Philips SRP2018/27 Manuel utilisateur

SRP2018

Always there to help you

www.philips.com/support

User manual

Question?

Contact

Philips

English

EN 1

Contents

1 Your universal remote 2

Introduction 2

Overview of the universal remote 2

Supported devices 3

2 Get started 4

Insert batteries (not included) 4

Set up the universal remote 5

3 Notice 9

Disposal of your old product and battery 9

4 Service and support 10

Frequently asked questions 10

Need help? 10

Contents

2 EN

1 Your universal remote

Congratulations on your purchase, and welcome to Philips!To fully

benet from the support that Philips offers, register your product at

www.philips.com/welcome

Introduction

With the universal remote, you can operate up to 8 different devices.

Overview of the universal remote

a INPUT: select available source inputs (antenna, cable, etc.).

: LED indicator

: power on or off.

b Device selection buttons

English

EN 3

c GUIDE: displays the program guide.

INFO: displays on-screen channel information.

MENU: menu on or off.

BACK: exit from the menu.

OK: conrm your selection.

/ / / : up/down/left/right.

d VOL+/-: adjust the volume.

CH+/CH-: go to the next/previous channel.

: mute

LAST: return to the previous tuned channel.

e : previous page

: stop

: next page

: play

: pause

: rewind

: record

: fast forward

f A/B/C/D: context sensitivity buttons (A - yellow, B - blue, C- red,

D - Green)

g Digit buttons

ENTER: conrm the digit button selection.

(-): select between one and two-gure channel numbers.

Supported devices

Device name Description

TV/TV-2 TV, DTV

CBL/SAT Cable box, satellite receiver, IPTV, DVR, HDTV

decoder and TiVo

BD DVD player/recorder, Blu-ray player

STR Streaming devices, Apple TV, Roku, Sony,WD TV,

Netgear

VCR Video cassette player/ recorder

AUX Auxiliary equipment, media center PC, others

4 EN

2 Get started

Insert batteries (not included)

Warning

• Check the battery polarity when inserting in the battery compartment. Incorrect

polarity may damage the product.

Caution

• Risk of explosion! Keep batteries away from heat, sunshine or re. Never discard

batteries in re.

• Risk of decreased battery life! Never mix different brands or types of batteries.

Note

• When you replace the batteries, all user settings will be retained in the memory of

the universal remote for 5 minutes.

English

EN 5

Set up the universal remote

You must rst set up the universal remote before operating your

devices.

Manual registration

1 Switch on your device.

2 Press and hold the device selection button (e.g.TV) for 5 seconds

until the red LED is on.

3 Look up the 5-digit code for your brand in the code list. Codes

are listed by the device type and brand name.The most popular

code is listed rst.

6 EN

4 Enter the rst 5-digit code using the digit buttons.

5 If the light is off, a valid code is saved. Otherwise, the light will ash

once, and then remains on for code re-entry.

6 Operate the device with the universal remote. If your device

responds correctly, it means you have entered the right code.

Otherwise, repeat from step 2, and enter the second code on the

list.

Note

• It is possible sometimes that your device only responds to some of the buttons. In

such case, set up with the next code in the code list, and try operating your device

again.

• Each device button can be used to set up any device. E.g. you may setup aTV using

the BD device button.

English

EN 7

Auto registration

1 Switch on your device.

2 Press and hold the device selection button (e.g.TV) for 5 seconds

until the red LED is on.

3 Point at your device with the universal remote.Then press and

release to start searching the code for your brand. A different

infrared signal is sent every 2 seconds as the universal remote

searches, indicated by a red ash.

8 EN

4 When the device is off, immediately press and release OK to save

the code.The red LED indicator will turn off.

max. 20

minutes

5 Operate the device with the universal remote. If your device

responds correctly, it means you have saved the right code.

Note

• Auto registration can be reversed, by pressing and releasing once more during the

auto registration process.This is helpful if you missed out the chance to press OK

within 2 seconds. Make sure that the device is rst powered on again.

• Repeat the same procedures to set up other devices.

• It is possible sometimes that your device only responds to some of the buttons. In

such case, set up with the next code in the code list, and try operating your device

again.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Télécommande

Philips

Philips SRP1003WM/17 Manuel utilisateur

Philips

Philips SRP4050 Manuel utilisateur

Philips

Philips Trilingual Front CoverArt PHBIG3 Manuel utilisateur

Philips

Philips KWR164501/01 Manuel utilisateur

Philips

Philips PM435S Manuel utilisateur

Philips

Philips SRP5016 Manuel utilisateur

Philips

Philips KWR101803/01B Manuel utilisateur

Philips

Philips 22AV1106 Manuel utilisateur

Philips

Philips SRP2002/10 Manuel utilisateur

Philips

Philips SBC RU 530 Manuel utilisateur

Philips

Philips SRU4008/27 Manuel utilisateur

Philips

Philips SRU3007/27 Manuel utilisateur

Philips

Philips Perfect replacement SRC2063WM Manuel utilisateur

Philips

Philips Pronto TSU9400 Guide de sécurité

Philips

Philips 7FF2CWO Manuel utilisateur

Philips

Philips Head Hall C13 Manuel utilisateur

Philips

Philips SRU 5130/86 Manuel utilisateur

Philips

Philips SRP4004 Manuel utilisateur

Philips

Philips SRU 5150/87 Manuel utilisateur

Philips

Philips SRU 520/87 Manuel utilisateur

Philips

Philips SRP2024R/27 Manuel utilisateur

Philips

Philips SBCRU1000/05 Manuel utilisateur

Philips

Philips SBCRU120 Manuel utilisateur

Philips

Philips SBCRU422 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation