Pepperl+Fuchs LVL-M3 Guide de référence

ISO9001

LVL-M3

Vibration Limit Switch

Brief Instructions

With regard to the supply of products, the current issue of the following document is applicable:

The General Terms of Delivery for Products and Services of the Electrical Industry, published by the Central

Association of the Electrical Industry (Zentralverband Elektrotechnik und Elektroindustrie (ZVEI) e.V.) in its most

recent version as well as the supplementary clause: "Expanded reservation of proprietorship"

Worldwide

Pepperl+Fuchs Group

Lilienthalstr. 200

68307 Mannheim

Germany

Phone: +49 621 776 - 0

E-mail: info@de.pepperl-fuchs.com

North American Headquarters

Pepperl+Fuchs Inc.

1600 Enterprise Parkway

Twinsburg, Ohio 44087

USA

Phone: +1 330 425-3555

E-mail: [email protected]

Asia Headquarters

Pepperl+Fuchs Pte. Ltd.

P+F Building

18 Ayer Rajah Crescent

Singapore 139942

Phone: +65 6779-9091

E-mail: [email protected]erl-fuchs.com

https://www.pepperl-fuchs.com

Vibration Limit Switch LVL-M3

Contents

2022-08

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Content of this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.3 Symbols Used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2 Basic Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.1 Requirements for Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.2 Designated Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.3 Workplace Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.4 Operational Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.5 Product Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3 Incoming Acceptance and Product Identification . . . . . . . . . . . . . . . . . . . . . . . 10

3.1 Incoming Acceptance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.2 Product Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.3 Storage and Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

4 Mounting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

4.1 Mounting Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

4.2 Mounting the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

4.3 Sliding Sleeves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

4.4 Post-Installation Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

5 Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5.1 Connection Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5.2 Connecting the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

5.3 Post-Connection Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6 Operation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

6.1 Overview of Operation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

7 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

7.1 Function Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

7.2 Switching on the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

7.3 Further Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

2022-08

Vibration Limit Switch LVL-M3

Contents

Vibration Limit Switch LVL-M3

Introduction

2022-08

1 Introduction

1.1 Content of this Document

This document contains information that you need in order to use your product throughout

the applicable stages of the product life cycle. These can include the following:

•Product identification

•Delivery, transport, and storage

•Mounting and installation

•Commissioning and operation

•Maintenance and repair

•Troubleshooting

•Dismounting

•Disposal

The documentation consists of the following parts:

•Datasheet – product overview

The datasheet contains the essential technical data for product selection.

•Technical information (TI) – planning aid

The document contains all the technical data on the device and provides an overview

of the accessories and other products that can be ordered for the device.

•Manual (BA) – complete information

The manual contains all information from incoming acceptance to disposal.

•Brief instructions (KA), present document – guide that takes you quickly to the 1st

measured value

The brief instructions contain all the essential information from incoming acceptance

to initial commissioning.

•Instruction manual (SI) – safety-relevant document

Depending on the approval, the required instruction manuals are supplied

with the device.

Additionally, the following parts may belong to the documentation, if applicable:

•EU-type examination certificate

•EU declaration of conformity

•Attestation of conformity

•Certificates

•Control drawings

•Functional safety manual

•Additional documents

Note

This document does not substitute the instruction manual.

Note

For full information on the product, refer to the instruction manual and further documentation

on the Internet at www.pepperl-fuchs.com.

Note

For specific device information such as the year of construction, scan the QR code

on the device. As an alternative, enter the serial number in the serial number search

at www.pepperl-fuchs.com.

2022-08

Vibration Limit Switch LVL-M3

Introduction

1.2 Safety Information

Target Group, Personnel

Responsibility for planning, assembly, commissioning, operation, maintenance,

and dismounting lies with the plant operator.

Only appropriately trained and qualified personnel may carry out mounting, installation,

commissioning, operation, maintenance, and dismounting of the product. The personnel must

have read and understood the instruction manual and the further documentation.

Prior to using the product make yourself familiar with it. Read the document carefully.

1.3 Symbols Used

This document contains symbols for the identification of warning messages and

of informative messages.

Warning Messages

You will find warning messages, whenever dangers may arise from your actions.

It is mandatory that you observe these warning messages for your personal safety and in order

to avoid property damage.

Depending on the risk level, the warning messages are displayed in descending order

as follows:

Danger!

This symbol indicates an imminent danger.

Non-observance will result in personal injury or death.

Warning!

This symbol indicates a possible fault or danger.

Non-observance may cause personal injury or serious property damage.

Caution!

This symbol indicates a possible fault.

Non-observance could interrupt the device and any connected systems and plants,

or result in their complete failure.

Vibration Limit Switch LVL-M3

Introduction

2022-08

Informative Symbols

Action

This symbol indicates a paragraph with instructions. You are prompted to perform an action

or a sequence of actions.

▶ Reference to another section or to further documentation

Permitted

Procedures, processes or actions that are permitted.

Forbidden

Procedures, processes or actions that are forbidden.

Electrical Symbols

Ground connection

Grounded clamp, which is grounded via a grounding system.

Protective earth (PE)

Ground terminals, which must be grounded prior to establishing any other connections.

The ground terminals are located on the inside and outside of the device.

Tool Symbols

Flat-blade screwdriver

Allen key

Open-ended wrench

Symbols in Graphics

1, 2, 3 ... Item numbers

A, B, C, ... Views

Explosion-hazardous area

Non-explosion-hazardous area

Note

This symbol brings important information to your attention.

)

2022-08

Vibration Limit Switch LVL-M3

Basic Safety Instructions

2 Basic Safety Instructions

2.1 Requirements for Personnel

The personnel must fulfill the following requirements to carry out the necessary tasks,

e. g. commissioning and maintenance:

•Trained, qualified specialists must have a relevant qualification for the specific function

•and task

•Are authorized by the plant owner/operator

•Are familiar with federal/national regulations

•Must have read and understood the instructions in the manual

and supplementary documentation

•Follow instructions and comply with conditions

2.2 Designated Use

•Only use the device for liquids.

•Improper use can pose hazards.

•Ensure that the device is free of defects while it is in operation.

•Use the device only for media to which the process-wetted materials have an adequate

level of resistance.

•Do not exceed or drop below the limit values for the device, see manual

and technical information TI01402O/98/EN.

2.2.1 Incorrect Use

The manufacturer is not liable for damage caused by improper or non-designated use.

Residual Risks

Due to heat transfer from the process, the temperature of the electronics housing

and the assemblies contained therein may rise to 80 °C (176 °F) during operation.

Danger of burns from contact with surfaces!

•If necessary, ensure protection against contact to prevent burns.

2.3 Workplace Safety

For work on and with the device:

•Wear the required personal protective equipment according to federal/national

regulations.

Vibration Limit Switch LVL-M3

Basic Safety Instructions

2022-08

2.4 Operational Safety

Risk of injury!

•Operate the device only if it is in proper technical condition, free from errors and faults.

•The operator is responsible for ensuring failure-free operation of the device.

Modifications to the Device

Unauthorized modifications to the device are not permitted and can lead

to unforeseeable dangers.

•If, despite this, modifications are required, consult with Pepperl+Fuchs.

Repair

To ensure continued operational safety and reliability:

•Only perform repair work on the device if this is expressly permitted.

•Observe federal/national regulations pertaining to the repair of an electrical device.

•Use original spare parts and accessories from Pepperl+Fuchs only.

Hazardous Area

To eliminate danger to persons or the facility when the device is used in the hazardous area

(e. g. explosion protection):

•Check the nameplate to verify whether the ordered device can be used for the intended

purpose in the hazardous area.

•Observe the specifications in the separate supplementary documentation that

is an integral part of this manual.

2.5 Product Safety

This device is designed in accordance with good engineering practice to meet state-of-the-art

safety requirements, has been tested, and left the factory in a condition in which it is safe to

operate.

The device meets general safety standards and legal requirements. It also complies

with the EU directives listed in the device-specific EU Declaration of Conformity.

Pepperl+Fuchs confirms this by affixing the CE mark to the device.

2022-08

Vibration Limit Switch LVL-M3

Incoming Acceptance and Product Identification

3 Incoming Acceptance and Product Identification

3.1 Incoming Acceptance

Check the following during goods acceptance:

□Are the order codes on the delivery note and the product sticker identical?

□Are the goods undamaged?

□Do the nameplate data match the ordering information on the delivery note?

□If required (see nameplate): Are the Safety Instructions, e. g. SI, provided?

3.2 Product Identification

The device can be identified in the following ways:

•Nameplate data

•Extended order code with breakdown of the device features on the delivery note

3.2.1 Nameplate

The information that is required by law and is relevant to the device is shown

on the nameplate, e. g.:

•Manufacturer identification

•Order number, extended order code, serial number

•Technical data, degree of protection

•Firmware version, hardware version

•Approval-related information, reference to instruction manuals (SI)

•DataMatrix code (information about the device)

3.2.2 Electronic Insert

3.2.3 Manufacturer Address

Place of manufacture: See nameplate.

Note

If one of these conditions is not met, please contact the manufacturer's sales office.

Note

Identify the electronic insert via the order code on the nameplate.

Pepperl+Fuchs Group

Lilienthalstraße 200, 68307 Mannheim, Germany

Internet: www.pepperl-fuchs.com

Autres manuels pour LVL-M3

Table des matières

Autres manuels Pepperl+Fuchs Instrument de mesure

Pepperl+Fuchs

Pepperl+Fuchs KFA5-DWB-Ex1.D Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs LGC Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs WS-UC F406-B41 Series Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs Pulscon LTC50 HART Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs PMI360DV-F130-IU2E0-V15 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs PCV100-F200-B17-V1D-6011 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs IMUF99 B20 Series Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs UDC-18GMA-400-3E2 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs IMUF99 B16 Series Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs VBA-2E-KE4-ENC-S Guide de l'utilisateur

Pepperl+Fuchs

Pepperl+Fuchs LGM Series Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs TC-6A-V Mode d’emploi

Pepperl+Fuchs

Pepperl+Fuchs LVL-Z120 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs LGM Series Guide de référence

Pepperl+Fuchs

Pepperl+Fuchs HART LUC-M Series Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs ecom Ex-MP4 a Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs F2D0-TI-Ex8.FF Series Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs PMI360D-F130-IE8-V15 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs PMI15V-F166 IO Series Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs KT-LED-24-PT100-24VDC Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs VAS-2A1L-K31 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs PMI360D-F130-IE8-V15-Y205400 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs PMI360DV-F130-IU2E2-V15 Manuel utilisateur

Pepperl+Fuchs

Pepperl+Fuchs AS-i Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur