connect

the HDMI OUT (ARC)-TO TV connector

on your Soundbar to the HDMI ARC

connector on the TV.

• The HDMI ARC connector on the TV

might be labeled differently. For details,

see the TV user manual.

2 On yourTV, turn on HDMI-CEC operations.

For details, see theTV user manual.

1 Using an optical cable, connect the

OPTICAL connector on your Soundbar to

the OPTICAL OUT connector on the TV

or other device.

• The digital optical connector might be

labeled SPDIF or SPDIF OUT.

Connect to AUX Socket

• Use a 3.5mm to 3.5mm audio cable

(included) to connect the TV’s headphone

socket to the AUX socket on the unit.

OPTICAL USB AUX

AC~

HDMIOUT(ARC)HDMI 1HDMI2

Headphone

AUX

OPTICAL USB AUX

AC~

HDMIOUT(ARC)HDMI 1HDMI2

AUX

AUDIO OUT

• Use a RCA to 3.5mm audio cable (not

included) to connect the TV’s audio output

sockets to the AUX socket on the unit.

Connect to Power

• Before connecting the AC power cord,

ensure you have completed all other

connections.

• 5LVNRISURGXFWGDPDJHEnsure that the

power supply voltage corresponds to

the voltage printed on the back or the

underside of the unit.

Note

• Your TV must support the HDMI-CEC and ARC

function. HDMI-CEC and ARC must be set to On.

• The setting method of HDMI-CEC and ARC may differ

depending on the TV. For details about ARC function,

please refer to your TV owner’s manual.

• Only HDMI 1.4 compatible cables can support the

ARC function.

Option 2: Standard HDMI

If yourTV is not HDMI ARC-compliant, connect

your soundbar to theTV through a standard

HDMI connection.

OPTICAL USB AUX

AC~

HDMIOUT(ARC)HDMI 1HDMI2

HDMI IN

HDMI OUT

HDMI ARCHDMI 1 / HDMI 2

1 Use an HDMI cable (included) to connect

the soundbar’s HDMI OUT socket to the

TV’s HDMI IN socket.

2 Use an HDMI cable (included) to connect

the soundbar’s HDMI IN (1 or 2) socket to

your external devices (e.g. games consoles,

DVD players and blu ray).

Connect to Optical Socket

OPTICAL USB AUX

AC~

HDMIOUT(ARC)HDMI 1HDMI2

OPTICAL OUT

OPTICAL

Autres manuels pour 6000 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Système de haut-parleurs

Philips

Philips MMS430G/00 Manuel utilisateur

Philips

Philips HTL1170B/F7 Manuel utilisateur

Philips

Philips AECS7000 Fiche d'information produit

Philips

Philips 2000 series Manuel utilisateur

Philips

Philips 1000 Series Manuel utilisateur

Philips

Philips CSS2133B/F7 Manuel utilisateur

Philips

Philips amBX SGC6101BD Manuel utilisateur

Philips

Philips HTL3140B Manuel utilisateur

Philips

Philips SoundStage HTL4110B/93 Manuel utilisateur

Philips

Philips HTL2163B Manuel utilisateur

Philips

Philips HTL3320 Manuel utilisateur

Philips

Philips SPA2210 Manuel utilisateur

Philips

Philips HTL3325 Manuel utilisateur

Philips

Philips A2.310/05 Guide de référence

Philips

Philips 7000 series Manuel utilisateur

Philips

Philips HTL2111A Manuel utilisateur

Philips

Philips Fidelio B97 Manuel utilisateur

Philips

Philips NTX400 Fiche d'information produit

Philips

Philips A3.310/05 Guide de référence

Philips

Philips SGC5101BD/27 Manuel utilisateur

Philips

Philips HTL3110B/12 Manuel utilisateur

Philips

Philips HTL2101A/12 Manuel utilisateur

Philips

Philips HTB3520X Manuel utilisateur

Philips

Philips 22 AH 585 Manuel utilisateur

Manuels Système de haut-parleurs populaires d'autres marques

JVC

JVC CA-MXK5R Manuel utilisateur

LG NB4532B Manuel utilisateur

JVC

JVC CA-FSH100 Manuel utilisateur

5Core

5Core Pro Series Manuel utilisateur

EAW

EAW MQV1394e Manuel utilisateur

Lynx

Lynx GXR-LA10A Manuel utilisateur

iLive

iLive ITB066B Manuel utilisateur

RDX

RDX QuickStation 4 Manuel utilisateur

Electro-Voice

Electro-Voice S-122 Manuel utilisateur

Sven

Sven SPS-619 GOLD Manuel utilisateur

Pioneer

Pioneer CS-7070 Manuel utilisateur

EAW

EAW UB82e Manuel utilisateur

Sondpex

Sondpex Active Speaker System and Digital Music... Manuel utilisateur

JVC

JVC NX-PN7 Manuel utilisateur

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuel utilisateur

Yamaha

Yamaha NX-A01 - Speaker Sys Manuel utilisateur

SE Audiotechnik

SE Audiotechnik I-LINE Manuel utilisateur

Gemini

Gemini WRX-843 Series Manuel utilisateur