Philips M1BT Manuel utilisateur

www.philips.com/welcome

User manual

Always there to help you

M1BT

Question?

Contact

Philips

1EN

Contents

1 Important safety instructions 2

Hearing Safety 2

General information 2

2 Your wireless on-ear headset 3

What's in the box 3

Other devices 3

Overview of your wireless on-ear headset 4

3 Get started 5

Charge your headset 5

Pair the headset with your mobile phone 5

4 Use your headset 6

Connect the headset to a Bluetooth

device 6

Manage your calls and music 6

Wear your headset 7

Use with the audio cable 7

5 Technical data 8

6 Notice 9

Declaration of conformity 9

Disposal of your old product and batteries 9

Notice for the European Union 10

Trademarks 10

7 Frequently asked questions 11

2EN

1 Important safety

instructions

Hearing Safety

Danger

•To avoid hearing damage, limit the time you use the

headset at high volume and set the volume to a safe

level.The louder the volume, the shorter the safe

listening time is.

Be sure to observe the following guidelines

when using your headset.

• Listen at reasonable volumes for

reasonable periods of time.

• Be careful not to adjust the volume

continuously upwards as your hearing

adapts.

• Do not turn up the volume so high that

you can’t hear what’s around you.

• You should use caution or temporarily

discontinue use in potentially hazardous

situations.

• Excessive sound pressure from earphones

and headset can cause hearing loss.

• Using the headset with both ears covered

while driving is not recommended and may

be illegal in some areas while driving.

• For your safety, avoid distractions from

musicorphonecallswhileintrafcor

other potentially dangerous environments.

General information

To avoid damage or malfunction:

Caution

•Do not expose the headset to excessive heat.

•Do not drop your headset.

•Headset shall not be exposed to dripping or splashing.

•Do not allow your headset to be submerged in water.

•Do not use any cleaning agents containing alcohol,

ammonia, benzene, or abrasives.

•If cleaning is required use a soft cloth, if necessary

dampened with a minimum amount of water or diluted

mild soap, to clean the product.

•The integrated battery shall not be exposed to

excessiveheatsuchassunshine,reorthelike.

About operating and storage temperatures

and humidity

• Operate or store in a place where

temperature is between -15ºC (5ºF) and

55ºC (131ºF) (up to 90% relative humidity.

• Battery life may be shorter in high or low

temperature conditions.

This Philips appliance complies with all

applicable standards and regulations regarding

exposuretoelectromagneticelds.

3EN

2 Your wireless

on-ear headset

Congratulations on your purchase, and

welcometoPhilips!Tofullybenetfromthe

support that Philips offers, register your product

at www.philips.com/welcome.

With this Philips wireless on-ear headset, you

can:

• enjoy convenient wireless handsfree calls;

• enjoy and control wireless music;

• switch between calls and music;

• enjoy music on non-Bluetooth devices with

an audio cable.

What's in the box

Philips Bluetooth wireless on-ear headset M1BT

USB charging cable (for charging only)

Audio cable

Pouch

Brochure

Quick start guide

Other devices

A mobile phone or device (e.g. notebook, PDA,

Bluetooth adapters, MP3 players etc) which

supports Bluetooth and is compatible to the

headset (see 'Technical data' on page 8).

4EN

Overview of your wireless

on-ear headset

a Audio cable jack

b Charging slot

c Microphone

d Volume/Track control button

e Call/Music button

f LED lights

5EN

3 Get started

Charge your headset

Note

•Beforeyouuseyourheadsetforthersttime,charge

the battery for 5 hours for optimum battery capacity

and lifetime.

•Use only the original USB charging cable to avoid any

damage.

•Finish your call before charging the headset, as

connecting the headset for charging will power the

headset off.

•You can operate the headset normally during charging.

Connect the supplied USB charging cable to:

• the USB connector of the headset and;

• USB power source.

» LED turns white during charging and

turns off when the headset is fully

charged.

Tip

•Normally, a full charge takes 3 hours.

•When your battery is empty, you can carry on listening

music with an audio cable. Make sure the headset is off

(and not in idle mode) before using this audio cable.

Pair the headset with your

mobile phone

Before you use the headset with your mobile

phoneforthersttime,pairitwithamobile

phone. A successful pairing establishes a unique

encrypted link between the headset and mobile

phone.The headset stores the last 8 devices

in the memory. If you try to pair more than 8

devices, the earliest paired device is replaced by

the new one.

1 Make sure that the mobile phone is turned

on and its Bluetooth feature is activated.

2 Make sure that the headset is fully charged

and turned off.

3 Press and hold the call/music button until

theblueandwhiteLEDashesalternately.

» The headset remains in pairing mode

for 5 minutes.

4 Pair the headset with the mobile phone.

For detailed information, refer to the user

manual of your mobile phone.

The following example shows you how to pair

the headset with your mobile phone.

1 Activate the Bluetooth feature of your

mobile phone, select Philips Fidelio M1BT.

2 Enter the headset password "0000" (4

zeros) if prompted. For those mobile

phones featuring Bluetooth 2.1+EDR or

higher, no need to enter a password.

Settings

Devices Found

Select

10:36

Settings Connectivity

Select Back

10:37

Enter Password

****

0000

Settings

Bluetooth

Select Back

10:35

Connectivity

Add

Bluetooth

device

Back

Philips Fidelio M1BT

6EN

4 Use your

headset

Connect the headset to a

Bluetooth device

1 Turn on your mobile phone/Bluetooth

device.

2 Press and hold the call/music button to

turn the headset on.

» TheblueLEDashes.

» The headset is reconnected to

the last connected mobile phone/

Bluetooth device automatically. If the

last one is not available, the headset

tries to reconnect to the second last

connected device.

Tip

•If you turn on the mobile phone/Bluetooth device or

activate the Bluetooth feature after turning on the

headset, you have to reconnect the headset and mobile

phone/Bluetooth device manually.

Manage your calls and music

Call/Music button

Task Operation Sound or LED

indicator

Turn the

headset on.

Press and

hold for 2

seconds.

• 1 short beep

• 3whiteashes:

battery low <

25%

• 2whiteashes:

battery level <

50%

• 1blueash:

battery level >

50%

Turn the

headset off.

Press and

hold for 4

seconds.

• 1 long beep

• 1 long white

ash

Play or

pause

music.

Press once. 1 short beep

Pick up/

hang up a

call.

Press once. 1 short beep

Reject an

incoming

call.

Press and

hold

1 short beep

Redial the

last number.

Press twice. 1 short beep

Switch

caller

during a

call.

Press twice 1 long beep

Volume/Track control button

Adjust volume. Turn up/

down

N/A

Skip forward. Press once 1 short

beep

Skip backward. Press twice 1 short

beep

Mute/unmute the

microphone in a call.

Press

once

2 short

beeps

Other headset indicator status

Headset status Indicator

The headset is connected

to a Bluetooth device, while

the headset in standby

mode or while you are

listening to music.

BlueLEDashes

for every 8

seconds.

The headset is ready for

pairing.

LEDashes

blue and white

alternately.

The headset is on but not

connected to a Bluetooth

device.

BlueLEDashes

quickly.

There is an incoming call. BlueLEDashes

once per second.

7EN

Low battery. White LED

ashes.

Battery is fully charged. White LED is off.

Wear your headset

Adjusttheheadbandtotyourhead.

Tip

•After use, twist the headset for easy storage.

Use with the audio cable

Note

•Make sure that you turn off Bluetooth headset before

connecting the audio cable.

With the supplied audio cable, you can use

the headset with non-Bluetooth devices or on

airplane. No battery power is required for the

headset when you use it with the audio cable.

Connect the supplied audio cable to

• the headset and;

• an external audio device.

8EN

5 Technical data

• Minimum 10 hours of music time or talk

time

• Minimum 350 hours of standby time

• Normal time for a full charge: 3 hours

• Rechargeable Lithium-ion battery (230

mAh)

• 3.5 mm audio jack for corded headset

mode

• Bluetooth 4.0, Bluetooth mono support

(HeadsetProle-HSP,Hands-Free

Prole-HFP),Bluetoothstereosupported

(AdvancedAudioDistributionProle

- A2DP; Audio Video Remote Control

Prole-AVRCP)

• Operating range: Up to 15 meters (50

feet)

• Digital echo & noise reduction

• Supports SBC, AAC and aptX® audio

• Auto power off

Note

•Specicationsaresubjecttochangewithoutnotice.

Table des matières

Autres manuels Philips Casque audio

Philips

Philips SBC HD 1502 Manuel utilisateur

Philips

Philips SBCHP430 Manuel utilisateur

Philips

Philips SHC1300/00 Manuel utilisateur

Philips

Philips PH805 Manuel utilisateur

Philips

Philips SHC1300/ Series Manuel utilisateur

Philips

Philips SBCHP150 Manuel utilisateur

Philips

Philips SWS2000 Manuel utilisateur

Philips

Philips Fidelio L3 Manuel utilisateur

Philips

Philips TAT1138 Manuel utilisateur

Philips

Philips SHS4845 Manuel utilisateur

Philips

Philips SBCHC8441/05 Manuel utilisateur

Philips

Philips TAH6005BK/10 Manuel utilisateur

Philips

Philips TAT1215BK/10 Manuel utilisateur

Philips

Philips SHN2600/10 Manuel utilisateur

Philips

Philips SHS4847 Manuel utilisateur

Philips

Philips PN402 Manuel utilisateur

Philips

Philips SHN5200/28 Manuel utilisateur

Philips

Philips SBCHP615/00 Manuel utilisateur

Philips

Philips SBCHD1500U/05 Manuel utilisateur

Philips

Philips SHB7150 Manuel utilisateur

Philips

Philips SBCHN060/00 Manuel utilisateur

Philips

Philips SBCHC130 Manuel utilisateur

Philips

Philips SHG8010/00 Manuel utilisateur

Philips

Philips Amazone SWS8000 Manuel utilisateur

Manuels Casque audio populaires d'autres marques

Sony

Sony MDR-NC8 Manuel utilisateur

AUSounds

AUSounds AU-Stream Manuel utilisateur

ENERGY SISTEM

ENERGY SISTEM Style 7 Manuel utilisateur

Insignia

Insignia NS-CAHBTSPORT Manuel utilisateur

Movie Vision

Movie Vision HP-400 Manuel utilisateur

MobiFren

MobiFren SM Pro Manuel utilisateur

Motorola solutions

Motorola solutions PMLN8120 Manuel utilisateur

Jaybird

Jaybird freedom Guide d'installation

Sony

Sony MDR-ED12LP Manuel utilisateur

HiFuture

HiFuture Tidy Buds Pro Manuel utilisateur

Creative

Creative CB2530 Manuel utilisateur

Renkforce

Renkforce RF FTVK-100 Manuel utilisateur

Sennheiser

Sennheiser 500371 Manuel utilisateur

Califone

Califone 2924AV Manuel utilisateur

Technics

Technics EAH-AZ80 Manuel utilisateur

Bose

Bose On-Ear Headphone Manuel d'utilisation et d'entretien

Aluratek

Aluratek ABH02F Manuel utilisateur

Waterfi

Waterfi swimQ Manuel utilisateur