Partner KB-18LD2 Manuel utilisateur

KB18LD2-xx

Pin-pad Terminal

User’s manual

FEATURES

lProgrammable 4 columns x 5 rows key matrix.

A maximum of 12 codes can be defined for each key.

lData can be displayed on 16 columns x 2 rows.

lIncluded manual swipe MSR (Magnetic Stripe Reader.)

ISO standard.

lInclude manual swipe barcode reader.

For code 39 only.

lProvides the RS-232 interface.

Baud rate from 2400 to 19200 bps.

lProvides the AT keyboard interface.

Version: 1.21 (2002.04.19)

ORDERING INFORMATION

Model LCD Keypad MSR Barcode

(Code39) Interface

KB18LD2-X0-RRS232

KB18LD2-X0-KAT KB

KB18LD2-E1-RTrack 1 RS232

KB18LD2-E1-KTrack 1 AT KB

KB18LD2-E2-RTrack 2 RS232

KB18LD2-E2-KTrack 2 AT KB

KB18LD2-E3-RTrack 3 RS232

KB18LD2-E3-KTrack 3 AT KB

KB18LD2-E5-RTrack 12 RS232

KB18LD2-E5-KTrack 12 AT KB

KB18LD2-E6-RTrack 23 RS232

KB18LD2-E6-KTrack 23 AT KB

KB18LD2-E7-RTrack 123 RS232

KB18LD2-E7-KTrack 123 AT KB

KB18LD2-B39-RRS232

KB18LD2-B39-KAT KB

GENERAL SPECIFICATIONS

NO ITEM Description

1Key contact tech Gold cross point, linear feel

2Number of keys 19 (18keys of 1x1, 1key of 1x2)

3Display method Liquid Crystal display

4Number of char 32 characters (16 columns x 2 lines)

5Character 5 x7 dot matrix, 96 alphanumeric

6Card standard ISO 7811/2

7Interface RS232C

AT keyboard

8Power supply 9-12Vdc External (RS232)

INTERFACE SPECIFICATIONS

1. RS232

Connector type: D-sub 9 pin (Female)

NO Signal Direction Function description

2TXD To PC/Host Transmit data

3RXD From PC/Host Receive data

4DSR From PC/Host PC/Host ready signal

5GND Signal ground

6DTR To PC/Host Pin pad ready signal

Connector type: DC-jack

NO Signal Direction Function description

+VPP From adapter 9-12Vdc, 250mA

-GND From adapter

2. AT Keyboard

Connector type: PS/2, male for PC, female for standard keyboard

COMMAND

HOM /Move cursor to home position/

Dec. Format

〔011〕

Hex. Format 〔0Bh〕

Description Moves the cursor to the left-most position of the upper line

CLR /Clear display screen, and cursor to home/

Dec. Format

〔012〕

Hex. Format 〔0CH〕

Description Clear display screen, and cursor to home

CR /Move cursor to lower line left-most position/

Dec. Format

〔013〕

Hex. Format 〔0DH〕

Description Moves the cursor to the left-most position on the lower line

CURB Cursor on and bottom bar

Dec. Format

〔017〕

Hex. Format 〔11h〕

Description Cursor on and bottom bar

CURH Cursor on and block all

Dec. Format

〔018〕

Hex. Format 〔12h〕

Description Cursor on and block all

ESC x n /Set transmit MSR/Barcode data package

Dec. Format

〔027〕〔 120〕n 30h<=n<=33

Hex. Format 〔1Bh〕〔 78h〕n

Description Set transmit MSR data package

n=30h, normal n=31h, data +CR

n=32h, “〔”data”〕” n=33h, “〔”data”〕”+CR refer ※3

DEC”%” n s

/Set key code status/ ※5 (except KB18LD-X0)

Dec. Format

〔030〕〔 037〕n s

Hex. Format 〔1Eh〕〔 25h〕n s

Description Set key code status

n =key position, refer Table key map

s =”0”, Null key

s =”1”, use user define key code

DCE”@”/Clear EEPROM and reset/

※

6 (except KB18LD-X0)

Dec. Format

〔030〕〔 064〕

Hex. Format 〔1Eh〕〔 40h〕

Description Clear EEPROM and wait 15 sec

DCE “&” n I

〔

DATA

〕

*I / Set user defined key code /

※

Dec. Format

〔030〕〔 038〕n I {data}*I (except KB18LD-X0)

Hex. Format 〔1Eh〕〔 26h〕n I {data}*I

Description Set user defined key code and change key status is use

User defined key code

n is key position (31h＜=n＜=45h)

Refer ※1

I is key string length (31h＜=I＜=3Ch)

01h＜={data}＜=FFh

DCD”

！

”/transmit setting data/

Dec. Format

〔030〕〔 033〕

Hex. Format 〔1Eh〕〔 21h〕

Description Transmit setting data to PC.

US n /Move cursor to specified position/

Dec. Format

〔031〕n {0＜=n＜31 or 48＜=n＜=67}

Hex. Format 〔1Fh〕n refer ※2

Description Moves the cursor to the n position

CURC Cursor off

Dec. Format

〔019〕

Hex. Format 〔13h〕

Description Cursor off

DC4 /Sounds a short beep/

Dec. Format

〔020〕

Hex. Format 〔14h〕

Description Sounds a short beep, 0.2 sec

DC5 /SOUND 4 TIMES SHORT BEEP/

Dec. Format

〔021〕

Hex. Format 〔15h〕

Description Sounds 4 times short beep and pulse interval is 0.2sec ON

And 0.1 sec break

DC6 /Enable keyboard beep echo/

Dec. Format

〔022〕

Hex. Format 〔16h〕

Description Enable beep echo to valid key press

DC7 /Disable keyboard beep echo/

Dec. Format

〔023〕

Hex. Format 〔17h〕

Description Disable beep echo to valid key press

DC8 Valid key press echo to LCD/

Dec. Format

〔024〕

Hex. Format 〔18h〕

Description Valid key press is transmit to Host and show to display

DC9 /Valid key press not echo to LCD/

Dec. Format

〔025〕

Hex. Format 〔19h〕

Description Valid key press only transmit to Host

ESC b n /Baud rate setting/ (except KB18LD-X0)

Dec. Format

〔027〕〔 098〕n 30h＜=n＜=33h

Hex. Format 〔1Bh〕〔 62h〕n

Description Setting baud rate and save to EEPROM

n =30h/31h/32h/33h→baud rate=9600/4800/2400/19200 bps

ESC m n /MSR type setting/

Dec. Format

〔027〕〔 109〕n 30h＜=n＜=33h

Hex. Format 〔1Bh〕〔 6Dh〕n

Description Setting MSR type rate and save to EEPROM

n = 31h : Track 1

n = 32h : Track 2

n = 33h : Track 1 and 2

n = 34h : Track 3

n = 36h : Track 2 and 3

n = 37h : Track 1, 2 and 3

※

1. Key position n and default key code

40h41h42h43h“A” “B” “C” “D”

3Ch3Dh3Eh3Fh“7” “8” “9” “-”

38h39h3Ah3Bh“4” “5” “6” “+”

35h 36h 37h “1” “2” “3”

32H 31H 33h 34h “0”“00” “.” CR

※

2. LCD display position n is

00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63

64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79

※

3. Example for MSR/Barcode data format

n =30h____Not send [ ] and CR DATA

n =31h____Not send [] and send CR DATA +CR

n =32h____Send [] and no CR 〔DATA〕

n =33h____Send [] AND CR 〔DATA〕+CR”

n =34h____Send start/end sentinel of card track data

n =35h____No send start/end sentinel of card track data

n =36h____Barcode is with checksum

n =37h____Barcode is not with checksum

n =38h____Barcode is full ASCII format

n =39h____Barcode is not full ASCII format

n =3Ah____Not send barcode checksum character

n =3Bh____Send barcode checksum character

Note: the checksum character is not shown in the LCD.

※

4. Example for defined key code

Host send to pin-pad: DCE “&”〔31h〕〔 36h〕”123456” and pin pad echo to

Host; “OK”

Valid key position〔31h〕press and the pin pad send to Host;”123456”

※

5. Example for Set key code status

Host send to pin-pad: DCE “%” [31h][30h] and pin-pad echo to Host;

“OK”

Valid key position [31h] is defined to be Null key.

※

6. Example for Clear EEPROM and reset

Host send to pin-pad: DCE “@”

Pin-pad will be clear EEPROM echo to Host; “OK” and Reset like power on

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Partner Terminal tactile

Partner

Partner C10-1R Manuel utilisateur

Partner

Partner C14-1E Manuel utilisateur

Partner

Partner PT-8800 Manuel utilisateur

Partner

Partner OT-200 Manuel utilisateur

Partner

Partner Themis TI-890 Manuel utilisateur

Partner

Partner PT-1300 Manuel utilisateur

Partner

Partner CD-70 Manuel utilisateur

Partner

Partner PT-6212-ES Manuel utilisateur

Partner

Partner SP-1000-C Manuel utilisateur

Partner

Partner SP-26 Series Manuel utilisateur

Partner

Partner SP-3515 Manuel utilisateur

Partner

Partner SP-1000 Manuel utilisateur

Partner

Partner SP-850-S Manuel utilisateur

Partner

Partner SP-850 Manuel utilisateur

Partner

Partner SP-2500 Series Manuel utilisateur

Partner

Partner SP-850-S Manuel utilisateur

Partner

Partner PAT-215 Manuel utilisateur

Partner

Partner PT-1630 Manuel utilisateur

Partner

Partner A4-1-K Manuel utilisateur

Partner

Partner PT-4000i Manuel utilisateur

Partner

Partner OT-310 Manuel utilisateur

Partner

Partner SP-820 Manuel utilisateur

Partner

Partner SP-3511 Manuel utilisateur

Partner

Partner OT-310 Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur

Prestel

Prestel VCS-G2PRO Manuel utilisateur