Philips Srp3014 Manuel utilisateur

www.philips.com/support

User manual

Always there to help you

SRP3014

Question?

Contact

Philips

1EN

Contents

1 Your universal remote 2

Introduction 2

Overview of the universal remote 2

Supported devices 3

2 Get started 4

Insert batteries (not included) 4

Set up the universal remote 4

3 Notice 7

Disposal of your old product and battery 7

4 Service and support 8

Frequently asked questions 8

Need help? 8

2EN

1 Your universal

remote

Congratulations on your purchase, and

welcome to Philips! To fully benet from the

support that Philips offers, register your product

at www.philips.com/welcome

Introduction

With the universal remote, you can operate up

to 4 different devices.

Overview of the universal

remote

a INPUT: select available source inputs

(antenna, cable, etc.).

: power on or off.

: LED indicator

b Device selection buttons

c : subtitle

INFO: displays on-screen channel

information.

STREAM: shortcut to the Netix.

GUIDE: displays the program guide.

: screen format

: play

: fast forward

: rewind

3EN

: pause

: stop

: record

d MENU: menu on or off.

BACK: go back one menu level or exit.

/ / / : scroll the menu up/down/

left/right.

OK: conrm your selection.

e : mute

LAST: return to the previous tuned

channel.

CH+/CH-: go to the next/previous

channel.

VOL: adjust the volume.

f / / / : teletext off/teletext mix/

teletext on/teletext hold

g Digit buttons

I/II: select the audio channel.

-/--: select between one and two-gure

channel numbers.

Note

• The button "STREAM" is pre-programmed as a

shortcut to Netix.

Supported devices

Device

name

Description

TV TV, DTV

BD DVD player/recorder, Blu-ray

player

STB Cable box, satellite receiver, IPTV,

DVR, HDTV decoder and TiVo

STR Streaming devices, Apple TV, Roku,

Sony,WD TV, Netgear

4EN

2 Get started

Insert batteries (not included)

Warning

• Check the battery polarity when inserting in the

battery compartment. Incorrect polarity may damage

the product.

Caution

• Risk of explosion! Keep batteries away from heat,

sunshine or re. Never discard batteries in re.

• Risk of decreased battery life! Never mix different

brands or types of batteries.

Note

• When you replace the batteries, all user settings will

be retained in the memory of the universal remote for

5 minutes.

Set up the universal remote

You must rst set up the universal remote

before operating your devices.

Manual registration

1 Switch on your device.

2 Press and hold the device selection button

(e.g.TV) for 5 seconds until the blue LED

is on.

3 Look up the 5-digit code for your brand

in the code list. Codes are listed by the

device type and brand name.The most

popular code is listed rst.

4 Enter the rst 5-digit code using the digit

buttons.

5EN

5 If the light is off, a valid code is saved.

Otherwise, the light will ash once, and

then remains on for code re-entry.

6 Operate the device with the universal

remote. If your device responds correctly,

it means you have entered the right code.

Otherwise, repeat from step 2, and enter

the second code on the list.

Note

• It is possible sometimes that your device only responds

to some of the buttons. In such case, set up with the

next code in the code list, and try operating your

device again.

• Each device button can be used to set up any device.

E.g. you may setup aTV using the BD device button.

Auto registration

1 Switch on your device.

2 Press and hold the device selection button

(e.g.TV) for 5 seconds until the blue LED

is on.

3 Point at your device with the universal

remote.Then press and release to

start searching the code for your brand.

A different infrared signal is sent every 2

seconds as the universal remote searches,

indicated by a blue ash.

6EN

4 When the device is off, immediately press

and release OK to save the code.The blue

LED indicator will turn off.

5 Operate the device with the universal

remote. If your device responds correctly, it

means you have saved the right code.

Note

• Auto registration can be reversed, by pressing and

releasing once more during the auto registration

process.This is helpful if you missed out the chance to

press OK within 2 seconds. Make sure that the device

is rst powered on again.

• Repeat the same procedures to set up other devices.

• It is possible sometimes that your device only responds

to some of the buttons. In such case, set up with the

next code in the code list, and try operating your

device again.

max. 20

minutes

7EN

3 Notice

Disposal of your old product

and battery

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

This symbol on a product means that the

product is covered by European Directive

2012/19/EU.

This symbol means that the product contains

batteries covered by European Directive

2013/56/EU which cannot be disposed of with

normal household waste.

Inform yourself about the local separate

collection system for electrical and electronic

products and batteries. Follow local rules and

never dispose of the product and batteries

with normal household waste. Correct disposal

of old products and batteries helps prevent

negative consequences for the environment and

human health.

Removing the disposable batteries

To remove the disposable batteries, see section

‘Insert batteries’.

When this logo is attached to a product, it

means a nancial contribution has been paid to

the associated national recovery and recycling

system.

Environmental information

All unnecessary packaging has been omitted.

We have tried to make the packaging easy to

separate into three materials: cardboard (box),

polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Your system consists of materials which can

be recycled and reused if disassembled by

a specialized company. Please observe the

local regulations regarding the disposal of

packaging materials, exhausted batteries and old

equipment.

8EN

4 Service and

support

Frequently asked questions

My universal remote does not work at all.

•Check if you have correctly setup the

device with the right code.

•Check if you have pressed the

corresponding device key for your device.

•Check if the batteries are inserted

properly. If the battery level is low, replace

the batteries.

•Check if your device is powered on.

If several device codes are listed under the

brand of my device, how can I select the

correct device code?

To seek the correct device code, test the codes

one by one.The codes are sorted by popularity,

and the most popular code is listed rst.

My device responds only to some of the

commands.

You have set a code for which only some

commands work properly but some do not.Try

other codes until most keys work properly.

Need help?

We advise you to rst read this user manual

carefully. It helps you set up and use the

universal remote.

If, however, you require extra information or

have additional questions about setup, usage,

warranty, etc of the SRP3014, you can always

When calling our helpline, make sure to have

the SRP3014 at hand when you call, so that our

operators can help you determine whether

SRP3014 is working properly.

You will nd our contact details at the end of

this user manual.

For online support, visit

www.philips.com/support

Autres manuels pour srp3014

Table des matières

Autres manuels Philips Télécommande

Philips

Philips SRU 1018 Manuel utilisateur

Philips

Philips US2-PDVR8 Manuel utilisateur

Philips

Philips SRP5004/53 Manuel utilisateur

Philips

Philips SBCRU865/00 Manuel utilisateur

Philips

Philips SRC3036 Manuel utilisateur

Philips

Philips Elite SRP4219G/07 Manuel utilisateur

Philips

Philips SRP4004/55 Manuel utilisateur

Philips

Philips SRP1103/27 Manuel utilisateur

Philips

Philips SRP4010 Manuel utilisateur

Philips

Philips US2-PM725SK Manuel utilisateur

Philips

Philips Hue Bridge 2.0 Manuel utilisateur

Philips

Philips SBCRU640 Manuel utilisateur

Philips

Philips Prestigo SRU8112 Manuel utilisateur

Philips

Philips MAGNAVOX PR1911B Manuel utilisateur

Philips

Philips SRU5040/55 Manuel utilisateur

Philips

Philips YKF406-001 Manuel utilisateur

Philips

Philips Perfect replacement SRP2003/27 Manuel utilisateur

Philips

Philips PM525S - Phlips 5 Device Universal Remote... Manuel utilisateur

Philips

Philips TSU200099 Manuel utilisateur

Philips

Philips GV-3/1F-RC-M433 Manuel utilisateur

Philips

Philips Pronto TSU9300 Guide de sécurité

Philips

Philips SRU152/10 Manuel utilisateur

Philips

Philips Perfect replacement SRU5108/27 Guide de l'administrateur

Philips

Philips SRP9368D/27 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation

Philips srp3014 Manuel utilisateur

Manuels Télécommande populaires d'autres marques