Philips HQ6923 Manuel utilisateur

HQ6900

series

HQ6900 series

ENGLISH 4

INDONESIA 13

한국어 22

BAHASA MELAYU 31

ภาษาไทย 40

TIẾNG VIỆT 48

繁體中文 57

简体中文 65

Introduction

Congratulations on your purchase and welcome to Philips!

To fully benet from the support that Philips offers, register your

product at www.philips.com/welcome.

The Close Cut system ensures a close and easy shave every day.

For the best result, move the shaving heads over your skin in both

straight and circular movements.

Important safety information

Read this important information carefully before you use the appliance and

its accessories and save it for future reference.The accessories supplied

may vary for different products.

Danger

- Keep the appliance and the mains cord dry.

Warning

- This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person responsible

for their safety.

- Children should be supervised to ensure that they do not play with

the appliance.

- Always check the appliance before you use it. Do not use the appliance

if it is damaged, as this may cause injury. Always replace a damaged part

with one of the original type.

Caution

- Only use this appliance for its intended purpose as shown in the user

manual.

- For hygienic reasons, the appliance should only be used by one person.

- Never use compressed air, scouring pads, abrasive cleaning agents or

aggressive liquids such as petrol or acetone to clean the appliance.

Electromagnetic elds (EMF)

- This Philips appliance complies with all applicable standards and

regulations regarding exposure to electromagnetic elds.

General

- The appliance is suitable for mains voltages ranging from

100 to 240 volts.

General description (Fig. 2)

1 Protection cap

2 Shaving unit

3 Shaver on/off slide

4 Charging light (HQ6996, HQ6990, HQ6986, HQ6976, HQ6950,

HQ6947, HQ6927, HQ6926, HQ6925, HQ6923 only)

5 Trimmer (HQ6996, HQ6990, HQ6976, HQ6950, HQ6946 only)

6 Trimmer slide (HQ6996, HQ6990, HQ6976, HQ6950, HQ6946 only)

7 Cleaning brush

8 Mains cord with plug

9 Appliance plug

ENGLISH

Charging

Charge the appliance:

- before rst use and when you have not used the appliance for a

long time

- when the motor stops or starts running slower

When you have charged the shaver for the rst time and after a long

period of disuse, optimise the battery capacity in the following way:

1 Fully charge the shaver and then use it normally until the battery is

completely empty. Repeat this process two more times. If you optimise

the battery capacity in this way, you can also charge the shaver in

between shaves, even if the battery is not completely empty yet.

Charging the shaver (HQ6996, HQ6990, HQ6986, HQ6976,

HQ6950, HQ6947, HQ6927, HQ6926, HQ6925, HQ6923 only)

Quick charge (HQ6996, HQ6990, HQ6986 only)

After the shaver has charged for 3 minutes, it contains enough energy for

one cordless shave.

Charging with the adapter

1 Put the appliance plug in the shaver.

2 Put the mains plug in the wall socket.

Note: Make sure the shaver is switched off.

,The charging light goes on.

,HQ6996, HQ6990, HQ6986: Charge the shaver for at least 1 hour,

but not more than 24 hours.

When the battery is fully charged, the charging light starts ashing.

,HQ6976, HQ6950, HQ6947, HQ6927, HQ6926, HQ6925, HQ6923:

Charge the shaver for at least 8 hours, but not more than 24 hours.

The charging light lights up continuously as long as the appliance is

connected to the mains.

Note: Do not leave the shaver connected to the mains continuously.

Note:You can also shave without charging. Simply connect the shaver to

the mains.

3 Remove the mains plug from the wall socket and pull the appliance

plug out of the shaver when the battery is fully charged.

Using the appliance

HQ6996, HQ6990, HQ6986, HQ6976, HQ6950, HQ6947, HQ6927,

HQ6926, HQ6925, HQ6923 only: You can use the shaver directly from

the mains but also without a cord.

HQ6946, HQ6906, HQ6902: You can only use the shaver directly from

the mains.

ENGLISH 5

Preparing for use (HQ6946, HQ6906, HQ6902 only)

1 Put the appliance plug in the shaver.

2 Put the mains plug in the wall socket.

Shaving

1 Push the on/off slide upwards to switch on the shaver.

2 Move the shaving heads over your skin. Make circular movements.

Shaving on a dry face gives the best results.

Your skin may need 2 or 3 weeks to get accustomed to the Philips

shaving system.

3 Push the on/off slide downwards to switch off the shaver.

4 Put the protection cap on the shaver every time you have used it,

to prevent damage.

Trimming (HQ6996, HQ6990, HQ6976, HQ6950, HQ6946 only)

You can use the trimmer to trim your sideburns and moustache.

1 Push the trimmer slide upwards to open the trimmer.

The trimmer can be activated while the motor is running.

Cleaning and maintenance

Regular cleaning guarantees better shaving performance.

This appliance is not washable. Never immerse the appliance in water,

nor rinse it under the tap.

Never use scouring pads, abrasive cleaning agents or aggressive liquids

such as petrol or acetone to clean the appliance.

- For easy and optimal cleaning, Philips Shaving Head Cleaning Spray

(type no. HQ110) is available. Ask your Philips dealer for information.

Note: Philips Shaving Head Cleaning Spray may not be available in all

countries. Contact the Consumer Care Centre in your country about the

availability of this accessory.

You can also clean the shaver in the following way:

ENGLISH6

Every week: shaving unit and hair chamber

1 Switch off the shaver. Remove the mains plug from the wall socket

and pull the appliance plug out of the shaver.

2 Cleanthetopoftheappliancerst.Usethecleaningbrushsupplied.

3 Press the release button (1) and remove the shaving unit (2).

4 Clean the inside of the shaving unit and the hair chamber with the

cleaning brush.

5 Put the shaving unit back onto the shaver.

ENGLISH 7

Every month: shaving heads

1 Switch off the shaver. Remove the mains plug from the wall socket

and pull the appliance plug out of the shaver.

2 Press the release button (1) and remove the shaving unit (2).

3 Turn the wheel anticlockwise (1) and remove the retaining frame (2).

4 Remove the shaving heads (cutters and guards) one by one and clean

them with the cleaning brush supplied.

Note: Do not clean more than one cutter and guard at a time, since they are

all matching sets. If you accidentally mix up the cutters and guards, it may take

several weeks before optimal shaving performance is restored.

5 Clean the cutter with the short-bristled side of the cleaning brush.

Brush carefully in the direction of the arrow.

6 Brush the guard.

ENGLISH8

7 Put the shaving heads back into the shaving unit. Put the retaining

frame back into the shaving unit, push it down (1) and turn the

wheel clockwise (2).

8 Put the shaving unit back onto the shaver.

Extra-thorough cleaning

For extra-thorough cleaning, put the shaving heads in a degreasing liquid

(e.g. alcohol) every six months. To remove the shaving heads, follow steps

1 to 4 described above. After cleaning, lubricate the central point on the

inside of the guards with a drop of sewing machine oil to prevent wear of

the shaving heads.

Trimmer (HQ6996, HQ6990, HQ6976, HQ6950, HQ6946 only)

Clean the trimmer every time you have used it.

1 Switch off the shaver. Remove the mains plug from the wall socket

and pull the appliance plug out of the shaver.

2 Clean the trimmer with the cleaning brush supplied.

Tip: Lubricate the trimmer teeth with a drop of sewing machine oil every

six months.

Storage

1 Put the protection cap on the shaver to prevent damage.

ENGLISH 9

Replacement

Replace the shaving heads every two years for optimal shaving results.

Replace damaged or worn shaving heads with HQ56 Philips Shaving

Heads only.

1 Switch off the shaver. Remove the mains plug from the wall socket

and pull the appliance plug out of the shaver.

2 Press the release button (1) and remove the shaving unit (2).

3 Turn the wheel anticlockwise (1) and remove the retaining frame (2).

4 Remove the shaving heads and place new ones in the shaving unit.

5 Put the retaining frame back into the shaving unit, push it down (1)

and turn the wheel clockwise (2).

6 Put the shaving unit back onto the shaver.

ENGLISH10

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Philips Rasoir électrique

Philips

Philips NORELCO AT620 Manuel utilisateur

Philips

Philips Norelco QC5130 Manuel utilisateur

Philips

Philips HQ 8894 Manuel utilisateur

Philips

Philips RQ1290 Series Manuel utilisateur

Philips

Philips 8138XL/43 Manuel utilisateur

Philips

Philips QG3380 Manuel utilisateur

Philips

Philips HQ6645 Manuel utilisateur

Philips

Philips qg3393 Manuel utilisateur

Philips

Philips RQ371 Manuel utilisateur

Philips

Philips NT9141 Manuel utilisateur

Philips

Philips HQ 7742 Manuel utilisateur

Philips

Philips OneBlade QP2529/95 Manuel utilisateur

Philips

Philips HQ8255/19 Manuel utilisateur

Philips

Philips Essence 5000 Series Manuel utilisateur

Philips

Philips HQ5413 Manuel utilisateur

Philips

Philips BRL180 Manuel utilisateur

Philips

Philips SP9871 Manuel utilisateur

Philips

Philips HQ177/3P/171/5P Manuel d'utilisation et d'entretien

Philips

Philips HQ6757 Manuel utilisateur

Philips

Philips PQ205 Manuel utilisateur

Philips

Philips CoolSkin HQ6762 Manuel utilisateur

Philips

Philips MG7750 Manuel utilisateur

Philips

Philips QT4018 Manuel utilisateur

Philips

Philips BG2038 Manuel utilisateur

Manuels Rasoir électrique populaires d'autres marques

Norelco

Norelco Quadra 7610X Manuel utilisateur

Braun

Braun WaterFlex WF2s Manuel utilisateur

Daga

Daga MT-400 Manuel

Remington

Remington BHT100 Manuel utilisateur

Kompernass

Kompernass KH 5537 Manuel utilisateur

Remington

Remington BHT6100 Manuel utilisateur

MIA

MIA Aqua Body Manuel utilisateur

Matheo

Matheo MLR 15 Manuel utilisateur

CTC Union

CTC Union Clatronic HSM 3441 NE Manuel utilisateur

Remington

Remington XR7000 Manuel utilisateur

Eldom

Eldom G47 Manuel utilisateur

Braun

Braun silk-epil 5 Manuel utilisateur

SEVERIN

SEVERIN SÉRIE E700 0533 Guide de l'utilisateur

Remington

Remington PR1355 Manuel utilisateur

Aurora

Aurora AU 3543 Manuel utilisateur

Braun

Braun InterFace 3614 Manuel utilisateur

Wahl

Wahl 8061 5-STAR Manuel utilisateur

Norelco

Norelco 4404LC Manuel utilisateur