PCchips M757MR Manuel utilisateur

Important Information

This publication, including all photographs, illustrations and software, is

Neither this manual, nor any of the material contained herein, may be

reproduced without the express written consent of the manufacturer.

Disclaimer

The information in this document is subject to change without notice. The

manufacturer makes no representations or warranties with respect to the

contents hereof and specifically disclaims any implied warranties of

merchantability or fitness for any particular purpose. Further, the

manufacturer reserves the right to revise this publication and to make

changes from time to time in the content hereof without obligation of the

manufacturer to notify any person of such revision or changes.

Trademark Recognition

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft

Corp.

MMX, Pentium, Pentium-II, Pentium-III, Celeron are registered

trademarks of Intel Corporation.

VGA, OS/2, PS/2 are registered trademarks of International Business

Machines.

AMD, K5, K6 are registered trademarks of Advanced Micro Devices Inc.

Cyrix, M1 are registered trademarks of Cyrix Corporation.

Other product names used in this manual are the properties of their

respective owners and are acknowledged.

Version 1.0

Safety Compliance

Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and the receiver.

 Connect the equipment onto an outlet on a circuit different from that

to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

Shielded interconnect cables and shielded AC power cable must be

employed with this equipment to insure compliance with the pertinent RF

emission limits governing this device. Changes or modifications not

expressly approved by the system’s manufacturer could void the user’s

authority to operate the equipment.

Declaration of Conformity

This device complies with part 15 of the FCC rules. Operation is subject

to the following conditions:

 This device may not cause harmful interference, and

 This device must accept any interference received, including

interference that may cause undesired operation.

Canadian Department of Communications

This class B digital apparatus meets all requirements of the Canadian

Interference-causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du

Réglement sur le matériel brouilieur du Canada.

Contents

Chapter 1: Introduction.............................................. 1

Welcome....................................................................... 1

About the Manual.......................................................... 2

Checklist ....................................................................... 3

Standard Items........................................................... 3

Recommendations........................................................ 3

Features........................................................................ 4

Chapter 2: Installation................................................ 7

Quick Installation Table ................................................ 7

Quick Jumper Setting Reference ................................. 8

Before You Begin.......................................................... 10

Static Electricity.......................................................... 10

Choosing a Case ....................................................... 10

How to Set Jumpers................................................... 11

Preparing the Mainboard .............................................. 12

Mainboard Guide........................................................ 12

I/O Ports Side View .................................................... 14

Check the Jumper Settings........................................ 15

Install the Mainboard in the Case................................. 17

Connecting Power, Chassis Fans,

and Switches and Indicators ...................................... 19

Install Other Hardware.................................................. 21

Install the Processor .................................................. 21

Installing a Socket-370 Processor ............................. 22

Install the Memory Modules ....................................... 24

Install a Hard Disk Drive and CD-ROM ..................... 25

Installing a Floppy Diskette Drive............................... 28

Using the Expansion Slots ......................................... 29

Add-in Card Options .................................................. 30

Install Options and Extension Brackets ..................... 31

Make the External Connections ................................... 36

External Connector Color Coding .............................. 37

Chapter 3: Setup ......................................................... 38

About the Setup Utility .................................................. 38

Starting the Setup Utility............................................. 38

How to Flash a New BIOS ......................................... 40

Standard CMOS Features Option ................................ 41

Advanced BIOS Features Setup Option....................... 43

Advanced Chipset Features Option ............................. 46

Integrated Peripherals Option....................................... 49

Power Management Setup Option ............................... 51

PNP/PCI Configuration Option ..................................... 54

PCI Health Status Option ............................................. 55

Frequency Control Option ............................................ 56

Load Fail-Safe Defaults Option .................................... 57

Load Optimized Defaults Option................................... 57

Set Password................................................................ 57

Save And Exit Setup Option ......................................... 58

Exit Without Saving Option........................................... 58

Chapter 4: Software.................................................... 59

About the Software ....................................................... 59

Folders for this Mainboard............................................ 59

Running the Support CD-ROM..................................... 61

Utility Folder Installation Notes ..................................... 61

CMI8X38 Folder Installation Notes............................... 62

Audio Software........................................................... 62

Modem Driver and Software ...................................... 63

Peripheral Folder Installation Notes ............................. 63

Mainboard (KOB 630e FSFx) Installation Notes .......... 63

Appendix 1: Quick Jumper Setting Reference ........ 64

Welcome

Congratulations on purchasing the KOB 630e FSFx mainboard.

The KOB 630e FSFx mainboard is a Flex-ATX mainboard that uses 4-

layer printed circuit board and measures 228mm x 190mm. The

mainboard has a PPGA (Plastic Pin Grid Array) PGA370 processor

socket. This feature means that you can install the mainboard with a

PPGA Celeron or FC-PGA Coppermine processor.

The KOB 630e FSFx is installed with the very powerful SIS630 chipset,

which includes integrated built-in video, audio and communications

capabilities. Two 32-bit PCI expansion slots are provided. Two DIMM

sockets are available for the installation of up to 1 GB SDRAM memory.

This mainboard is an ideal platform for an inexpensive entry level or

business class multimedia personal computer.

This chapter contains the following information:

 About the Manual explains how the information in this manual is

organized

 Checklist comprises a list of the standard and optional components

that are shipped with this mainboard

 Recommendations lists some Do’s and Don’ts from the

manufacturer to help ensure reliability and performance from this

product

 Features highlights the functions and components that make this

one of the best value mainboards on the market

About the Manual

The manual consists of the following chapters:

Introduction

Use the Introduction Chapter to learn about the features of the

mainboard, and the checklist of items that are shipped with the package.

Installation

Use the Installation Chapter to learn how to install the mainboard and

get your system up and running.

Setup

Use the Setup Chapter to configure the mainboard for optimum

performance.

Software

Use the Software Chapter to learn how to use the software drivers and

support programs that are provided with this mainboard.

Checklist

Compare the contents of your mainboard package with the standard

checklist below. If any item is missing or appears damaged, please

contact the vendor of your mainboard package.

Standard Items

 1 x KOB 630e FSFx Mainboard

 1 x Cable/Bracket Pack

Diskette drive ribbon cable

IDE drive ribbon cable

 This User’s Manual

 Software Support CD-ROM Disc

Optional items

 1 x V.90 Fax/modem Card

Recommendations

This mainboard automatically determines the CPU clock frequency and

system bus frequency for the kind of processor that you install. You may

be able to change these automatic settings by changing the settings in

the system setup utility. We strongly recommend that you do not

overclock the mainboard to run processors or other components faster

than their rated speed.

Overclocking components can adversely affect the reliability of the

system and introduce errors into your system. Overclocking can

permanently damage the mainboard by generating excess heat in

components that are run beyond the rated limits.

Components on this mainboard can be damaged by discharges of static

electricity. Handle the board carefully holding it by the edges. Don’t flex

or stress the circuit board. Keep the board in its static-proof packing until

you are ready to install it. Follow the static guidelines given at the

beginning of Chapter 2.

Features

The key features of this mainboard are the wide range of processors that

can be installed, and the high level of integration, which includes built-in

audio, video, and communications.

Value-class Processors

As a platform for a value PC, the KOB 630e FSFx includes a socket-370

for the installation of the latest PGA and FC-PGA packaging processors

from Intel.

The new generation PGA Celeron processors ship in the familiar square

plastic package, and they install in a Zero Insertion Force (ZIF) socket

called a Socket-370. The new Celeron processors are close to Pentium-

II performance because they include a level-2 cache memory of 128K.

However, they operate over a 66 MHz system bus and they currently

ship at clock speeds of up to 533 MHz.

The FC-PGA Coppermine processor operates over a 66, 100 or 133

MHz system bus. The FC-PGA Coppermine ships with clock speeds

running from 500 MHz through to 750 MHz.

Assemblers can choose the processor they need to meet performance or

price targets. You can configure the system for any of the supported

processor clock speeds using the BIOS setup utility. It is not necessary

to set switches or jumpers.

Powerful Chipset Support

The processor is supported by the powerful SiS630 chipset. The SiS630

includes a built-in 128-bit AGP graphics accelerator, an integrated 3D

PCI audio controller. The SiS630 controls up to 1 GB of SDRAM memory.

The chipset also supports ACPI Ver.1.0 (Advanced Configuration and

Power Management Interface) and APM (Advanced Power Management)

power management. It provides two PCI IDE channels with UDMA 33/66,

a floppy diskette drive interface, and two bus-mastering PCI slots. The

chipset meets the requirements for the PC99 specification.

Inexpensive Memory

The board has two DIMM sockets for the installation of 168-pin, 3.3V

non-buffered DIMM memory modules. The DIMM memory modules must

be installed with SDRAM memory chips. The KOB 630e FSFx board

supports a memory bus of 100 MHz. Each installed memory module can

be populated with 16 MB up to 512 MB of memory, so a maximum total

of 1 GB memory can be installed. The integrated video system uses a

shared memory architecture so that you must reserve some of the

installed memory as video memory using the system BIOS. You must

install at least one memory module, with a minimum capacity of 16 MB,

which can be installed in either available DIMM slot.

Highly Integrated Design

As well as the SIS630 chipset, the KOB 630e FSFx features other highly

integrated silicon chips. The SIS950 I/O controller handles the

mainboard’s I/O functions, as well as hardware monitoring. The

HT8738/PCI C3DX is a two-chip solution that provides an integrated

audio and fax/modem system.

Built-in AGP 3D-Graphics

The SiS630 chipset includes an integrated 128-bit 2D/3D graphics

accelerator. The graphics system uses the Ultra-AGP architecture and

uses a shared memory scheme that allows up to 64 MB of system

memory to be used as video memory. The graphics system includes

special accelerators for DVD playback and supports screen resolutions

up to 1920 x 1440 and color depths up to 16 M (True Color). Driver

support is provided for Windows 95/98, Windows 2000, Windows NT 4.0,

and OS/2.

Built-in V.90 Fax/modem (DAA Module is optional)

The KOB 630e FSFx mainboard has a built-in 56 Kbps fax/modem. That

supports the V.90 protocol. The chip is integrated with the built-in audio

system to support voice as well as data transmissions. In order to use

the built-in fax/modem, you must install a DAA module that supplies the

RJ11 sockets for LINE and TELEPHONE.

Expansion Options

The KOB 630e FSFx mainboard is pre-installed with features such as

audio, video and a DAA module (optional) for a modem, that normally

requires add-in cards, so the two 32-bit PCI slots provide plenty of

expansion potential. The PCI slots support bus mastering.

Integrated I/O

The mainboard has a full set of I/O ports and connectors. The I/O

template on the backplane includes two PS/2 ports for mouse and

keyboard, one serial port, one parallel port, one VGA monitor port, one

game/MIDI port, two USB ports and audio jacks for microphone, line-in

and line-out. The board has a header for the optional installation of an IR

port and a second serial port. It also includes two PCI IDE channels with

UltraDMA 33/66 support, and a floppy disk drive interface.

Hardware Monitoring

Hardware monitoring is fully supported and the board ships with

hardware monitoring software. System assemblers and network

administrators can reduce downtime and repair costs by monitoring

critical temperatures and voltages on the system. The supplied hardware

monitoring software lets you set parameters that prompt warnings when

they are exceeded.

Keyboard Power On Feature

Using the system BIOS setup program, you can configure the system to

turn on by using a keyboard typed password or by pressing a hot-key

combination (Ctrl+Alt+Backspace). A green keyboard is not required.

Programmable Firmware

The mainboard includes Award BIOS that allows BIOS setting of CPU

parameters. The fully programmable firmware enhances the system

features and allows users to set power management, CPU and memory

timing, LAN and modem wake-up alarms, and so on. The firmware can

also be used to set parameters for different Celeron processor clock

speeds so that you don’t need to change mainboard jumpers and

switches.

Autres manuels pour M757MR

Table des matières

Autres manuels PCchips Carte mère

PCchips

PCchips M927 Series Manuel utilisateur

PCchips

PCchips M726MRT Manuel utilisateur

PCchips

PCchips M810LMR 3.0x Manuel utilisateur

PCchips

PCchips Motherboard Manuel utilisateur

PCchips

PCchips M786 Series Manuel utilisateur

PCchips

PCchips P47G Series Manuel utilisateur

PCchips

PCchips M754 Plus Series Manuel utilisateur

PCchips

PCchips A41G V7.0 Manuel utilisateur

PCchips

PCchips P53G Series Manuel utilisateur

PCchips

PCchips M925ALU Manuel utilisateur

PCchips

PCchips M847FLU Manuel utilisateur

PCchips

PCchips M925G 8.0 Manuel utilisateur

PCchips

PCchips M848LU Manuel utilisateur

PCchips

PCchips M810 series Manuel utilisateur

PCchips

PCchips M758 Plus Series Manuel utilisateur

PCchips

PCchips M925G Series Manuel utilisateur

PCchips

PCchips M905ULR 3.2 Manuel utilisateur

PCchips

PCchips M757MR Manuel utilisateur

PCchips

PCchips M761 V1.x Manuel utilisateur

PCchips

PCchips M766LMRT Manuel utilisateur

PCchips

PCchips M851AG Manuel utilisateur

PCchips

PCchips M812 Series Manuel utilisateur

PCchips

PCchips M957G Manuel utilisateur

PCchips

PCchips M586MR Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur