Peco T180 Manuel utilisateur
T180
PROGRAMMABLE THERMOSTAT
OWNER’S MANUAL
TA/TB180
CONTENTS Page
General .............................................................................................................................. 4
Front Panel Reference ...................................................................................................... 5
Display Reference ............................................................................................................. 6
Saving Changes ................................................................................................................ 10
UP and DOWN Button Operation ...................................................................................... 11
System Button Operation .................................................................................................. 11
Fan Button Operation ........................................................................................................ 13
Program Button Operation ................................................................................................. 14
Function Overview ................................................................................................ 14
Setting the Clock and Day ...................................................................................... 15
Setting the Temperature Display ............................................................................. 15
Programming Time & Temperature Settings ............................................................. 16
Factory Program ................................................................................... 16
Custom Program ................................................................................... 17
Copy Feature ........................................................................ 18
Time & Temperature Programming Example ............................ 19
Overriding the Program ......................................................................................... 20
Setting up a Temporary Hold .................................................................. 20
Setting up a Permanent Hold .................................................................. 21
Turning off a Hold.................................................................................... 21
Custom Program Worksheet ............................................................................................. 22
PAGE 3
CAUTION!
• FOLLOW TA/TB180 INSTALLATION INSTRUCTIONS BEFORE PROCEEDING.
• READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO OPERATE THIS
THERMOSTAT.
• Retain these instructions for future reference. This product, when installed, will be part of an
engineered system whose specications and performance characteristics are not designed or
controlled by PECO.
• If at any time your system does not operate properly, contact a qualied service person.
• Care should be used to avoid static discharge to the thermostat.
IMPORTANT NOTE
This thermostat was shipped with factory-default settings. Your thermostat’s installer may have
congured the thermostat differently from the factory-default settings, and may have modied or
disabled certain features. Contact the installer or a service technician if you have questions about
the thermostat’s conguration.
PAGE 4
!
GENERAL
The T180 Thermostat is a wall-mounted digital control for 2 or 4 pipe fan coil applications. The
thermostat can be set for 7-day, 5/2-day, 5/1/1-day, or 1-day programmable operation. Different
heating and cooling setpoints and times are programmable for 4 time periods per day. The
thermostat can also be set to nonprogrammable (manual) operation. The T180 Thermostat has
connections for occupancy sensors and door switches, to automatically activate the thermostat’s
setback mode.
The T180 Thermostat does not need batteries to store user-congured settings in memory. During
power loss its internal memory saves the settings and clock for unlimited time.
PAGE 5
12
3
4
FRONT PANEL REFERENCE
Liquid Crystal Display with a blue backlight
UP ▲and DOWN ▼Buttons
SYSTEM Button
FAN Button
PROGRAM Button
PAGE 6
SYSTEM FAN PROGRAM
5
1
2
3
4
5
DISPLAY REFERENCE
1
2
3
4
5
6
7
8
PAGE 7
System Mode Display
HEAT – indicates the system is in heating mode.
COOL – indicates the system is in cooling mode.
AUTO – indicates the system will automatically changeover between heating and cooling modes
as the room temperature varies.
OFF – turns off the entire system.
SETBACK – indicates the heating or cooling system is operating in setback mode. Setback mode
is an energy saving feature that can be either manually activated by the thermostat’s user, or
automatically activated by an occupancy sensor or door switch.
Temperature Display
Default display: Digits display the current room temperature.
During programming: Digits are used to set the desired temperatures.
Time and Day Display
Default display: Digits indicate the current time, and day abbreviations indicate the current day.
During programming: Digits and days are used to program time periods.
CLOCK – lights up during programming when the clock is being set.
24Hr – lights up during programming to indicate time will be displayed in 24-hour clock format.
AM / PM – indicates 12-hour clock format.
1
2
3
PAGE 8
DISPLAY REFERENCE (cont.)
Programming Commands
SET – enters thermostat into custom program mode which allows you to specify a unique times
and temperatures for a particular day or group of days.
COPY – simplies programming by allowing you to copy all of an individual day’s settings to
another day or group of day.
DFLT – restores the thermostat to the factory program.
Time Period Indicators
WAKE, DAY, EVE, and SLEEP are the names given to the four time periods per day. Each time
period has its own unique setpoint temperatures.
Fan Operation Indicators
FAN – “FAN” will be always be lit in conjunction with “ON” or “AUTO”.
ON – indicates constant, continuous fan operation.
Auto – indicates fan is only on with heating or cooling demand.
Hi – indicates high speed fan; always lit in conjunction with “ON” or “AUTO”.
M – indicates medium speed fan; always lit in conjunction with “ON” or “AUTO”.
Lo – indicates low speed fan; always lit in conjunction with “ON” or “AUTO”.
4
5
6
PAGE 9
Program Override Commands
HOLD – indicates thermostat is in manual operation. (Programmed settings are off, but not lost.)
HOLD HRS – during programming, lights up in conjunction with clock digits; allows program to be
put on hold for up to 24 hours.
HOLD DAYS – during programming, lights up in conjunction with the clock digits; allows program
to be put on hold for up to 99 days.
HOLD ON – indicates thermostat is in permanent manual operation.
OFF – turns off the hold and resumes programmed settings.
Service Indicator
The wrench symbol is displayed when there is a temperature sensor error or condensate overow
error. It indicates there is an open or a short connection to the sensor switch. When this occurs,
the thermostat will disable all outputs and illuminate the wrench symbol. A service technician
should be called to determine the cause of the error.
7
8
PAGE 10
SAVING CHANGES
As you navigate your thermostat, be aware of the thermostat’s save and exit protocol:
• The thermostat automatically saves all the changes you make, as you make them.
• When you are in the SYSTEM or FAN menus:
– If you push a button that is not applicable to the current menu, all changes are saved and
the thermostat goes to the menu associated with the button that was pushed.
– If the thermostat is idle for ve seconds, the thermostat times out, saves all changes, and
returns to the thermostat’s default display.
• When you are in the PROGRAM menu:
– If you push a button that is not applicable to the current menu, nothing happens (your
programming is not interrupted).
– If the thermostat is idle for fteen seconds, the thermostat times out, saves all changes,
and returns to the thermostat’s default display.
– When you have nished the last step of programming a setting, pressing PROGRAM
saves your setting and returns the thermostat to the default display.
PAGE 11
Autres manuels pour T180
1
Table des matières
Autres manuels Peco Thermostat
Peco
Peco TA180-001 Manuel utilisateur
Peco
Peco WavePRO T2500 Manuel utilisateur
Peco
Peco TA155 Manuel utilisateur
Peco
Peco TB158 Manuel utilisateur
Peco
Peco T12500 Manuel utilisateur
Peco
Peco Performance pro T12000 Manuel utilisateur
Peco
Peco Peco TW206 Manuel utilisateur
Peco
Peco T8000 series Manuel utilisateur
Peco
Peco T168 Manuel utilisateur
Peco
Peco T4500 Manuel utilisateur
Peco
Peco T8000 series Manuel utilisateur
Peco
Peco TF115P-003 Manuel utilisateur
Peco
Peco TF115P-002 Manuel utilisateur
Peco
Peco WAVE WIRELESS TW205-206 Manuel utilisateur
Peco
Peco Perfomance Pro School T4900 Manuel utilisateur
Peco
Peco TA170 Manuel utilisateur
Peco
Peco Performance Pro T12000 Series Manuel utilisateur
Peco
Peco T170 Guide de l'utilisateur
Peco
Peco T180 Manuel utilisateur
Peco
Peco T2500-01 WavePRO Manuel utilisateur
Manuels Thermostat populaires d'autres marques
EWELLY
EWELLY EW-181 Manuel utilisateur
Prolon
Prolon T1100 Instructions d'installation
Computherm
Computherm Q20 Manuel utilisateur
Heatmiser
Heatmiser neoStat Manuel utilisateur
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur
