PELIOS 2.8 Manuel utilisateur
Pelios 2.8
1
E
C
Appearance
B
A
D
A. Charging Contactor B. Touch/Tap Area
C. Microphone D. Charging Port
E. Charging Indicator
2
Product Specification:
Protocol Support: SBC/AAC/FHSS
Sensitivity: 120±3dB
Frequency Response: 20-20000Hz
Output: 5V/0.3A
Power: 1.5W
Model: 2.8
Bluetooth Version: V5.0
Input: DC 5V
Capacity: 3.7V/35mAh
Working Time: 180 minutes
Charging Time: 40-50 minutes
3
2. Power off
3.Bluetooth pairing
1.Power on
Products Use:
When you open the Earbud charging/carry case, the earbuds should power on
automatically and will connect to your device if previously paired. If not previously
paired, you can pair to the Earbuds by accessing Bluetooth (more on that below).
The Earbuds will automatically power off when you place them back inside the
charging case and the close the case's lid. If your Earbuds are outside of the
case and have no devices to automatically connect to, they will automatically turn
off after 3 minutes.
When using the Pelios Earbuds for the first time, they will automatically go into
pairing mode when powered on. Open up the Bluetooth menu on the device you
wish to pair with your Earbuds and select "Pelios" from the Bluetooth list. The
Earbuds should connect within 3 seconds, with an indication sound playing to
denote a successful pairing.
4
4. Connect with iOS
1. Open Bluetooth
IOS system Bluetooth headset operating instructions
IOS system
2. Open the charging case lid.
The light on the case will stay
on for up to 8 seconds.
4. Long press the small circular
button located on the back of
the Earbud charging case.
5. Click 'Done' on your phone
to complete the connection
and use the Earbuds.
3. A connection prompt
will pop up on your phone.
Click Connect.
Pelios
Pelios
5
6. If you, take out one Earbud from the charging case, you can
use your iPhone to view the battery levels for both of your Earbuds,
as well as the charging case.
7. When you take out both Earbuds, you can
view their collective remaining battery percentage
Left and right ears
Charging bin
Power display
Instructions
Pelios
Pelios
6
Wireless charging diagram
6. Phone call mode
5. Charging Instructions:
The Pelios Earbuds charging case can be charged using either a Qi-certified
wireless charger or with a Lightning cable. When you are charging the Earbuds
charging case itself, it will light up with an orange light for 8 seconds to denote
that it is charging. When fully charged, a green light will shine for 8 seconds on
the charging case. When the charging case is topping up the battery of your
Earbuds, it will initially light up green for 3 seconds.
When a call comes in, your Earbuds will make a brief notification sound, then list
the phone number that's currently calling.
• Double-press the left or right Earbud to answer the call
• During a call, double-press the left or right Earbud to hang up.
• Long press the left or right Earbud for 2 seconds to reject an incoming call.
7
7. How to use the earphone?
Customize the double-press functionality on your Earbuds by going to Settings,
Bluetooth, "Pelios", then click on the "i" icon on the right-hand side of the screen
to choose specific functions for both Earbuds.
7.1. Android System
*Double press : Play/Pause, Answer/Hang up
*Triple press: Left earphone to skip back, right earphone to skip forward
*Long press 3 seconds: Activate voice assistance
7.2 iOS System
Table des matières
Autres manuels PELIOS Casque audio
