Peerless-AV LCH-100 Mode d’emploi

2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerless-av.com

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

Installation and Assembly - Monitor Desktop Stand Models: LCH-100

LCH-100

IMPORTANT! Read entire instruction sheet before you start installation and assembly.

NOTE: You may not use all hardware provided.

NOTE: Some parts may not appear exactly as illustrated.

LOCK BALL

IMPORTANT! The product is made to support screens with a Vesa compliant hole pattern.

For safe mounting, mounting screws must turn at least three times in the screen inserts.

SPRING LOADED PRODUCT

• Only release lock ball when screen is

installed. Do not place chin or object

above pole when releasing lock ball.

WARNING

LCH-100

Description Qty. Part #

telescopic pedestal 1 091-1088

Bpivot head 1 091-1090

Cmounting base 1 091-1089

Dadapter plate 1 095-1100

EM4 x 8mm countersink screw 4520-1795

FM4 x 10mm phillips screw 4520-1796

Gwood screw #14 x 1 4510-9159

Hhex bolt 1 -

Ihex nut 1 -

JM4 x 0.7mm nut 4 530-1082

Kpressure plate 1 -

Lnylon washer 1 540-1636

M4mm allen wrench 2 560-0072

N3mm allen wrench 1 560-0073

Parts List

MAX Load Capacity:

25 lb (11.4KG)

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

2 of 5

DESKTOP

Insert telescopic pedestal (A) into mounting base (C).

Tighten set screws where shown with 3 mm allen wrench (N).

Mark hole on desktop for positioning mount.

Drill one 1/2" dia. hole through desktop. Attach

mounting base (C) to desktop using hex bolt (H),

pressure plate (K), and hex nut (I). Tighten nut

using proper sized wrench.

Important! Mount is to be installed onto desktops

3/4" to 1-5/8" thick only! For thicker mounting

surfaces, you may have to provide your own

hardware.

There are two methods of installation. Follow step 1 for installation using hex bolt and pressure plate or

step 2 using four wood screws. Use four holes on mounting base (C) to mark holes

on desktop for positioning mount. Drill four 3/16"

dia. holes through desktop. Attach mounting base

SET SCREWS

• Mount must be installed on wood and/or wood composition surfaces of at least 3/4" thick. However, the installer

must ensure that the mounting surface will safely hold the combined weight of the mount and the screen. See other

mounting requirements below.

CAUTION

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

3 of 5

GENERIC LCD SCREEN

To install to a VESA 75 mm standard LCD monitor,

attach pivot head (B) to back of LCD monitor using four

M4 x 10 mm phillips screws (F) as shown.

Skip to step 6.

GENERIC LCD SCREEN

To install to a VESA 100 mm standard LCD monitor, attach

adapter plate (D) to pivot head (B) using four M4 x 8 mm

phillips screws (E) and four M4 x 0.7mm nuts (J) as shown in

detail 1. Attach pivot head (B) to back of LCD monitor using

four M4 x 10 mm phillips screws (F) as shown in detail 2.

DETAIL 1 DETAIL 2

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

4 of 5

Place nylon washer (L) and pivot head (B) on top pin

of telescopic pedestal (A) as shown. To restrict rotation

of LCD screen to 90°, lineup rear set screw with slot

and tighten where shown in detail 3 using 3 mm allen

wrench (N). To completely restrict rotation, tighten rear

set screw using 3 mm allen wrench (N).

SET SCREWS

SLOT

REAR SET

SCREW

DETAIL 3

Turn tube nut counterclockwise to loosen. Gently hold pivot head

(B) down with one hand, and gently press on lock ball with the other

hand. Lock ball must be inserted into outer tube to obtain up and down

movement. Do not insert lock ball all the way into the inner tube.

Adjust to desired height making sure to locate lock ball into one the

four holes as shown.

NOTE: Setting the lock ball in the lowermost hole requires the removal

of the inner white plastic ring. To do this set the lock back in a

different hole. Slowly unscrew the tube nut until it comes off threads.

Remove the white plastic ring inside the tube nut. Retighten the tube

nut. Adjust the height until the lock ball reaches the lowermost hole.

TUBE NUT LOCK BALL

BACK VIEW

INNER TUBE

OUTER TUBE

ISSUED: 09-30-02 SHEET #: 090-9085-6 07-23-13

5 of 5

Route cord(s) through cable clips for cord management.

Note: Ensure the cords have enough slack for proper clearance

and function.

Turn screen clockwise by hand for landscape or portrait

orientation.

CABLE

CLIPS MONITOR

CORD(S)

For tilt adjustment use one 4 mm allen wrench (M) to

hold socket screw in place and the other 4 mm allen

wrench (M) to turn the socket screw clockwise to tighten

and counterclockwise to loosen as shown.

MSOCKET

SCREW

All other brand and product names are trademarks or registered trademarks of their respective owners.

Table des matières

Autres manuels peerless-AV Support et étagère

peerless-AV

peerless-AV SMART MOUNT LT SAL746 Manuel utilisateur

peerless-AV

peerless-AV PLCM-1 Manuel utilisateur

peerless-AV

peerless-AV DS-LEDZRD Series Manuel utilisateur

peerless-AV

peerless-AV MOD-CPF2 Manuel utilisateur

peerless-AV

peerless-AV LCW620AD Mode d’emploi

peerless-AV

peerless-AV DS-LEDLSAA-5X5 Manuel utilisateur

peerless-AV

peerless-AV SUA740P Manuel utilisateur

peerless-AV

peerless-AV ACCXT201 Mode d’emploi

peerless-AV

peerless-AV AEC Manuel utilisateur

peerless-AV

peerless-AV FS-MIS38426 Manuel utilisateur

peerless-AV

peerless-AV MOD-FPMD2 Manuel utilisateur

peerless-AV

peerless-AV DS-C560-1X3 Manuel utilisateur

peerless-AV

peerless-AV LCV-100 Mode d’emploi

peerless-AV

peerless-AV DS-MBZ942L-2X1 Manuel utilisateur

peerless-AV

peerless-AV MOD-CPI Manuel utilisateur

peerless-AV

peerless-AV EXT Manuel utilisateur

peerless-AV

peerless-AV SPL746 Manuel utilisateur

peerless-AV

peerless-AV YBA4X4 Manuel utilisateur

peerless-AV

peerless-AV ACC 050 Manuel utilisateur

peerless-AV

peerless-AV SmartMount XT SFX650 Manuel utilisateur

peerless-AV

peerless-AV dvLED Series Manuel utilisateur

peerless-AV

peerless-AV RMI2C Manuel utilisateur

peerless-AV

peerless-AV DS-LEDLSCB Series Manuel utilisateur

peerless-AV

peerless-AV SMARTMOUNT SA724P Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur

peerless-AV LCH-100 Mode d’emploi

Manuels Support et étagère populaires d'autres marques