PEP Modular Computers VMP2 Manuel utilisateur

VMP2

Power PC-based CPU Board

for VME Applications

Manual ID: 24855, Rev. Index 02

November 2002

The product described in this manual is

in compliance with all applied CE stan-

dards.

StockCheck.com

Preface VMP2

Revision History

Imprint

reserved. This manual may not be copied, photocopied, repro-

duced, translated or converted to any electronic or machine-

readable form in whole or in part without prior written approval of

PEP Modular Computers GmbH.

This manual was realized by: TPD/Engineering, PEP Modular Computers GmbH.

Manual/Product Title: VMP2

Manual ID Number: 24855

Rev.

Index Brief Description of Changes Board Index Date of

Issue

01 Initial Issue 00 Oct. 02

02 Chapter 5 replaced (new bootstrap loader) 00 Nov. 02

Disclaimer:

PEP Modular Computers GmbH rejects any liability for the cor-

rectnesss and completeness of this manual as well as its suitabil-

ity for any particular purpose.

StockCheck.com

VMP2 Preface

Table of Contents

Revision History .................................................................................................. 0 - 2

Imprint ................................................................................................................. 0 - 2

Table of Contents .................................................................................................0 - 3

List of Tables ........................................................................................................0 - 9

List of Figures .................................................................................................... 0 - 11

Proprietary Note ................................................................................................ 0 - 15

Trademarks ....................................................................................................... 0 - 15

Explanation of Symbols .................................................................................... 0 - 16

For Your Safety ................................................................................................. 0 - 17

Two Year Warranty ........................................................................................... 0 - 19

Chapter 1

1. Introduction ................................................................................................... 1 - 3

1.1 Board Introduction .................................................................................. 1 - 4

1.2 Board Overview ..................................................................................... 1 - 5

1.3 VMP2 Main Specifications ..................................................................... 1 - 6

1.4 Applied Standards .................................................................................. 1 - 8

1.4.1 CE Compliance ................................................................................ 1 - 8

1.4.2 Mechanical Compliance ................................................................... 1 - 8

1.4.3 Environmental Tests ........................................................................ 1 - 8

1.5 Related Publications .............................................................................. 1 - 8

1.5.1 VME Systems/Boards ...................................................................... 1 - 8

1.5.2 PMC Add-on Modules/Carriers ........................................................ 1 - 8

Chapter 2

2. Functional Description .................................................................................. 2 - 3

2.1 Functional Block Diagram ...................................................................... 2 - 3

2.2 Front Panels ........................................................................................... 2 - 4

2.3 Board Layout .......................................................................................... 2 - 5

2.4 Main Features ........................................................................................ 2 - 6

StockCheck.com

Preface VMP2

2.4.1 CPU .................................................................................................. 2 - 6

2.4.1.1 MPC8245 (Kahlua II) Features ................................................... 2 - 6

2.4.2 Memory ............................................................................................. 2 - 8

2.4.2.1 System Memory (DRAM) ............................................................ 2 - 8

2.4.2.2 Flash ........................................................................................... 2 - 8

2.4.2.3 EEPROM .................................................................................... 2 - 8

2.4.2.4 Memory Expansion Socket (DIL600) .......................................... 2 - 8

2.5 Board Interfaces ..................................................................................... 2 - 9

2.5.1 VME Interface and Connector Pinout ............................................... 2 - 9

2.5.1.1 VME Bus Connector CON1 Pinout ........................................... 2 - 10

2.5.2 Ethernet Interface and Connector Pinout ....................................... 2 - 11

2.5.2.1 Ethernet Connector CON8 Pinout ............................................ 2 - 11

2.5.3 Serial Interfaces and ConnectorPinout ........................................... 2 - 12

2.5.3.1 Pinouts of Serial Ports (RJ45 Connectors) ............................... 2 - 12

2.5.4 PCI Expansion Interface and Connector Pinout ............................. 2 - 13

2.5.4.1 PCI Expansion Connector (CON11) Pinout .............................. 2 - 14

2.5.5 Serial Interface Expansion Connector and Pinout .......................... 2 - 16

2.5.5.1 Serial Interface Expansion Connector CON3 Pinout ................ 2 - 16

2.5.6 Memory Expansion Interface .......................................................... 2 - 16

2.5.7 DEBUG Interface and Connector Pinout ........................................ 2 - 17

2.5.7.1 Debug Connector CON10 Pinout ............................................. 2 - 17

2.5.8 Digital Temperature Sensor (LM75) ............................................... 2 - 17

2.6 Special Board Features ........................................................................ 2 - 18

2.6.1 Watchdog Timer ............................................................................. 2 - 18

2.6.2 RTC (STC M41T56) ....................................................................... 2 - 18

2.6.3 Reset/Abort .................................................................................... 2 - 18

2.6.4 Front Panel LED’s .......................................................................... 2 - 19

Chapter 3

3. Installation ..................................................................................................... 3 - 3

3.1 Board Installation .................................................................................... 3 - 3

3.1.1 Front Panel I/O Connectors .............................................................. 3 - 4

StockCheck.com

VMP2 Preface

Chapter 4

4. Configuration ................................................................................................ 4 - 3

4.1 Jumper Settings ..................................................................................... 4 - 3

4.1.1 Bootstrap Loader / Socket Jumper J1 .............................................. 4 - 3

4.1.2 RTC (Real-time clock) Calibration Output (J2) ................................ 4 - 3

4.1.3 Resistor Setting for Non-standard Socket Devices .......................... 4 - 4

4.1.4 RS485 Termination (Onboard Interface Only) ................................. 4 - 4

4.2 Pinouts ................................................................................................... 4 - 5

4.2.1 Flash Socket Type Selection ........................................................... 4 - 5

4.2.1.1 Socket Device Selection (Memory Expansion Socket IC8) ........ 4 - 5

4.2.2 Serial Interface Expansion Connector (CON3) ................................ 4 - 6

4.3 Board Address Map ............................................................................... 4 - 7

4.3.1 Address Map Overview .................................................................... 4 - 7

4.3.2 VME Address Area .......................................................................... 4 - 8

4.3.3 Onboard Device Addresses ............................................................. 4 - 9

4.3.4 Special Registers Overview ........................................................... 4 - 10

4.3.4.1 Board Control Registers ........................................................... 4 - 10

4.3.4.2 Board ID Register ..................................................................... 4 - 10

4.3.4.3 Software Compatibility ID ......................................................... 4 - 11

4.3.4.4 Memory Configuration Register ............................................... 4 - 12

4.3.4.5 Flash Bank Select Register ...................................................... 4 - 12

4.3.4.6 Watchdog Control Register ...................................................... 4 - 13

4.3.4.7 Control Register ....................................................................... 4 - 14

4.3.4.8 Event Register .......................................................................... 4 - 15

4.3.4.9 Board / Logic Revision Register ............................................... 4 - 16

4.3.4.10 UART A / Registers ................................................................ 4 - 17

4.3.4.11 UART B / Registers ................................................................ 4 - 18

4.3.5 IRQ Routing ................................................................................... 4 - 19

4.3.6 Real-time Clock .............................................................................. 4 - 20

4.3.7 EEPROM ....................................................................................... 4 - 21

4.3.8 Digital Temperature Sensor ........................................................... 4 - 21

StockCheck.com

Preface VMP2

Chapter 5

5. NetBootLoader .............................................................................................5 - 3

5.1 General Operation ...................................................................................5 - 3

5.2 NetBootLoader Interfaces ........................................................................5 - 3

5.2.1 ABT (Abort) Switch ..........................................................................5 - 4

5.2.2 TERM Serial Interface .....................................................................5 - 4

5.2.3 SER0 Serial Interface ......................................................................5 - 4

5.2.4 Ethernet Interface ............................................................................5 - 4

5.3 NetBootLoader Functions ........................................................................5 - 4

5.3.1 NetBootLoader Control ...................................................................5 - 5

5.3.2 System Status Monitoring ...............................................................5 - 5

5.3.3 ftp Server Access ............................................................................5 - 6

5.3.4 FLASH Operation ............................................................................5 - 6

5.3.5 Motorola S-Records ........................................................................5 - 6

5.4 Operating the NetBootLoader ..................................................................5 - 7

5.4.1 Initial Setup .....................................................................................5 - 7

5.4.2 Accessing the NetBootLoader .........................................................5 - 7

5.4.3 NetBootLoader Configuration ..........................................................5 - 8

5.4.3.1 BW ..............................................................................................5 - 8

5.4.3.2 NET .............................................................................................5 - 8

5.4.3.3 PASSWD .....................................................................................5 - 8

5.4.3.4 PF ...............................................................................................5 - 9

5.4.4 telnet Login ......................................................................................5 - 9

5.4.5 FLASH Operations ..........................................................................5 - 9

5.4.5.1 FLASH Offsets ............................................................................5 - 9

5.4.5.2 Programming an Application .....................................................5 - 10

5.4.5.3 ftp Server Access ......................................................................5 - 10

5.4.5.4 Motorola S-Records ..................................................................5 - 10

5.4.6 Updating the NetBootLoader .........................................................5 - 11

5.4.6.1 Updating With an Image Loaded Via an ftp Server ...................5 - 11

5.4.6.2 Updating Via a Separate DIL FLASH ........................................5 - 11

StockCheck.com

VMP2 Preface

5.4.7 Uploading a FLASH Area .............................................................5 - 12

5.5 Plug and Play ........................................................................................5 - 12

5.6 Porting an Operating System to the CPU Board ...................................5 - 12

5.7 Commands ............................................................................................5 - 13

Annex A

A. VMP1-IO1 Module (Optional) ....................................................................... A - 3

A.1 Overview ................................................................................................ A - 3

A.2 Board Interfaces ..................................................................................... A - 4

A.3 Board Layout .......................................................................................... A - 5

A.4 VMP1-IO1 Front Panel ........................................................................... A - 6

A.5 Technical Specifications ........................................................................ A - 7

A.6 Board Installation ................................................................................... A - 8

A.7 Pinouts ................................................................................................. A - 10

A.7.1 Jn1 (CON4) Pin Assignment .......................................................... A - 10

A.7.2 Jn2 (CON5) Pin Assignment .......................................................... A - 11

A.8 Jumper Setting ..................................................................................... A - 12

Annex B

B. VMP1-Post (Optional) ................................................................................... B - 3

Annex C

C. Optoisolation RS485 Module (Optional) ....................................................... C - 3

Annex D

D. JTAG Subsystem .......................................................................................... D - 3

StockCheck.com

Preface VMP2

Annex E

E. CP320-TR1 (Optional) ................................................................................. E - 3

Annex E

Annex F

F. CP320-TR2 (Optional) ................................................................................. F - 3

Annex G

G. PMC-HDD1 Module (Optional) ..................................................................... G - 3

StockCheck.com

VMP2 Preface

List of Tables

1-1 VMP2 Main Specifications...........................................................................1 - 6

2-1 Pin Assignment J1/P1 VME Connector CON1..........................................2 - 10

2-2 Ethernet RJ45 Connector CON8 Pin Assignment..................................... 2 - 11

2-3 Serial Port Connectors CON6 and CON7 Pin Assignment .......................2 - 12

2-4 PCI Expansion Connector Pinout..............................................................2 - 14

2-5 Serial Interface Expansion Connector (CON3) Pinout...............................2 - 16

2-6 Debug Interface Connector (CON10) Pinout.............................................2 - 17

4-1 Bootstrap Loader / Socket Jumper J1 Settings ...........................................4 - 3

4-2 Resistor Setting for Various Non-standard Socket Devices ........................4 - 4

4-3 Jumper Settings for RS485 Termination......................................................4 - 4

4-4 DIL 32 Pinout for Various Devices...............................................................4 - 5

4-5 RS Expansion Connector Pinout.................................................................4 - 6

4-6 Board Control Registers............................................................................4 - 10

4-7 Board ID Register......................................................................................4 - 10

4-8 Software Compatibility ID .......................................................................... 4 - 11

4-9 Memory Configuration Register.................................................................4 - 12

4-10 Flash Bank Select Register .......................................................................4 - 12

4-11 Watchdog Control Register........................................................................4 - 13

4-12 Control Register.........................................................................................4 - 14

4-13 Event Register...........................................................................................4 - 15

4-14 Board Logic / Revision Register ................................................................4 - 16

4-15 General Register Set (THR/RHR, IER/ISR, MCR/MSR, LCR/LSR, SPR).4 - 17

4-16 Baud Rate Register Set (DLL/DLM)..........................................................4 - 17

4-17 Enhanced Register Set..............................................................................4 - 17

4-18 General Register Set (THR/RHR, IER/ISR, MCR/MSR, LCR/LSR, SPR).4 - 18

4-19 Baud Rate Register Set (DLL/DLM)..........................................................4 - 18

4-20 Enhanced Register Set..............................................................................4 - 18

4-21 Serial IRQ’s................................................................................................4 - 19

4-22 Register Map RTC M41T56.......................................................................4 - 20

5-1 NetBootLoader Control Commands...........................................................5 - 5

5-2 System Status Monitoring Commands.......................................................5 - 5

5-3 ftp Server Commands................................................................................5 - 6

StockCheck.com

Preface VMP2

5-4 FLASH Operation Commands....................................................................5 - 6

5-5 Motorola S-Records Commands................................................................5 - 6

A-1 VMP1-IO1 Specifications............................................................................A - 7

A-2 Jn1, 32-bit PCI .......................................................................................... A - 10

A-3 Jn2, 32-bit PCI ...........................................................................................A - 11

A-4 IO1 Jumper Settings for Different Module Positions.................................A - 12

E-1 Duplex Configuration...................................................................................E - 3

E-2 Serial Port Pinout........................................................................................E - 3

E-3 CP320-TR1 Jumper Settings......................................................................E - 4

F-1 Serial Port Pinout........................................................................................ F - 4

G-1 Pinout of the PMC Connectors....................................................................G - 4

G-2 IDE Hard Disk Drive Connector Pinout.......................................................G - 5

StockCheck.com

Table des matières

Autres manuels PEP Modular Computers Matériel informatique

PEP Modular Computers

PEP Modular Computers CP302 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur