Perma STAR VARIO Manuel utilisateur
The Expert in Lubrication Solutions
perma STAR VARIO
Pocket Guide
The perma STAR VARIO is set and controlled via a simple to navigate menu
using a single SET button. The menu is intuitive and requires minimal
manipulation after the initial setting.
Features which support simple operation and error
minimisation include:
Initial set screen
A new lubricator displays on the LCD. This forces users to set the time
and LC (lubricant canister) size before the lubricator can be turned on.
Automatic restart
When the LC and battery set is changed the lubricator automatically
restarts meaning that there is no need to use the SET button when servicing
lubricators.
Battery insertion
and initial assembly
| 2
21 3
Insert battery set into the underside of the DRIVE. It will click into place.
The DRIVE will perform a self-test, during which the LED system
will change from red to green to orange and the drive motor will run
continuously.
Sit the DRIVE on top of the LC so that the socket of the DRIVE engages
correctly with the hexagonal head of the LC spindle.
Secure it by rotating the collar until it comes to its stop point.
When correctly assembled
the white triangle markings
around the DRIVE will be
visible as shown.
A
B
CLICK!
= OK
OK
© 2022 – HTL perma Australia Pty Ltd | www.perma.com.au | 3
New DRIVE which
has not been set
The LC SIZE, TIME interval type (months or weeks) and TIME setting must be
assigned for each new DRIVE before rst use.
A B
Insert a new battery set. The
lubricator will perform a self-test
and display .
=
=
=
=
The lines at the bottom of the
display indicate the SIZE options
of 60, 120, 250 and 500cm3.
Press the SET button for 5
seconds and the lines will begin
to ash.
Release and press the button to
scroll through the SIZE options.
Stop at the desired size.
Setting
for the rst time
| 4
The setting will now be displayed
and after 8 seconds the lubricator
will perform its initialisation run
cycle.
At the end of the run cycle the
display will return to the allocated
setting.
C E
After the SIZE has been
assigned, wait for 'm' (months)
to be displayed. Press the button
to toggle between 'm' (months)
and 'w' (weeks). Stop at the
desired TIME interval type.
D
Press and release the button to
scroll through the TIME options.
Stop at the desired setting.
Wait for the screen to go to the
off status .
Press the SET button for 1
second to turn the lubricator
ON.
26
12
months
weeks Example - 120cm3 set to 3 months.
© 2022 – HTL perma Australia Pty Ltd | www.perma.com.au | 5
A B
Changing the setting
after initial programming
After initial programming, the assigned settings can be changed at anytime from
either the ON or OFF status.
Press the SET button for 5
seconds.
Press and release the SET button
to scroll to the new SIZE setting
=
=
=
=
26
12
months
weeks
Wait for the TIME interval type to
start ashing.
Select the new TIME interval
type.
Wait for the TIME setting to start
ashing.
Select the new TIME setting.
| 6
The lubricator can be turned OFF at anytime except during a run cycle.
If a lubricator is turned OFF for a period of time it will retain memory of its
operational status and recommence the lubricant delivery program from
that point when turned back ON.
It is important to note that turning the lubricator OFF and ON does not reset
the memory of the grease volume remaining. The only way to reset the
memory is to remove and re-insert the battery set.
off
A B
Turning OFF and ON
Press the SET button for 1
second to turn the DRIVE OFF.
The off screen will be displayed.
Press the SET button for 1
second to restart the lubricator.
The programmed setting will be
shown.
© 2022 – HTL perma Australia Pty Ltd | www.perma.com.au | 7
Dispensing rates
Weekly settings
1 8.57 17.14 35.71 71.43
2 4.29 8.57 17.86 35.71
3 2.86 5.71 11.90 23.81
4 2.14 4.29 8.93 17.86
5 1.71 3.43 7.14 14.29
6 1.43 2.86 5.95 11.90
7 1.22 2.45 5.10 10.20
8 1.07 2.14 4.46 8.93
9 0.95 1.90 3.97 7.94
10 0.86 1.71 3.57 7.14
11 0.78 1.56 3.25 6.49
12 0.71 1.43 2.98 5.95
13 0.66 1.32 2.75 5.49
Time
setting,
weeks
Daily dispensing rate, cm³ per day
60cm³ 120cm³ 250cm³ 500cm³
The dispensing rate data tabled below applies to the perma STAR VARIO
and STAR VARIO BLUETOOTH®. Details on the dwell time between lubricant
delivery cycles are available upon request.
| 8
Time
setting,
weeks
Daily dispensing rate, cm³ per day
60cm³ 120cm³ 250cm³ 500cm³
14 0.61 1.22 2.55 5.10
15 0.57 1.14 2.38 4.76
16 0.54 1.07 2.23 4.46
17 0.50 1.01 2.10 4.20
18 0.48 0.95 1.98 3.97
19 0.45 0.90 1.88 3.76
20 0.43 0.86 1.79 3.57
21 0.41 0.82 1.70 3.40
22 0.39 0.78 1.62 3.25
23 0.37 0.75 1.55 3.11
24 0.36 0.71 1.49 2.98
25 0.34 0.69 1.43 2.86
26 0.33 0.66 1.37 2.75
© 2022 – HTL perma Australia Pty Ltd | www.perma.com.au | 9
Dispensing rates
Monthly settings
The dispensing rate data tabled below applies to the perma STAR VARIO
and STAR VARIO BLUETOOTH®. Details on the dwell time between lubricant
delivery cycles are available upon request.
1 2.0 4.0 8.3 16.45
2 1.0 2.0 4.2 8.22
3 0.67 1.3 2.8 5.48
4 0.50 1.0 2.1 4.11
5 0.40 0.80 1.7 3.29
6 0.33 0.67 1.4 2.74
7 0.29 0.57 1.2 -
8 0.25 0.50 1.0 -
9 0.22 0.44 0.93 -
10 0.20 0.40 0.83 -
11 0.18 0.36 0.76 -
12 0.17 0.33 0.69 -
Time
setting,
months
Daily dispensing rate, cm³ per day
60cm³ 120cm³ 250cm³ 500cm³
| 10
Autres manuels pour STAR VARIO
8
Table des matières
Autres manuels Perma Système de lubrification
Perma
Perma STAR VARIO Manuel utilisateur
Perma
Perma FUTURA Manuel utilisateur
Perma
Perma Classic 120 Manuel utilisateur
Perma
Perma NOVA 125 Manuel utilisateur
Perma
Perma STAR VARIO Guide rapide
Perma
Perma PRO LINE Manuel utilisateur
Perma
Perma FUTURA PLUS Manuel utilisateur
Perma
Perma Star Vario 250 Manuel utilisateur
Perma
Perma STAR VARIO Manuel utilisateur
Perma
Perma PRO 250 Manuel utilisateur
Perma
Perma FUTURA SF01 Manuel utilisateur
Perma
Perma STAR CONTROL Manuel utilisateur
Perma
Perma Classic 120 Manuel utilisateur
Perma
Perma STAR VARIO Manuel utilisateur
Perma
Perma STAR CONTROL Manuel utilisateur
Perma
Perma ECOSY 5 Guide rapide
Perma
Perma NOVA 125 Manuel utilisateur
Perma
Perma PRO 250 Manuel
Perma
Perma STAR VARIO Manuel utilisateur
Perma
Perma CLASSIC Series Manuel utilisateur
