Philips HR2860 Manuel utilisateur
HR2860
2
3
1
4
HR2860
ENGLISH 6
한국어 18
繁體中文 30
简体中文 40
6
Introduction
Congratulations on your purchase and welcome to Philips! To fully benet
from the support that Philips offers, register your product at www.philips.
com/welcome.
General description (Fig. 1)
AMains cord
BOn/off button
CMotor unit
DIntegrated blade unit of blender
EBlender beaker
FLid of blender beaker
GRubber sealing ring for blender lid
HStopper
IWet mill beaker
JLid of wet mill beaker
KBlade unit of wet mill
LBuilt-in safety lock
MDry mill beaker
NBlade unit of dry mill
OLid of dry mill beaker
PCord storage
QRubber ring
Important
Read this user manual carefully before you use the appliance and save it
for future reference.
Danger
Never immerse the motor unit in water or any other liquid, nor rinse
it under the tap. Only use a moist cloth to clean the motor unit.
Warning
Check if the voltage indicated on the appliance corresponds to the
local mains voltage before you connect the appliance.
-
-
ENGLISH
Do not use the appliance if the mains cord, the plug or other parts
are damaged.
If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
Never reach into the blender beaker with your ngers or an object
while the appliance is plugged in or operates.The blades are very
sharp.
If the blades get stuck, unplug the appliance before you remove the
ingredients that block the blades.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
Never let the appliance run unattended.
Never use the blender beaker, the dry mill beaker or the wet mill
beaker to switch the appliance on and off.
Do not use the dry mill to grind very hard ingredients such as
nutmeg, Chinese rock sugar and ice cubes
Do not use the wet mill to mix liquids or to crush ice cubes. Use the
blender to process these ingredients.
Do not touch the cutting edges of the blade units when you handle
or clean them.They are very sharp and you could easily cut your
ngers on them.
Caution
Always unplug the appliance before you assemble, disassemble or
make adjustments to the blender, the dry mill or the wet mill
and before you start to clean the appliance.
Never use any accessories or parts from other manufacturers or that
Philips does not specically recommend. If you use such accessories
or parts, your guarantee becomes invalid.
Do not exceed the maximum level indicated on the accessories.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ENGLISH 7
Do not exceed the maximum quantities and processing times
indicated in the table.
Let hot ingredients cool down before you chop them in the wet mill
or pour them into the blender beaker (max. temperature 80°C).
Never use the dry mill or wet mill for more than 30 seconds without
interruption.
Always process cloves, star anise and aniseed in the dry mill together
with other ingredients. If processed separately, these ingredients may
attack the plastic materials of the dry mill
Do not process dry ingredients such as coffee beans and dried beans
in the wet mill.
Safety features
Built-in safety lock
This feature ensures that you can only switch on the appliance if the
beakers have been placed on the motor unit in the correct position.
When the beakers have been assembled correctly, the built-in safety lock
is unlocked.
Thermal cut-out
The appliance is equipped with a thermal cut-out that automatically cuts
off the power supply to the appliance if it overheats.
If the appliance suddenly stops running:
1 Pull the plug out of the wall socket.
2 Let the appliance cool down for 30 minutes.
3 Put the plug in the wall socket.
4 Switch on the appliance again.
Contact your Philips dealer or an authorised Philips service centre if the
thermal cut-out is activated too often.
To avoid a hazardous situation due to inadvertent resetting of the
thermal cut-out, never connect this appliance to a timer switch.
-
-
-
-
-
ENGLISH8
Electromagnetic elds (EMF)
This Philips appliance complies with all standards regarding
electromagnetic elds (EMF). If handled properly and according to the
instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
Before rst use
1 Clean all parts except the motor unit (see chapter ‘Cleaning’).
2 Wind excess mains cord round the base of the motor unit (Fig. 2).
Using the appliance
Blender
The blender is intended for:
Blending uids, e.g. dairy products, sauces, fruit juices, soups, mixed
drinks, shakes.
Mixing soft ingredients, e.g. almond tea.
1 Put the ingredients in the blender beaker (Fig. 3).
Do not ll the blender beaker beyond the MAX indication.
See the table for the recommended quantities.
Never ll the blender beaker with ingredients that are hotter than
80°C.
Ingredients blender Quantities
fruit 20g
vegetables 100g
vegetable juice 100g vegetables + water (optional)
milkshake 100g fruit + 150ml milk
soy beans 50g soy beans (soaked for 4 hours) +
250ml water
-
-
ENGLISH 9
Ingredients blender Quantities
almond tea 75g almonds + 200ml water
black sesame tea 75g black sesame seeds + 200ml water
2 Press the lid into place.
3 Place the blender beaker on the motor unit (1).Turn the blender
beaker clockwise to fasten it (2) (‘click’) (Fig. 4).
Do not exert too much pressure on the blender beaker.
4 Put the plug in the wall socket and press the on/off button.
Hold the motor unit rmly with both hands when the appliance operates.
Do not operate the blender for more than 1 minute at a time.
If you have not nished blending after 1 minute, switch off the appliance
and wait 1 minute before you continue. If the appliance becomes hot, let
it cool down before you continue.
Never reach into the blender beaker with your ngers or an object (e.
g. a spatula) while the blender operates.
Do not touch the sharp blades. If the blades get stuck, unplug the
appliance and remove the ingredients that block the blades with a
spatula.
Tips
To avoid spillage, never ll the blender beaker above the maximum
level indication (0.4 litres).
You can pour liquid ingredients (e.g. oil) into the blender beaker
through the opening in the lid while the appliance operates (Fig. 5).
Cut solid ingredients into smaller pieces (1-2cm) before you put
them in the blender beaker. Do not process a large quantity of solid
ingredients at the same time. Process these ingredients in a series of
small batches instead.
-
-
-
ENGLISH10
Autres manuels pour HR2860
4
Table des matières
Langues :
Autres manuels Philips Mixer
Philips
Philips HR1602 Manuel utilisateur
Philips
Philips HR2161/41 Manuel utilisateur
Philips
Philips Viva ProMix HR2657/90 Manuel utilisateur
Philips
Philips HR1609 Manuel utilisateur
Philips
Philips HR2160 Manuel utilisateur
Philips
Philips HR2870/60 Manuel utilisateur
Philips
Philips HR1600 Manuel utilisateur
Philips
Philips HR1720/AC Manuel utilisateur
Philips
Philips HR1365 Manuel utilisateur
Philips
Philips HR3868 Manuel utilisateur
Philips
Philips HR2084/90 ROW Manuel utilisateur
Philips
Philips HR1399 Manuel utilisateur
Philips
Philips HR1627 Manuel utilisateur
Philips
Philips SCF875 Manuel utilisateur
Philips
Philips HR2200/80 Manuel utilisateur
Philips
Philips HR2200/80 Manuel utilisateur
Philips
Philips HR2027 Manuel utilisateur
Philips
Philips HR2096 Manuel utilisateur
Philips
Philips AVENT SCF875/02 Manuel utilisateur
Philips
Philips HR2870 Manuel utilisateur
