Philips 8000 Series Manuel utilisateur

TAB8905

8000 series

www.philips.com/support

User manual

Contents

1 Important 3

Help and support 3

Safety 3

Care for your product 4

Care of the environment 4

Compliance 5

Trademarks: 6

What’s in the Box 6

2 Your Soundbar 7

Main unit 7

Connectors 7

Wireless subwoofer 8

Remote control 8

Prepare the Remote Control 9

Placement 9

3 Connect 10

Dolby Atmos® 10

Connect to HDMI (ARC) Socket 10

Connect to Optical Socket 11

Connect to AUX Socket 11

Connect to Power 11

Pair up with the subwoofer 12

Wireless Network Setup 12

4 Use your Soundbar 13

Turn ON and OFF 13

Auto Standby 13

Select Modes 13

Adjust the Volume 13

Dolby sound mode 13

Setup Menu 14

Factory Reset 14

Bluetooth Operation 15

AUX / OPTICAL / HDMI Operation 15

USB Operation 16

Play-Fi Wireless Surround mode 16

5 Wall mount 17

6 Productspecications 18

7 Troubleshooting 19

English

1 Important

Read and understand all instructions before you

use your product. If damage is caused by failure

to follow instructions, the warranty does not

apply.

Help and support

For extensive online support, visit

www.philips.com/support to:

• download the user manual and the quick

start guide

• watch video tutorials (available only for

selected models)

• nd answers to frequently answered

questions (FAQs)

• email us a question

• chat with our support representative.

Follow the instructions on the website to select

your language, and then enter your product

model number.

Alternatively, you can contact Consumer Care

in your country. Before you contact, note down

the model number and serial number of your

product. You can nd this information on the

back or bottom of your product.

Safety

Riskofelectricshockorre!

• Before you make or change any

connections, make sure that all devices are

disconnected from the power outlet.

• Never expose the product and accessories

to rain or water. Never place liquid

containers, such as vases, near the product.

If liquids are spilt on or into the product,

disconnect it from the power outlet

immediately. Contact Consumer Care to

have the product checked before use.

• Never place the product and accessories

near naked ames or other heat sources,

including direct sunlight.

• Never insert objects into the ventilation

slots or other openings on the product.

• Where the mains plug or an appliance

coupler is used as the disconnect device,

the disconnect device shall remain readily

operable.

• Battery (battery pack or batteries installed)

shall not be exposed to excessive heat

such as sunshine, re or the like.

• Disconnect the product from the power

outlet before lightning storms.

• When you disconnect the power cord,

always pull the plug, never the cable.

Riskofshortcircuitorre!

• For identication and supply ratings, see

the type plate at the back or bottom of

the product.

• Before you connect the product to the

power outlet, ensure that the power

voltage matches the value printed on the

back or bottom of the product. Never

connect the product to the power outlet if

the voltage is different.

Riskofinjuryordamagetothisproduct!

• For wall mounting, this product must be

securely attached to the wall in accordance

with the installation instructions. Use

only the supplied wall mount bracket (if

available). Improper wall mounting may

result in accident, injury or damage. If you

have any query, contact Consumer Care in

your country.

• Never place the product or any objects

on power cords or on other electrical

equipment.

• If the product is transported in

temperatures below 5°C, unpack the

product and wait until its temperature

matches room temperature before

connecting it to the power outlet.

• Parts of this product can be made of

glass. Handle with care to avoid injury and

damage.

Riskofoverheating!

• Never install this product in a conned

space. Always leave a space of at least four

inches around the product for ventilation.

Ensure curtains or other objects never

cover the ventilation slots on the product.

Riskofcontamination!

• Do not mix batteries (old and new or

carbon and alkaine, etc.).

• CAUTION: Danger of explosion if

batteries are incorrectly replaced. Replace

only with the same or equivalent type.

• Remove batteries if they are exhausted or

if the remote control is not to be used for

a long time.

• Batteries contain chemical substances, they

should be disposed of properly.

Riskofswallowingbatteries!

• The product/remote control may contain

a coin/button type battery, which can be

swallowed. Keep the battery out of reach

of children at all times! If swallowed, the

battery can cause serious injury or death.

Severe internal burns can occur within two

hours of ingestion.

• If you suspect that a battery has been

swallowed or placed inside any part of the

body, seek immediate medical attention.

• When you change the batteries, always

keep all new and used batteries out of

reach of children. Ensure that the battery

compartment is completely secure after

you replace the battery.

• If the battery compartment cannot be

completely secured, discontinue use of the

product. Keep out of reach of children and

contact the manufacturer.

This is CLASS II apparatus with

double insulation, and no protective

earth provided.

Care for your product

Use only microber cloth to clean the product.

Care of the environment

Disposal of your old product and battery

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

This symbol on a product means that the

product is covered by European Directive

2012/19/EU.

This symbol means that the product contains

batteries covered by European Directive

2013/56/EU which cannot be disposed of with

normal household waste.

Inform yourself about the local separate

collection system for electrical and electronic

products and batteries. Follow local rules and

never dispose of the product and batteries

with normal household waste. Correct disposal

of old products and batteries helps prevent

negative consequences for the environment and

human health.

Removing the disposable batteries

To remove the disposable batteries, see battery

installation section.

For 5G WiFi Device

The device for operation in the band 5150–5350 MHz

is only for indoor use to reduce the potential for harmful

interference to co-channel mobile satellite systems.

English

Caution FCC and IC

statement for Users (USA

and Canada only)

FCC INFORMATION

Warning:

• This equipment should be installed and

operated with minimum distance 20cm

between the radiator & your body.

• Changes or modications to this unit not

expressly approved by the party responsible

for compliance could void the user’s authority

to operate the equipment. ”

NOTE: This equipment has been tested

and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of

the FCC Rules.These limits are designed to

provide reasonable protection against harmful

interference in a residential installation.This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used

in accordance with the instructions, may cause

harmful interference to radio communications.

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can be

determined by turning the equipment off and

on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

• Reorient or relocate the receiving

antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet

on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced

radio / TV technician for help.

This device contains licence-exempt

transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development

Canada’s licence-exempt RSS(s). Operation is

subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference,

including interference that may cause

undesired operation of the device.

Compliance

This product complies with the radio

interference requirements of the European

Community.

Hereby,TP Vision Europe B.V. declares that this

product is in compliance with the essential

requirements and other relevant provisions of

Directive 2014/53/EU.

You can nd the Declaration of Conformity on

www.p4c.philips.com.

What’s in the Box

Check and identify the items in the package:

• Soundbar x 1

• Wireless Subwoofer x 1

• Remote Control x 1

• Power Cord * x 2

• Wall Mount kit x 1

(Wall Brackets x2, Screws x2, Dowels x2)

• Quick Start Guide / Warranty Card /

Safety Sheet x 1

Remote Control

Soundbar

Wireless Subwoofer

Wall Bracket

Gum Cover

Screws (for wall)

Power Cord *

* Power cord quantity and plug type vary by regions.

Quick start guide

Warranty Card

Safety Sheet

2 X

Trademarks:

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS, Inc. (for

companies headquartered in the U.S./Japan/Taiwan)

or under license from DTS Licensing Limited (for all

other companies). DTS, Play-Fi, and the DTS Play-Fi

logo are registered trademarks or trademarks of DTS,

The Wi-Fi CERTIFIED™ Logo is a registered

trademark of Wi-Fi Alliance®.

To control this AirPlay 2–enabled speaker, iOS 11.4

or later is required. Use of the Works with Apple

badge means that an accessory has been designedto

work specically with the technology identied in the

badge and has been certied by the developer to

meet Apple performance standards.

Apple®and AirPlay®are trademarks of Apple Inc.,

registered in the U.S. and other countries.

The Spotify Software is subject to third party licenses

found here:

www.spotify.com/connect/third-party-licenses

Dolby, Dolby Dolby Audio, Dolby Atmos, and the

double-D symbol are registered trademarks of Dolby

Laboratories Licensing Corporation. Manufactured

under license from Dolby Laboratories. Condential

The terms HDMI, HDMI High-Denition Multimedia

Interface, and the HDMI Logo are trademarks

or registered trademarks of HDMI Licensing

Administrator, Inc.

The Bluetooth®word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use

of such marks by MMD Hong Kong Holding Limited is

under license. Other trademarks and trade names are

those of their respective owners.

English

2 Your Soundbar

Congratulations on your purchase, and

welcome to Philips! To fully benet from

the support that Philips offers, register your

Soundbar at www.philips.com/support.

Main unit

This section includes an overview of the main

unit.

cab e

0 0 :0 0

a - (Volume) button

Decrease the volume.

b + (Volume) button

Increase the volume.

c (Play/Pause) button

Start, pause or resume play.

d (Source) button

Select an input source for the Soundbar.

e (Standby-On) button

Switch the Soundbar On or to standby.

f Remote Control Sensor

g Display panel

h Power LED

i Wi-Fi LED indicator (Yellow)

LED State Status

Blink Wi-Fi AP mode

Double blink WPS is active

Constant on Connected / Pairing successful

Connectors

This section includes an overview of the

connectors available on your Soundbar.

efgdabc

a USB

• Audio input from a USB storage device.

• Upgrade software of this product.

b AUX

Audio input from, for example, an

MP3 player (3.5mm jack).

c OPTICAL

Connect to an optical audio output on the

TV or a digital device.

d (Wi-Fi Setup) button

Trigger Wi-Fi setup for Play-Fi.

Press and hold to active the Wps or AP

mode and recongure the network

e HDMI OUT (eARC/ARC)

Connect to the HDMI input on the TV.

f HDMI 1/ HDMI 2

Connect to the HDMI input on the TV.

g AC~

Connect to the power supply.

h Wall bracket slot

Wireless subwoofer

This section includes an overview of the

Wireless subwoofer.

a AC~ Socket

Connect to the power supply.

b Pair button

Press and hold to enter the pairing mode

for the subwoofer.

c Subwoofer indicator

Determine the status based on the

wireless subwoofer indicator.

LED State Status

Fast blink Subwoofer in pairing mode

Constant on Connected / Pairing successful

Slow blink Connection / Pairing Failed

Remote control

This section includes an overview of the

remote control.

a (Standby-On)

Switch the Soundbar on or to standby.

b (Source)

Select an input source for the Soundbar.

c (Dolby)

Turn the Dolby ON/OFF.

d (Mute)

Mute or restore volume.

e (Play/Pause)

Start, pause or resume play in USB/BT mode.

Conrm a selection.

f , , , (Cursors)

• / (Previous/Next)

Skip to the previous or next track.

Navigate Left/Right in menu structure.

• /

Navigate Down/Up in menu structure.

g (MENU)

Enter audio setup.

h ←(Back)

Return to previous menu. Exit menu.

i +/- (Soundbar’s Volume)

Increase / decrease the soundbar’s volume.

j +/- (Subwoofer’s Volume)

Increase / decrease the subwoofer’s volume.

abc

English

Prepare the Remote Control

• The provided Remote Control allows the

unit to be operated from a distance.

• Even if the Remote Control is operated

within the effective range 19.7 feet

(6m), remote control operation may

be impossible if there are any obstacles

between the unit and the remote control.

• If the Remote Control is operated near

other products which generate infrared

rays, or if other remote control devices

using infra-red rays are used near the unit,

it may operate incorrectly. Conversely, the

other products may operate incorrectly.

First-time use:

The unit has a

pre-installed lithium

CR2025 battery.

Remove the protective

tab to activate the

remote control battery.

Replace the Remote Control Battery

The remote control requires a CR2025, 3V

Lithium battery.

1 Use tools (such as coin batteries/coins) to

catch the groove of the battery box cover

and turn counter-clockwise to (unlock).

2 Remove the old battery, which is located in

the lid，place the new CR2025 battery and

pay attention to the correct polarity (+/-).

3 Use the tools to catch the groove of the

battery compartment cover and turn

clockwise to (lock), secure it into the

remote control.

Precautions Concerning Batteries

• When the Remote Control is not to be

used for a long time (more than a month),

remove the battery from the Remote

Control to prevent it from leaking.

• If the batteries leak, wipe away the leakage

inside the battery compartment and

replace the batteries with new ones.

• Do not use any batteries other than those

specied.

• Do not heat or disassemble batteries.

• Never throw them in re or water.

• Do not carry or store batteries with other

metallic objects. Doing so could cause

batteries to short circuit, leak or explode.

• Never recharge a battery unless it is

conrmed to be a rechargeable type.

Placement

Place the subwoofer at least 1 meter (3 feet)

away from your Soundbar, and ten centimeters

away from the wall.

For best results, place your subwoofer as shown

below.

1 2 3

3 Connect

This section helps you connect your Soundbar

to a TV and other devices, and then set it up.

For information about the basic connections of

your Soundbar and accessories, see the quick

start guide.

Note

• For identication and supply ratings, see the type plate

at the back or bottom of the product.

• Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

Dolby Atmos®

Dolby Atmos gives you amazing experience you

have never heard before by overhead sound,

and all the richness, clarity, and power of Dolby

sound.

For using Dolby Atmos®

Dolby Atmos® is available only in HDMI mode.

For the details of the connection, please refer to

“HDMI Connection”.

1 To use Dolby Atmos®in HDMI 1 /HDMI

2 / HDMI ARC mode, your TV has to

support Dolby Atmos®.

2 Make sure that “No Encoding” is selected

for bitstream in the digital audio output of

the connected external device (e.g. Blu-ray

DVD player,TV etc.).

3 While entering Dolby Atmos / Dolby

Digital / PCM format, the soundbar will

show DOLBY ATMOS / DOLBY AUDIO /

PCM AUDIO.

Note

• The full Dolby Atmos experience is only available when

the Soundbar is connected to the source via a HDMI

2.0 cable.

• The Soundbar will still function when connected via

other methods (such as a Digital Optical cable) but

these are unable to support all of the Dolby features.

Given this, our recommendation is to connect via

HDMI, in order to ensure full Dolby support.

Connect to HDMI Socket

Some 4K HDR TVs require the HDMI input

or picture settings to be set for HDR content

reception. For further setup details on HDR

display, please refer to the instruction manual of

your TV.

Option 1: eARC/ARC (Audio Return

Channel)

Your Soundbar supports HDMI with Audio

Return Channel (eARC/ARC). If your TV is

HDMI ARC compliant, you can hear the TV

audio through your Soundbar by using a single

HDMI cable.

HDMI (ARC)

HDMI OUT

(eARC/ARC)

1 On yourTV, turn on HDMI-CEC operations.

For details, see the TV user manual.

• The HDMI ARC connector on the TV

might be labeled differently. For details,

see the TV user manual.

2 Using a High Speed HDMI cable, connect

the HDMI OUT (eARC/ARC)-TO TV

connector on your Soundbar to the HDMI

ARC connector on the TV.

Autres manuels pour 8000 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Système de haut-parleurs

Philips

Philips 1000 Series Manuel utilisateur

Philips

Philips HTS5110 Manuel utilisateur

Philips

Philips HTS7111/12 Manuel utilisateur

Philips

Philips Fidelio B97 Manuel utilisateur

Philips

Philips HTL5140B Manuel utilisateur

Philips

Philips A2.610/00 Guide de référence

Philips

Philips FB 201 Manuel utilisateur

Philips

Philips SPA4355/37 Manuel utilisateur

Philips

Philips Active Speaker System Manuel utilisateur

Philips

Philips AECS7000 Fiche d'information produit

Philips

Philips MMS223/00 Guide de référence

Philips

Philips Essence 5000 Series Manuel utilisateur

Philips

Philips Fidelio DS6800W Manuel utilisateur

Philips

Philips HTL2110/96 Manuel utilisateur

Philips

Philips TAB8507B/10 Manuel utilisateur

Philips

Philips HTB7150K/51 Manuel utilisateur

Philips

Philips FB 208W Manuel utilisateur

Philips

Philips MMS222/00 Guide de référence

Philips

Philips HTL3310/10 Manuel utilisateur

Philips

Philips MMS260/05 Manuel utilisateur

Philips

Philips HTL3140B Manuel utilisateur

Philips

Philips NTX400 Manuel utilisateur

Philips

Philips 7000 series Manuel utilisateur

Philips

Philips HTL1190B/05 Manuel utilisateur

Manuels Système de haut-parleurs populaires d'autres marques

JVC

JVC CA-MXK5R Manuel utilisateur

LG NB4532B Manuel utilisateur

JVC

JVC CA-FSH100 Manuel utilisateur

5Core

5Core Pro Series Manuel utilisateur

EAW

EAW MQV1394e Manuel utilisateur

Lynx

Lynx GXR-LA10A Manuel utilisateur

iLive

iLive ITB066B Manuel utilisateur

RDX

RDX QuickStation 4 Manuel utilisateur

Electro-Voice

Electro-Voice S-122 Manuel utilisateur

Sven

Sven SPS-619 GOLD Manuel utilisateur

Pioneer

Pioneer CS-7070 Manuel utilisateur

EAW

EAW UB82e Manuel utilisateur

Sondpex

Sondpex Active Speaker System and Digital Music... Manuel utilisateur

JVC

JVC NX-PN7 Manuel utilisateur

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuel utilisateur

Yamaha

Yamaha NX-A01 - Speaker Sys Manuel utilisateur

SE Audiotechnik

SE Audiotechnik I-LINE Manuel utilisateur

Gemini

Gemini WRX-843 Series Manuel utilisateur