Parallax Ag9050 Manuel utilisateur

Web Site: www.parallax.com

Forums: forums.parallax.com

Sales: sales@parallax.com

Technical: support@parallax.com

Office: (916) 624-8333

Fax: (916) 624-8003

Sales: (888) 512-1024

Tech Support: (888) 997-8267

Ag9050 Power over Ethernet Module (#40012)

The Ag9050 Power over Ethernet Module is designed to be a drop-in Power over Ethernet (PoE) solution

for the WIZnet W5200 Ethernet Board. As long as your network supports power over Ethernet the

W5200 + QuickStart board can both be powered and communicate.

Features

Power over Ethernet for your WIZnet W5200 Board and P8X32A Propeller QuickStart Board

Regulated 5 V output powers your QuickStart Board and other peripherals

Overload and short-circuit protection

Industrial operating temperature range

Key Specifications

Power Requirements: Power Sourcing Equipment (PSE) or Midspan Equipment

Power Output: 9 watt max power output (5 V @ 1.8 A)

Communication Interface: Complies with IEEE 802.3af

Operating temperature: -40 to +185 °F (-40 to +85 °C)

Dimensions: 3.0 x 2.0 in (7.62 x 5.08 cm)

Application Ideas

Remote IP based security system

IP based home automation

Long distance tethered robotics

Additional Items Required

Power Sourcing Equipment (PSE)

or Midspan Equipment

WIZnet W5200 Board (#40002)

P8X32A Propeller QuickStart

(#40000)

Soldering iron

Solder

Safety glasses

Downloaded from Arrow.com.

Assembly Instructions

1. Make sure your QuickStart + W5200 boards have been safely powered down and carefully

separated. Set the QuickStart board aside.

2. Carefully insert the Ag9050 Power over Ethernet module from the top down so that the module’s

large transformer is facing outward. The module is pin-keyed, so you cannot insert the module

backwards.

3. Use your soldering iron to solder the Ag9050 module into place from the underside of the W5200

module. Apply solder to all of the module’s pins. Make sure there are no accidental solder

bridges.

4. Check that your board setup looks like this when you’re done soldering.

Ag9050 PoE Module installed into the W5200’s PoE header.

Downloaded from Arrow.com.Downloaded from Arrow.com.

5. Reattach your QuickStart Board and any other peripherals you may have added.

6. Connect an Ethernet cable to the W5200. The Ag9050 PoE module should automatically

negotiate with Power Sourcing Equipment and begin supplying power to the QuickStart board.

Resources and Downloads

Check for the latest version of this document and datasheets from the Ag9050 Power over Ethernet

Module product page. Go to www.parallax.com and search 40012.

Revision History

Version 1.0 – Original Document

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Parallax Unité de contrôle

Parallax

Parallax 27911 Manuel utilisateur

Parallax

Parallax TSL1401-DB Manuel utilisateur

Parallax

Parallax 28560 Manuel utilisateur

Parallax

Parallax TCS3200-DB Instructions d'utilisation et de sécurité

Parallax

Parallax Easy Bluetooth Manuel utilisateur

Parallax

Parallax 32440 Manuel utilisateur

Parallax

Parallax 29115 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur