Paradyne Hotwire 7975 Manuel utilisateur

HOTWIRE7975

M/SDSL STANDALONE

TERMINATION UNIT

USER’S GUIDE

Document No. 7975-A2-GB20-40

December 1998

Printed on recycled paper

A 7975-A2-GB20-40

December 1998

Printed in U.S.A.

Notice

This publication is protected by federal copyright law. No part of this publication may be copied or distributed,

transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language in any form

or by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the

express written permission of Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773.

Paradyne Corporation makes no representation or warranties with respect to the contents hereof and specifically

disclaims any implied warranties of merchantability or fitness for a particular purpose. Further, Paradyne Corporation

reserves the right to revise this publication and to make changes from time to time in the contents hereof without

obligation of Paradyne Corporation to notify any person of such revision or changes.

Changes and enhancements to the product and to the information herein will be documented and issued as a new

release to this manual.

Warranty, Sales, and Service Information

Contact your local sales representative, service representative, or distributor directly for any help needed. For

additional information concerning warranty, sales, service, repair, installation, documentation, training, distributor

locations, or Paradyne worldwide office locations, use one of the following methods:

HVia the Internet: Visit the Paradyne World Wide Web site at http://www.paradyne.com

HVia Telephone: Call our automated call system to receive current information via fax or to speak with a

company representative.

— Within the U.S.A., call 1-800-870-2221

— Outside the U.S.A., call 1-727-530-2340

Trademarks

All products and services mentioned herein are the trademarks, service marks, registered trademarks or registered

service marks of their respective owners.

Document Feedback

We welcome your comments and suggestions about this document. Please mail them to Technical Publications,

Paradyne Corporation, 8545 126th Ave. N., Largo, FL 33773, or send e-mail to [email protected]. Include

the number and title of this document in your correspondence. Please include your name and phone number if you

are willing to provide additional clarification.

Important Information

7975-A2-GB20-40 December 1998

Important Safety Instructions

1. Read and follow all warning notices and instructions marked on the product or included in the manual.

2. Input power to this product must be provided by one of the following: (1) a UL Listed/CSA Certified power source

with a Class 2 or Limited Power Source (LPS) output for use in North America; or (2) a 24 Vdc National Electric

Code (NEC) ANSI/NFPA 70/Canadian Electric Code (CEC) Class 2 circuit installed in accordance with articles

110-16, 110-17, and 110-18 of the NEC, and articles 2-308, 2-310, 2-312, 2-314, 2-200, and 2-202 of the CEC, or

(3) a Safety Extra Low Voltage (SELV) power source with a maximum available output of less than 240 VA,

certified for use in the country of installation.

3. Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to

protect it from overheating, these slots and openings must not be blocked or covered.

4. Do not allow anything to rest on the power cord and do not locate the product where persons will walk on the

power cord.

5. Do not attempt to install or service this product yourself, as opening or removing covers may expose you to

dangerous high voltage points or other risks. Refer all installation and servicing to qualified service personnel.

6. General purpose cables are provided with this product. Special cables, which may be required by the regulatory

inspection authority for the installation site, are the responsibility of the customer.

7. When installed in the final configuration, the product must comply with the applicable Safety Standards and

regulatory requirements of the country in which it is installed. If necessary, consult with the appropriate regulatory

agencies and inspection authorities to ensure compliance.

8. A rare phenomenon can create a voltage potential between the earth grounds of two or more buildings. If

products installed in separate buildings are interconnected, the voltage potential may cause a hazardous

condition. Consult a qualified electrical consultant to determine whether or not this phenomenon exists and, if

necessary, implement corrective action prior to interconnecting the products.

9. In addition, if the equipment is to be used with telecommunications circuits, take the following precautions:

—Never install telephone wiring during a lightning storm.

—Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

—Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the

network interface.

—Use caution when installing or modifying telephone lines.

—Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of

electric shock from lightning.

—Do not use the telephone to report a gas leak in the vicinity of the leak.

Important Information

C 7975-A2-GB20-40

December 1998

EMI Warnings

!WARNING:

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

The authority to operate this equipment is conditioned by the requirements that no modifications will be

made to the equipment unless the changes or modifications are expressly approved by Paradyne

Corporation.

!WARNING:

To Users of Digital Apparatus in Canada:

This Class A digital apparatus meets all requirements of the Canadian interference-causing equipment

regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du règlement sur le matérial

brouilleur du Canada.

7975-A2-GB20-40 December 1998

Contents

About This Guide

HDocument Purpose and Intended Audience v. . . . . . . . . . . . . . . . . . . . . . . . .

HDocument Summary v. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HProduct-Related Documents vi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 About the Hotwire 7975 Standalone Termination Unit

HM/SDSL Overview 1-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HHotwire 7975 Features 1-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HNetwork Configuration 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HUser Interface Types 1-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HFront Panel LED Status Indicators 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HRear Panel Interface Connections 1-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HSNMP Management Capabilities 1-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Management Information Base (MIB) Support 1-5. . . . . . . . . . . . . . . . . . .

SNMP Traps Support 1-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Using the Asynchronous Terminal Interface

HUser Interface Access 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HCommunication Port Settings 2-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HInitiating an ATI Session 2-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HScreen Work Areas 2-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HNavigating the Screens 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Keyboard Keys 2-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Screen Function Keys 2-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switching Between Screen Work Areas 2-8. . . . . . . . . . . . . . . . . . . . . . . .

HEnding an ATI Session 2-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents

ii 7975-A2-GB20-40

December 1998

3 Initial Startup and Configuration

HOverview 3-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HConnecting Power to the Unit 3-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connecting the Unit to an Optional External DC Power Source 3-2. . . .

HConnecting to the Network 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HConnecting to a System Terminal 3-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HEntering Identity Information 3-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HChoosing a Configuration Mode 3-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HConfiguring the Unit Using the Configuration Menus 3-5. . . . . . . . . . . . . . . . .

Configuration Options 3-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HConfiguring the Unit Using the Internal Switches 3-6. . . . . . . . . . . . . . . . . . . .

Switchpack Locations 3-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Switchpack Definitions 3-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HAccessing and Displaying Configuration Options 3-11. . . . . . . . . . . . . . . . . . . .

HConfiguration Edit/Display 3-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HConfiguring AutoRate 3-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HConfiguration Loader 3-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HSaving Configuration Options 3-16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HDownload Code 3-17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 Monitoring the Unit

HWhat to Monitor 4-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HViewing System and Test Status 4-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Health and Status 4-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Self-Test Results 4-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Test Status 4-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HViewing Network Error Statistics 4-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HViewing Network Performance Statistics 4-8. . . . . . . . . . . . . . . . . . . . . . . . . . .

HViewing 7975 Standalone Termination Unit LEDs 4-9. . . . . . . . . . . . . . . . . . . .

H7975 Standalone Termination Unit LEDs 4-10. . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents

iii

7975-A2-GB20-40 December 1998

5 Testing

HAccessing the Test Menu 5-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HRunning Network Tests 5-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Line Loopback 5-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Repeater Loopback 5-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Send Remote Line Loopback 5-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Send and Monitor 511 5-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HRunning SYNC Data Port Tests 5-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Data Terminal Loopback 5-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Data Channel Loopback 5-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Send Remote Data Channel Loopback 5-10. . . . . . . . . . . . . . . . . . . . . . . . .

HDevice Tests 5-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lamp Test 5-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HEnding an Active Test 5-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6 Messages and Troubleshooting

HOverview 6-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HConfiguring SNMP Traps 6-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HDevice Messages 6-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HTroubleshooting 6-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 Security

HOverview 7-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HATI Access Levels 7-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HCreating a Login 7-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HDeleting a Login 7-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HControlling SNMP Access 7-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Assigning SNMP Community Names and Access Types 7-4. . . . . . . . . .

Limiting SNMP Access through the IP Addresses of the Managers 7-5.

HResetting the Termination Unit’s COM Port or Factory Defaults 7-5. . . . . . . .

8 IP Addressing

HSelecting an IP Addressing Scheme 8-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HIP Addressing Example 8-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents

iv 7975-A2-GB20-40

December 1998

A Configuration Option Tables

HOverview A-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HNetwork Interface Options Menu A-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HSynchronous Data Port Options Menu A-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HSystem Options Menu A-7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HCommunication Port A-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HManagement and Communication Options Menu A-11. . . . . . . . . . . . . . . . . . . .

Telnet Sessions Options A-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Communication Protocol Options A-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SNMP Traps Options A-14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

General SNMP Management Options A-16. . . . . . . . . . . . . . . . . . . . . . . . . .

SNMP NMS Security Options A-17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

B Standards Compliance for SNMP Traps

HSNMP Traps B-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

warmStart B-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

authenticationFailure B-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

linkUp and linkDown B-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HEnterprise-Specific Traps B-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

C Cables and Pin Assignments

HOverview C-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HDSL Network Interface Cable C-2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HCOM Port Interface Cable C-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HEIA-530A Port Interface Connector C-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HEIA-530A-to-X.21 Interface Cable C-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HEIA-530A-to-RS449 Cable Interface C-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HEIA-530A-to-V.35 Cable Interface C-10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HPower Input Connector C-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

HOptional Power Cable C-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

D Technical Specifications

Glossary

Index

7975-A2-GB20-40 December 1998

About This Guide

Document Purpose and Intended Audience

This guide contains information needed to set up, configure, and operate the

Hotwire 7975 Multirate/Symmetric Digital Subscriber Line (M/SDSL) Standalone

Termination Unit and is intended for installers and operators.

Document Summary

Section Description

Chapter 1

About the 7975 Standalone Termination Unit.

Describes the

7975 Termination Unit’s features and capabilities.

Chapter 2

Using the Asynchronous Terminal Interface.

Provides

instructions for accessing the user interface and navigating

through the screens.

Chapter 3

Initial Startup and Configuration.

Provides procedures for

setting up the user interface and configuration steps.

Chapter 4

Monitoring the Unit.

Describes using the LEDs, status, and

network statistics to monitor the unit.

Chapter 5

Testing.

Provides information about available tests and test

setup.

Chapter 6

Messages and Troubleshooting.

Provides information on

SNMP traps, device messages, and troubleshooting.

Chapter 7

Security.

Presents procedures for creating a login, setting

the effective access levels, and controlling SNMP access.

Chapter 8

IP Addressing.

Provides information and examples

regarding IP addresses.

About This Guide

vi 7975-A2-GB20-40

December 1998

Section Description

Appendix A

Configuration Option Tables.

Contains all configuration

options, default settings, and possible settings.

Appendix B

Standards Compliance for SNMP Traps.

Contains SNMP

trap compliance information.

Appendix C

Cables and Pin Assignments.

Contains connector and

interface information.

Appendix D

Technical Specifications.

Contains physical and regulatory

specifications, network and port interfaces, power

consumption values, and accessory part numbers.

Glossary Defines acronyms and terms used in this document.

Index Lists key terms, acronyms, concepts, and sections in

alphabetical order.

Product-Related Documents

Document Number Document Title

8775-A2-GB20

Hotwire 8775 M/SDSL Termination Unit User’s Guide

8775-A2-GZ40

Hotwire 8775 M/SDSL Termination Unit Installation

Instructions

Contact your sales or service representative to order additional product

documentation.

Paradyne documents are also available on the World Wide Web at:

http://www.paradyne.com

Select

Service & Support

→

Technical Manuals

Autres manuels pour Hotwire 7975

Table des matières

Autres manuels Paradyne Modem

Paradyne

Paradyne COMSPHERE 3830 Manuel utilisateur

Paradyne

Paradyne 6310 MVLT Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3800PLUS Manuel utilisateur

Paradyne

Paradyne Hotwire 8775 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

Paradyne

Paradyne 6381-A3 Instructions d'utilisation d'origine

Paradyne

Paradyne COMSPHERE 3800PLUS Manuel utilisateur

Paradyne

Paradyne StormPort DSL Modem Manuel utilisateur

Paradyne

Paradyne 6218-A1-200 Manuel utilisateur

Paradyne

Paradyne 39xx Series Manuel d'exploitation et d'entretien

Paradyne

Paradyne 3162 Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3800PLUS Mode d’emploi

Paradyne

Paradyne COMSPHERE 3825Plus Guide de démarrage rapide

Paradyne

Paradyne COMSPHERE 3921PLUS Manuel utilisateur

Paradyne

Paradyne 7984 Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3825Plus Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3810 Instructions d'installation

Paradyne

Paradyne HOTWIRE 7925 Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3800PLUS Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3800 Series Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3910 Manuel du propriétaire

Paradyne

Paradyne COMSPHERE 3920PLUS Series Manuel du produit

Paradyne

Paradyne Hotwire 6205 Manuel utilisateur

Paradyne

Paradyne 7984 Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur

Zoom

Zoom 1070 Series Manuel utilisateur