PASCO OS-8526A Manuel utilisateur

RED DIODE LASER

003-10496

AVOID EXPOSURE

LASER LIGHT IS EMITTED

FROM THIS APERTURE

10101 Foothill Blvd.

Rosvill, CA. 95747 USA

D DIODE LASER

3 10496

10101 Foothill Blvd.

Ros vill , CA. 95747 USA

OS-8526A

X-Y ADJUSTABLE

DIODE LASER

10101 Foothill Blvd.

Roseville, CA 95747 USA

Manufatured by:

Complies with FDA

performance standards for

laser products except for

deviations pursuant to Laser

Notice No. 50, dated une 24, 2007

LASER LIGHT

DO NOT STARE

INTO BEAM

CLASS 2 LASER PRODUCT

650nm, <1mW CW (Re )

CLASSIFIED 60825-1 2007

Instruction Sheet

for the PASCO

Model OS-8526A

X-Y ADJUSTABLE DIODE LASER

012-12246A

Introduction

The X-Y Adjustable Diode Laser allows users to eas-

ily incorporate laser light into a wide variety of labora-

tory experiments. Designed to be mounted on a rod

stand, the X-Y Adjustable Diode Laser can rotate

360° allowing the user to set up the unit in virtually

any position.

Equipment

– X-Y Adjustable Diode Laser.

– 9VDC adapter

Additional equipment recommended:

– PASCO ME-8735 Large Rod Stand

– PASCO ME-8738 (90 cm) or ME-8741 (120cm)

support rod

Replacement parts:

Description PASCO part no.

thumbscrew assembly 617-016

Specifications:

Wavelength 650 nm

Laser Power for classification <1 mW

Divergence <2 mrd

Beam Diameter at aperture: 3 mm

➤CAUTION - use of controls or adjustments

or performance of procedures other than those

specified herein may result in hazardous radia-

tion exposure.

• LASER LIGHT - DO NOT STARE INTO BEAM.

• CLASS 2 LASER PRODUCT

• This Laser Product is designated as Class 2

during all procedures of operation.

• Do not point the laser or allow the laser to be

directed or reflected toward people or animals.

Phone (916) 786-3800  FAX (916) 786-8905  web: www.pasco.com

10101 Foo hills Blvd.  Roseville, CA 95678-9011 USA

be er

each science

ways o

ME-8735 Large Rod Stand

(not included)

Figure 1: Setting Up the OS-8526A

X-Y Adjustable Diode Laser

support rod

thumbscrew “fixed” rod

clamp

OS-8526A X-Y

Adjustable Diode

Laser

RED DIODE LASER

003-10496

AVOID EXPOSURE

LASER LIGHT IS EMITTED

FROM THIS APERTURE

OS-8526A

X-Y ADJUSTABLE

DIODE LASER

10101 Foothill Blvd.

Roseville, CA 95747 USA

Manufa tured by:

Complies with FDA

performance standards for

laser products except for

deviations pursuant to Laser

Notice No. 50, dated une 24, 2007

LASER LIGHT

DO NOT STARE

INTO BEAM

CLASS 2 LASER PRODUCT

650nm, <1mW CW (Re )

CLASSIFIED 60825-1 2007

Assembly

➀Attach the “fixed” rod clamp, with the locking

knob permanently affixed, to a base rod up to 1/2”

(12.5 mm) in diameter. See Figure 1.

Complies with FDA

performance standards for

laser products except for

deviations pursuant to Laser

Notice No. 50, dated une 24, 2007

LASER LIGHT

DO NOT STARE

INTO BEAM

CLASS 2 LASER PRODUCT

650nm, <1mW CW (Re )

CLASSIFIED 60825-1 2007

Warning Label

Mfg. I.D. Label

X-Y Adjustable Laser 012-12246A

9 VDC 500mA

GND

3.5mm

HORIZONTAL

ADJUST

VERTICAL

ADJUST

OFF

POWER

+9VDC

RED LASER DIODE

Wav l ngth: 650 nm

Output: <1mW

OS-8526A

X-Y ADJUSTABLE

DIODE LASER

10101 Foothill Blvd.

Roseville, CA 95747 USA

Manufatured by:

RED DIODE LASER

003-10496

AVOID EXPOSURE

LASER LIGHT IS EMITTED

FROM THIS APERTURE

OS-8526A

X-Y ADJUSTABLE

DIODE LASER

10101 Foothill Blvd.

Roseville, CA 95747 USA

Manufa tured by:

Complies with FDA

performance standards for

laser products except for

deviations pursuant to Laser

Notice No. 50, dated une 24, 2007

LASER LIGHT

DO NOT STARE

INTO BEAM

CLASS 2 LASER PRODUCT

650nm, <1mW CW (Re )

CLASSIFIED 60825-1 2007

Technical Support

For assistance with any PASCO product, contact

PASCO at:

Address: PASCO scientific

10101 Foothills Blvd.

Roseville, CA 95747-7100

Phone: 916-786-3800 (worldwide)

800-772-8700 (U.S.)

Fax: (916) 786-7565

Web: www.pasco.com

Email: [email protected]

Limited Warranty

For a description of the product warranty, see the

PASCO catalog.

➤➤

➤ NOTE: NO service or maintenance is al-

lowed, on this product, by the customer. Return

unit to the factory for service or repair.

Unit is NOT to be opened or modified by the

Customer

The PASCO scientific OS-8528A Diode Laser is

granted to non-profit educational institutions for re-

production of any part of this manual, providing the

reproductions are used only in their laboratories and

classrooms, and are not sold for profit. Reproduction

under any other circumstances, without the written

consent of PASCO scientific, is prohibited.

Trademarks

PASCO and PASCO scientific are trademarks or regis-

tered trademarks of PASCO scientific, in the United

States and/or in other countries. All other brands,

products, or service names are or may be trademarks

or service marks of, and are used to identify, products

or services of, their respective owners. For more infor-

mation visit www.pasco.com/legal.

Figure 2: X-Y Adjustable Diode Laser Alignment

laser diode

assembly

“fixed” rod

clamp

thumbscrew

support rod

locking knob

input jack

(9VDC)

adjustment

screws

Figure 3: Laser Beam Fine Adjustment

➁Secure the rod clamp in place with the thumb-

screw.

➂Loosen the locking knob and rotate the laser diode

assembly into the desired position. See Figure 2.

➃Tighten the locking knob against the laser diode

housing until secure.

➄Plug the 9VDC adapter phone plug into the back

of the laser and turn on the laser.

➅If necessary, adjust the direction of the laser beam

from left-to-right and up-and down until the beam is in

desired position. See Figure 3.

power switch

Autres manuels PASCO Instrument de mesure

PASCO

PASCO PS-3230 Manuel utilisateur

PASCO

PASCO OS-8527A Manuel utilisateur

PASCO

PASCO Pasport PS-2600 Manuel utilisateur

PASCO

PASCO PS-3238 Manuel utilisateur

PASCO

PASCO PS-3521 Manuel utilisateur

PASCO

PASCO PS-3320 Manuel utilisateur

PASCO

PASCO SF-9500A Manuel utilisateur

PASCO

PASCO OS-8458 Manuel utilisateur

PASCO

PASCO ME-9495A Manuel utilisateur

PASCO

PASCO PS-3237 Manuel utilisateur

PASCO

PASCO PS-3222 Manuel utilisateur

PASCO

PASCO SF-9069 Manuel utilisateur

PASCO

PASCO PASPORT PS-2108 Manuel utilisateur

PASCO

PASCO SF-9568A Manuel utilisateur

PASCO

PASCO OS-9171 Manuel utilisateur

PASCO

PASCO OS-7053 Manuel utilisateur

PASCO

PASCO TD-8564 Manuel utilisateur

PASCO

PASCO PS-3214 Mode d’emploi

PASCO

PASCO PASPORT PS-2131 Manuel utilisateur

PASCO

PASCO ES-9042A Manuel utilisateur

PASCO

PASCO SF-9568A Manuel utilisateur

PASCO

PASCO PS-2600 Manuel d'utilisation et d'entretien

PASCO

PASCO SE-7611 Manuel utilisateur

PASCO

PASCO ES-9078A Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur