PerkinElmer 200 Series Manuel utilisateur
Series 200 Oven Family
User’s Manual
Release History
Part Number Release Publication Date
09936398 CFebruary 2002
Any comments about the documentation for this product should be addressed to:
User Assistance
PerkinElmer
710 Bridgeport Avenue
Shelton, Connecticut 06484-4794
U.S.A.
Notices
The information contained in this document is subject to change without notice.
Except as specifically set forth in its terms and conditions of sale, PerkinElmer makes
no warranty of any kind with regard to this document, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose.
PerkinElmer shall not be liable for errors contained herein for incidental consequential
damages in connection with furnishing, performance or use of this material.
Copyright Information
This document contains proprietary information that is protected by copyright.
All rights are reserved. No part of this publication may be reproduced in any form
whatsoever or translated into any language without the prior, written permission of
PerkinElmer, Inc.
Copyright © 2003PerkinElmer, Inc.
Produced in the USA.
Trademarks
Registered names, trademarks, etc. used in this document, even when not specifically
marked as such, are protected by law.
PerkinElmer is a registered trademark of PerkinElmer, Inc.
Contents
-i-
Safety and Regulatory Information
Electromagnetic Compatibility (EMC).......................................... S-1
United States .......................................................................... S-1
Addresses ....................................................................................... S-1
Conventions used in this Manual.................................................. S-2
Instrument Symbols and Warnings .............................................. S-2
Symbols ................................................................................... S-2
Warnings on the Oven ............................................................ S-4
Electrical Warnings ....................................................................... S-6
Quality Control/Good Laboratory Practices.................................. S-7
Quality Control ....................................................................... S-7
Certificate of System Control ................................................. S-7
Instrument Performance Verification (IPV) .......................... S-7
Routine Inspection and Suitability Test ................................ S-7
Hazardous Chemicals.................................................................... S-8
Definitions in Warning for Hazardous Chemicals................. S-8
Temperature, Humidity and Environment................................... S-9
Storage Conditions.................................................................. S-9
Introduction
About the Manual.......................................................................... 1-1
Chapter Content ..................................................................... 1-1
Introducing the Series 200 Peltier Column Oven......................... 1-2
About the Oven Controls, Indicators, and Connections ........ 1-5
Warranty Exclusions and Limitations.......................................... 1-7
Maintenance .................................................................................. 1-7
Warnings and Precautions ............................................................ 1-7
Solvents................................................................................... 1-7
Buffers..................................................................................... 1-8
Corrosion................................................................................. 1-8
Air Bubbles ............................................................................. 1-8
Pressure Buildup .................................................................... 1-9
Specifications ................................................................................. 1-10
Contents
-ii -
Installing the Oven
Prepare Your Laboratory............................................................... 2-1
Required Air Quality .............................................................. 2-1
Sufficient Electrical Power..................................................... 2-2
Space Requirements ............................................................... 2-2
Solvents/Mobile Phase............................................................ 2-2
Unpack Your Series 200 Peltier Column Oven ............................ 2-3
Electrical Requirements and Settings .......................................... 2-3
Oven Power Cord and Fuses .................................................. 2-4
AC Line Cord .......................................................................... 2-5
Connect the Tubing ....................................................................... 2-6
Turn-On the Oven.......................................................................... 2-7
Using the Column Oven
Operating Overview....................................................................... 3-1
Operating Summary...................................................................... 3-2
Shutting Down the System ........................................................... 3-2
Appendix
Series 200 Accessory Control Installation Guide
Illustrations
-i-
Safety and Regulatory Information
Figure S-1. Location of side panel warning labels on
the Peltier column oven ................................................................ S-4
Figure S-2. Location of rear panel warning labels on
the Peltier column oven ................................................................ S-5
Introduction
Figure 1-1. Front View of the Series 200 Peltier column oven....... 1-3
Figure 1-2. Front view of the column chamber showing
the column inlet and outlet fittings.............................................. 1-4
Figure 1-3. Peltier Column Oven controller ................................... 1-5
Figure 1-4. Back panel of the Peltier Column Oven ...................... 1-6
Illustrations
-ii -
Installing the Oven
Figure 2-1. Rear panel of the oven .................................................. 2-4
Figure 2-2. Removing and installing fuses ..................................... 2-5
Figure 2-3. AC outlet configurations............................................... 2-6
Figure 2-4. Peltier Column Oven in a typical LC ssystem.............. 2-7
Using the Column Oven
Figure 3-1. Peltier Column Oven controller ................................... 3-2
Safety and Regulatory
Information
Electromagnetic Compatibility (EMC)
United States
This product is classified as a digital device used exclusively as industrial,
commercial, or medical test equipment. It is exempt from the technical
standards specified in Part 15 of the FCC Rules and Regulations, based on
Section 15.103 (c).
Addresses
To obtain assistance with the Series 200 Peltier Column Oven, contact the
Company as described below:
User Assistance
PerkinElmer
710 Bridgeport Avenue
Shelton, Connecticut 06484-4794
Tel: (800) 762-4000
Fax: (203) 762-6000
Supplies, accessories, and replacement parts can be ordered directly from
PerkinElmer using the eight-digit part numbers provided in the manual. To
place an order or ask for information, call your local PerkinElmer representative.
S-2Safety and Regulatory Information Conventions used in this Manual
Conventions used in this Manual
The following graphic symbols and special text formats are used in this
manual to identify important safety information:
A warning indicates an operation that could cause
personal injury if precautions are not followed.
A caution indicates an operation that could cause
instrument damage if precautions are not followed.
Note Notes emphasize significant information in a
procedure or description.
Instrument Symbols and Warnings
Symbols
The following three types of warning symbols appear on the instrument:
This symbol indicates an operation (or instrument
condition) that could cause personal injury if
precautions are not followed. This can be any type of
hazard.
When you see this symbol, refer to the safety pages in
the manual for further information.
Consulter les documents d’accompagnement.
This symbol indicates the danger of electric shock if
precautions are not followed due to the presence of high
voltage.
Attention. Risque de choc électrique.
Safety and Regulatory Information Instrument Symbols and Warnings S-3
This symbol indicates the danger of burns if
precautions are not followed due to the presence of
heat in this instrument area. This may also indicate a
hot surface that can be easily touched.
AVERTISSEMENT. Surface chaude.
The following additional graphic symbols used on the instrument:
S-4Safety and Regulatory Information Instrument Symbols and Warnings
Warnings on the Oven
The following warning labels are affixed to the side and rear panels of the
column oven: See Figures S-1 and S-2.
30.0
3 1.0
Figure S-1. Location of side panel warning labels on the Series 200 Peltier
Column Oven.
Table des matières
