Philips AC2887 Manuel utilisateur
1
B
A
C
ED F
G
2
H J K M NL PO QI AC2887
I N OH J MK L AC2882
EN User manual 1
KK Қолданушыныңнұсқасы 15
RU Руководствопользователя 31
49 AR
63 FA
© 2017 Koninklijke Philips N.V.
All rights reserved.
4241 210 87522
AC2887
AC2882
3s
3s 3s
3s
3s
3s
3
11
7
15
19
5
13
9
17
21
6
14
10
18
22
4
12
8
16
20
23
31
27
25
29
33
26
30
34
24
28
32
1EN
English
Contents
1 Important 2
Safety 2
2 Yourairpurier 4
Product overview (g.a) 4
Controls overview (g.b) 5
3 Getting started 5
Installing lters 5
4 Usingtheappliance 6
Understanding the air quality light 6
Switching on and off 6
Changing the Auto mode setting 6
Changing the fan speed 7
Setting the timer 7
Using the light on/off function 7
5 Cleaning 8
Cleaning schedule 8
Cleaning the body of the appliance 8
Cleaning the air quality sensor 8
Cleaning the pre-lter (g.v) 9
6 Replacingthelter 9
Understanding the healthy air protect
lock 9
Replacing the lters (g.y) 9
Filter force reset 10
Filter type change 10
7 Troubleshooting 11
8 Guaranteeandservice 13
Order parts or accessories 13
9 Notices 13
Electromagnetic elds (EMF) 13
Recycling 13
2EN
1 Important
Safety
Read this user manual carefully before you use
the appliance, and save it for future reference.
Danger
• Do not let water or any other
liquid or ammable detergent
enter the appliance to avoid
electric shock and/or a re
hazard.
• Do not clean the appliance
with water, any other liquid,
or a (ammable) detergent to
avoid electric shock and/or a
re hazard.
• Do not spray any ammable
materials such as insecticides or
fragrance around the appliance.
Warning
• Check if the voltage indicated
on the appliance corresponds
to the local power voltage
before you connect the
appliance.
• If the power cord is damaged,
you must have it replaced
by Philips, a service center
authorized by Philips, or
similarly qualied persons in
order to avoid a hazard.
• Do not use the appliance if the
plug, the power cord, or the
appliance itself is damaged.
• The appliance is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance by a person
responsible for their safety.
• Children should be supervised
to ensure that they do not play
with the appliance.
• Do not block the air inlet and
outlet, e.g. by placing items on
the air outlet or in front of the
air inlet.
• Make sure that foreign objects
do not fall into the appliance
through the air outlet.
Caution
• This appliance is not a
substitute for proper
ventilation, regular vacuum
cleaning, or use of an extractor
hood or fan while cooking.
• If the power socket used
to power the appliance has
poor connections, the plug
of the appliance becomes
hot. Make sure that you plug
3EN
English
the appliance into a properly
connected power socket.
• Always place and use the
appliance on a dry, stable, level,
and horizontal surface.
• Leave at least 20cm free space
behind and on both sides of
the appliance and leave at least
30cm free space above the
appliance.
• Do not place anything on top
of the appliance.
• Do not sit or stand on the
appliance. Sitting or standing
on the appliance may lead to
potential injuiry.
• Do not place the appliance
directly below an air
conditioner to prevent
condensation from dripping
onto the appliance.
• Make sure all lters are
properly installed before you
switch on the appliance.
• Only use the original Philips
lters specially intended for
this appliance. Do not use any
other lters.
• Combustion of the lter may
cause inreversible human
hazard and/or jeopardize other
lives. Do not use the lter as
fuel or for similar purpose.
• Avoid knocking against the
appliance (the air inlet and
outlet in particular) with hard
objects.
• Always lift or move the
appliance by the handle on
back side of the appliance.
• Do not insert your ngers or
objects into the air outlet or
the air inlet to prevent physical
injury or malfunctioning of the
appliance.
• Do not use this appliance
when you have used indoor
smoke-type insect repellents
or in places with oily residues,
burning incense, or chemical
fumes.
• Do not use the appliance near
gas appliances, heating devices
or replaces.
• Always unplug the appliance
after use and before cleaning,
or carrying out other
maintenance or replacing the
lters.
• Do not use the appliance in a
room with major temperature
changes, as this may cause
condensation inside the
appliance.
4EN
2 Your air purifier
Congratulations on your purchase, and
welcome to Philips!
To fully benet from the support that Philips
offers, register your product at
www.philips.com/welcome.
Productoverview(g.a)
AControl panel
BAir quality light
CAir quality sensors
DNanoProtect lter HEPA Series 3
(FY2422)*
ENanoProtect lter AC (FY2420)*
FPre-lter
GFront panel
* Hereinafter referred to as air purication lter
• To prevent interference, place
the appliance at least 2 meters
away from electrical appliances
that use airborne radio waves
such as TVs, radios, and radio-
controlled clocks.
• The appliance is only intended
for household use under
normal operating conditions.
• Do not use the appliance
in wet surroundings or in
surroundings with high ambient
temperatures, such as the
bathroom, toilet, or kitchen.
• The appliance does not remove
carbon monoxide (CO) or
radon (Rn). It cannot be used
as a safety device in case of
accidents with combustion
processes and hazardous
chemicals.
• If you need to move the
appliance, disconnect the
appliance from the power
supply rst.
• Do not move the appliance by
pulling its power cord.
• Always cleanse your hands
after changing the lters.
5EN
English
3 Getting started
Installinglters
Note
• Make sure the air purier is unplugged from
the electrical outlet before installing the lters.
• Make sure the side of the lter with the tag is
pointing towards you.
1 Remove all packaging materials of the air
purication lters (g.c).
2 Pull the bottom part of the front panel to
remove it from the appliance (g.d).
3 Press the two clips down and pull the pre-
lter towards you (g.e).
4 Put the unpacked air purication lters
back into the appliance (g.f).
5 Attach the pre-lter back into the
appliance (g.g).
Note
• Make sure that the side with the two clips is
pointing towards you, and that all hooks of the
pre-lter are properly attached to the purier.
6 Reattach the front panel by pressig the
top part of the panel onto the top of the
air purier (1). Then, gently push the panel
against the body of the air purier (2)
(g.h).
7 Wash your hands thoroughly after installing
lters.
Controlsoverview(g.b)
ForAC2887
HOn/Off button
ILight dimming button
JAuto mode button
KDisplay screen
LGeneral mode icon
MAllergen mode icon
NBacteria&Virus mode icon
OFan speed button
PTimer button
QReset button
ForAC2882
HOn/Off button
IAuto mode button
JDisplay screen
KGeneral mode icon
LAllergen mode icon
MBacteria&Virus mode icon
NFan speed button
OReset button
6EN
»For AC2882, after measuring the
particle matters in the air, the
appliance operates in auto mode with
displayed on the screen (g.k).
3 Touch and hold for 3 seconds to switch
off the appliance.
Note
• If the air purier stays connected to the
electrical outlet after turning OFF, the air
purier will operate under the previous
settings when turned ON again.
ChangingtheAutomode
setting
You can choose the General mode
( ), the Allergen mode ( ) and the
Bacteria & Virus mode ( ).
Generalmode
The specially designed general mode can
effectively remove airborne pollutants such as
pm2.5.
• Touch the Auto mode button to select
the Pollution mode (g.k).
»Auto (A) and display on the
screen.
Allergenmode
The specially designed allergen mode can
effectively remove common allergens such as
pollen and pet dander.
• Touch the Auto mode button to select
the Allergen mode (g.l).
»Auto (A) and display on the
screen.
4 Usingtheappliance
Understandingtheairquality
light
Airqualitylightcolor Airqualitylevel
Blue Good
Blue-violet Fair
Red-purple Unhealthy
Red Very unhealthy
The air quality light automatically goes on when
the air purier is switched on, and lights up all
colors in sequence. After approximately 30
seconds, the air quality sensors select the color
that corresponds to the surrounding air quality
of airborne particles.
Switchingonandoff
1 Put the plug of the appliance in the wall
outlet.
2 Touch to switch on the appliance
(g.i).
»The appliance beeps.
»The appliance operates under the
general mode by default.
»After measuring the air quality for
a short time, the air quality sensor
automatically selects the color of the
air quality light.
»For AC2887, " " displays on the
screen when the appliance is warming
up. After measuring the particle
matters in the air, the appliance goes
to auto mode with xx displayed on
the screen (g. j).
7EN
English
Bacteria&Virusmode
The specially designed bacteria&virus mode can
effectively remove bacteria & viruses such as
staphylococcus albsp and H1N1.
• Touch the Auto mode button to select
the Bacteria & Virus mode (g.m).
»Auto (A) and display on the
screen.
Changingthefanspeed
There are several fan speeds available. You can
choose the sleep mode (SL), speed 1, 2, 3 or
turbo mode (t).
Sleep(SL)
In sleep mode, the appliance operates quietly
under very low speed.
• Touch the fan speed button to select
the sleep mode (SL) (g.n).
Note
• In sleep mode, "SL" displays on the screen for
one minute. After that,all the lights will go off
and the display screen will be dimmed with "
" displayed.
• You can turn on the lights manually by
touching .
Manual
• Touch the fan speed button repeatedly
to select the fan speed you need (g.p).
Turbo(t)
In turbo mode, the appliance operates under
the highest speed.
• Touch the fan speed button to select
the turbo mode (t) (g.o).
Settingthetimer
Note
• The timer function is only applicable for
AC2887.
With the timer, you can let the appliance
operate for a set number of hours. When
the set time has elapsed, the appliance will
automatically switch off.
• Touch the timer button repeatedly to
choose the number of hours you want the
appliance to operate (g.q).
»The timer has set intervals of 1,4or
8hours.
To deactivate the timer, touch the timer button
repeatedly until "--"displays on the screen.
Note
• If you have set the timer once, next time when
you use the timer, it starts from the previous
setting time.
Usingthelighton/offfunction
Note
• The light dimming function is only applicable
for AC2887.
With the light dimming button, you can switch
on or off the air quality light, the display screen
and the function indicators if needed.
1 Touch the light dimming button once,
the air quality light will be dimmed.
2 Touch the light dimming button again,
the air quality light will go off. The display
screen and the function indicators will still
be on, but the lights will be dimmed with
" " displayed on the screen.
3 Touch the light dimming button for the
third time, all lights will be on again.
8EN
5 Cleaning
Note
• Always turn the air purier off and unplug
from the electrical outlet before cleaning.
• Never immerse the appliance in water or any
other liquid.
• Never use abrasive, aggressive, or ammable
cleaning agents such as bleach or alcohol to
clean any part of the appliance.
• Only the pre-lter is washable. The air
purication lter is not washable nor vacuum
cleanable.
Cleaningschedule
Frequency Cleaningmethod
When necessary
Wipe the surface of
the appliance with a
soft dry cloth
When F0 displays on
the screen Clean the pre-lter
Every two months Clean the air quality
sensors
Cleaningthebodyofthe
appliance
Regularly clean the inside and outside of the air
purier to prevent dust from collecting.
1 Use a soft, dry cloth to clean both the
interior and exterior of the air purier.
2 The air outlet can also be cleaned with a
dry, soft cloth.
Cleaningtheairquality
sensor
Clean the air quality sensor every 2 months for
optimal functioning of the purier. Clean them
more frequently if you use the purier in a
dusty environment.
Note
• When the humidity level in the room is very
high, it is possible that condensation develops
on the air quality sensor. As a result, the air
quality light may indicate that the air quality
is bad even though it is good. In this case you
have to clean the air quality sensor or use one
of the manual speed settings.
1 Switch off the air purier and unplug from
the wall outlet.
2 Clean the air quality sensor inlet and outlet
with a soft brush (g.r).
3 Remove the air quality sensor cover
(g.s).
4 Clean the air quality sensor, the dust inlet
and the dust outlet with a lightly moistened
cotton swab (g.t).
5 Dry them with a dry cotton swab.
6 Reattach the air quality sensor cover
(g.u).
Autres manuels pour AC2887
3
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Philips Purificateur d'air
Philips
Philips AC3055 Manuel utilisateur
Philips
Philips AC4025 Manuel utilisateur
Philips
Philips AC3855 Manuel utilisateur
Philips
Philips 4000i Series Manuel utilisateur
Philips
Philips AC4064 Manuel utilisateur
Philips
Philips 4000i Series Manuel utilisateur
Philips
Philips AC5665 Manuel utilisateur
Philips
Philips AC3033/86 Manuel utilisateur
Philips
Philips AC2959/53 Manuel utilisateur
Philips
Philips AC6710 Manuel utilisateur
Philips
Philips AC4026 Manuel utilisateur
Philips
Philips AC2887/10 Manuel utilisateur
Philips
Philips AC3821 Manuel utilisateur
Philips
Philips KJ550F-D17 Manuel utilisateur
Philips
Philips AC0819/80 Manuel utilisateur
Philips
Philips AC4062 Manuel utilisateur
Philips
Philips AC8612 Manuel utilisateur
Philips
Philips AC4025/10 Manuel utilisateur
Philips
Philips 2000i Series Manuel utilisateur
Philips
Philips AC3833 Manuel utilisateur
Manuels Purificateur d'air populaires d'autres marques
Winix
Winix NK300 Manuel utilisateur
Friedrich
Friedrich C-90A Instructions d'utilisation et d'installation
Surgically Clean Air
Surgically Clean Air JADE2.0 Manuel utilisateur
Base aire
Base aire 555 Pro Manuel utilisateur
Champion
Champion CP25 Manuel utilisateur
vollara
vollara Air & Surface Pro+ Manuel utilisateur