Philips CoolPlay KH402 Manuel utilisateur
User manual
Register your product and get support at
www.philips.com/support
KH402
CoolPlay
1 Important safety instructions 2
Hearing Safety 2
General information 2
2 Your Bluetooth wireless
headphones 3
What's in the box 3
Other devices 3
Overview of your Bluetooth
wireless headphones 3
3 Get started 4
Charge your headphones 4
Pair the headphones with your
mobile phone 5
4 Use your headphones 5
Reconnect the headphones to a
Bluetooth device 5
Manage your calls and music 5
Wear your headset 6
5 Technical data 7
6 Notice 8
Declaration of conformity 8
Disposal of your old product
and battery 8
Compliance with EMF 8
Trademarks 9
7 Frequently asked questions 10
Contents
EN 1
2 EN
Operate in a place where
temperature is between 0ºC
(32ºF) and 45ºC(113ºF) (up to
90% relative humidity).
store in a place where
temperature is between -25ºC
(-13ºF) and 55ºC(131ºF) (up to
50% relative humidity).
2 Your
Bluetooth
wireless
headset
What's in the box
Philips Wireless kid’s headphones
(TAKH402)
USB charging cable (for charging only)
Quick start guide
Other devices
Overview of your
Bluetooth wireless
headphones
A mobile phone or device (e.g.
notebook, PDA, Bluetooth adapters,
MP3 players etc) which supports
Bluetooth and is compatible to the
headset (see 'Technical data' on
page 8).
Congratulations on your purchase, and
welcome to Philips! To fully benet
from the support that Philips oers,
register your product at
www.philips.com/welcome.
With this Philips wireless headset, you
can:
• enjoy convenient wireless
handsfree calls;
• enjoy and control wireless music;
• switch between calls and music.
EN 3
+ Volume control button
Light mode control button
- Volume control button
Micro USB charging slot
On/o button
LED indicator
Microphone
3 Get started
Charge the battery
Pair the headphones with
your mobile phone
Note
Before you use your headset for the rst
time, charge the battery for 5 hours for
optimum battery capacity and lifetime.
Use only the original USB charging cable
to avoid any damage.
Finish your call before charging the
headphones, as connecting the
headphones o.
You can operate the headphones
normally during charging.
Connect the supplied USB charging
cable to:
• the micro USB charging slot on
the headphones and;
• the charger/USB port of a
computer.
LED turns white during
charging and turns o when the
headphones is fully charged
earliest paired device is replaced by the
new one.
1Make sure that the heaphones are
fully charged.
2Press and hold for 2 seconds to
turn the headphones on.
3Make sure that the mobile phone is
turned on and its Bluetooth feature
is activated.
4Pair the headphones with the
mobile phone. For detailed
information. refer to the user
manual of your mobile phone.
The following example shows you
how to pair the headphones with your
mobile phone.
1Activate the Bluetooth feature of
your mobile phone, select Philips
KH402.
2Enter the headset password”0000”
(4 zeros) if prompted. For those
mobile phones featuring Bluetooth
3.0 or higher, no need to enter a
password.
Tip
Normally,a full charge takes 2 hours.
Before you use the headphones with
your mobile phone for the rst time,
pair it with a mobile phone. A successful
pairing establishes a unique encrypted
link between the headphones and
mobile phone. The headphones store
the last 8 devices in the memory. if you
try to pair more than 8 devices,the
Philips KH402
4 EN
Tip
Note
If you turn on the mobile phone/Bluetooth
device or activate the Bluetooth feature
after turning on the headphones, you have
to reconnect the headphones and mobile
phone/Bluetooth device manually.
If the headphones fails to connect to any
Bluetooth device within range in 5 minutes, it
will power o automatically to save the battery
life.
The blue light on.
The headphones are recon-
nected to the last connected
mobile phone/Bluetooth
device automatically. If the
headphone can not connect
to last device within 13s, enter
pairing mode.
4 Use your
headphones
Turn on your mobile
phone/Bluetooth device.
Press and hold for 3 seconds to
turn the headphones on.
Connect the headphones
to a Bluetooth device
Manage your calls and
music
On/o
Task Button Operation
Task
Play or pause
music
Press
once.
Press
once.
Adjust
volume.
Skip forward.
Skip
backward.
Press and
hold for 1
second.
Press and
hold for 1
second.
Call control
Button Operation
Task
Pick up/hang
up a call.
Press and
hold for 1
second.
Reject an
incoming call.
Redial the
last call
Double
click
Press once.
Button Operation
Turn the
headpnones
on.
Press and
hold for 2
seconds.
Press and
hold for 3
seconds.
The white
light on
and fades
out.
Music control
Turn the
headpnones
o.
EN 5
Double
click
Other headphones indicator status
Headphones
status
Indicator
The headphones
are connected
to a Bluetooth
device, while the
headphones in
standby mode
or while you are
listening to music
The blue LED
ashes for every 5
seconds.
The headphones
are ready for
pairing.
The LED ashes
blue and white
alternately.
The headphones
are on but not
connected to a
Bluetooth device.
Low battery level.
Battery is fully
charged.
Light o.
The white LED
blinking 3 times for
every 1 minute
until it power o
automatically.
Adjust the headband to t your head.
The LED ashes
blue and white
alternately, the
headphones will
turn o within
5 minutes.
Mute/unmute
the microphone
in a call.
Wear your headset
6 EN
Task
Red light mode Press once.
Button Operation
RGB light mode indicator
Green light mode Press once.
Blue light mode Press once.
Light o Press once.
Rainbow light
mode Press once.
5 Technical
data
Note
Specications are subject to change without
notice.
Rechargeable batteries are only to be charged
under adult supervision.
Music time: 20 hours
Talk time: 20 hours
Standby time: 800 hours
Normal time for a full charge: 2
hours
Rechargeable lithium polymer
battery (200 mAh)
Bluetooth 5.0,
support (Hands-Free Prole - HFP),
Bluetooth stereo supported
(Advanced Audio Distribution
Prole - A2DP; Audio Video Remote
Control Prole - AVRCP)
Frequency range: 2.402-2.480GHz
Transmitter power: < 4dBm
Operating range: Up to 10 meters
(33 feet)
Digital echo & noise reduction for call clarity
Auto power o
EN 7
8 EN
EN 9
FCC Compliance Statement:
changes or modications not expressly
approved by the party responsible for
compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable protec-
tion against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful interfer-
ence to radio communications. However,
there is no guarantee that interference
will not occur in a particular installation.
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels Philips Casque audio
Philips
Philips TAT1138 Manuel utilisateur
Philips
Philips SHG8015 Manuel utilisateur
Philips
Philips SBCHC630/00 Manuel utilisateur
Philips
Philips SHS5300 Manuel utilisateur
Philips
Philips SBCHC8440/05 Manuel utilisateur
Philips
Philips Fidelio L4 Manuel utilisateur
Philips
Philips 6000 Series Manuel utilisateur
Philips
Philips SHQ1000 Manuel utilisateur
Philips
Philips CRP267 Manuel utilisateur
Philips
Philips shs391 Manuel utilisateur
Philips
Philips HP430 Manuel utilisateur
Philips
Philips SHB3060 Manuel utilisateur
Philips
Philips SHH9508 Manuel utilisateur
Philips
Philips SBC HC210 Manuel utilisateur
Philips
Philips 1000 Series Manuel utilisateur
Philips
Philips ActionFit SH402 Manuel utilisateur
Philips
Philips SHE3600 Manuel utilisateur
Philips
Philips SBCHD1505U/00 Manuel utilisateur
Philips
Philips SHE9503 Manuel utilisateur
Philips
Philips SHE2631 Manuel utilisateur
