Paradyne COMSPHERE 3610 Mode d’emploi

You have accessed an older version of a

Paradyne product document.

Paradyne is no longer a subsidiary of

AT&T. Any reference to AT&T Paradyne is

amended to read Paradyne Corporation.

COMSPHERE 6800 Series Network Management System

3825

Plus

, 3610/3611, 392x

Plus,

and 3800

Plus

Release Notes

Document Number 6800-A2-GK65-00

June 1995

Overview

This document provides minor updates to the 3610/3611 DSUs and information for the following new products:

•3825Plus modem – Supports either 2-wire lease (APL) or 2-wire dial (PSTN) circuits without Dial Backup

capability.

•392xPlus singleport modem – Provides V.34 modulation on a singleport 392xPlus modem.

•3800Plus modems – Provides enhanced modems with country-specific power supplies.

Release Notes Summary

In the COMSPHERE 6800 Series Network Management System Communications Product Support Command

Reference Manual (6800-A2-GB31-10), the following commands are enhanced:

•Call Detail Display (cded)

•Call Duration Distribution (cdud)

•Call Occurrence Distribution (cod)

•Change Address (cha)

•Change Call Directory (chcd)

•Change External Leads States (chels)

•Change Options (cho)

•Daily Historical Utilization (dhu)

•Dial (dial)

•Dial Mode (dm)

•Dial Standby (ds)

•Display External Leads States (dsels)

•Display Options (dso)

•Download Device Firmware (dndf)

dyn

•Identity (id)

•Make Busy (mb)

•Manage Call Statistics (mcs)

•Service Line (sl)

In the COMSPHERE 6800 Series Network Management System Core Command Reference Manual

(6800-A2-GD32-10), the following commands are enhanced:

•Create Device Profile (crdp)

•Delete Device Profile (dldp)

•Display Device Profile (dsdp)

•Edit Device Profile (eddp)

COMSPHERE 6800 Network Management System

Communication Products Support Command

Reference Manual (6800-A2-GB31-10)

The changes or modifications to the commands in this manual are described on the following pages.

•Change Address (cha)

•Change Call Directory (chcd)

•Change External Leads States (chels)

•Change Options (cho)

•Dial (dial)

•Dial Mode (dm)

•Dial Standby (ds)

•Display External Leads States (dsels)

•Display Options (dso)

•Download Device Firmware (dndf)

•Identity (id)

•Make Busy (mb)

•Service Line (sl)

The Call Statistics application functionality is not supported for the 3825Plus modem. The following is a list of

commands that are provided in this application and are affected:

•Call Detail Display (cded)

•Call Duration Distribution (cdud)

•Call Occurrence Distribution (cod)

•Daily Historical Utilization (dhu)

•Manage Call Statistics (mcs)

Change Address (cha)

This command is not executable for the 3825Plus modem. A warning box with the message Test not sent.

Test-device mismatch. appears.

Change Call Directory (chcd)

The following error message may display on the results form after executing the Change Call Directory (chcd)

command on a 3610/3611 DSU:

Invalid Duplicate Phone Number in Multiple Directories.

Change External Leads States (chels)

This command is not executable for the 3825Plus modem. A warning box with the message Test not sent.

Test-device mismatch. appears.

Change Options/Display Options (cho/dso) Commands

The following changes and additions apply to both the Change Options (cho) and Display Options (dso)

commands in support of the 3825Plus modem.

•The DTE INTERFACE Configuration Set screen contains the new selection of 28800 for the Async DTE

rate field. The DSR Control field contains the values stndrd_RS232,forced-on, winkwhen-disc,

follows_DTR, on_early, and delay_toData. The RTS action field contains the values stndrd_RS232,

ignore, and sim_cntl_car. The Backup TX clock src and the CT111 rate control fields are not displayed.

•This DIAL LINE Configuration Set screen Dial line rate field contains the values 19200(V32terbo),

16800(V32terbo), 14400(V32b), 12000(V32b), 9600(V32b), 7200(V32b), 4800(V32b), 2400(V22bis),

1200(V22), 1200(212A), 0-300(103J), 33600, 31200, 28800(V34), 26400(V34), 24000(V34), 21600(V34),

19200(V34), 16800(V34), 14400(V34), 12000(V34), 9600(V34), 7200(V34), 4800(V34), 2400(V34). The

Dial transmit level field contains the values permissive(-9), ETC1.0_Cell, ETC1.1_Cell, a value

between 0 and 32.

•The LEASED LINE Configuration Set screen Leased mode field contains the values disable, 2 wire-orig,

and 2 wire-ans. The Leased line rate field contains the values 19200(V32terbo), 16800(V32terbo),

14400(V32b), 12000(V32b), 9600(V32b), 7200(V32b), 4800(V32b), 2400(V22bis), 33600, 31200,

28800(V34), 26400(V34), 24000(V34), 21600(V34), 19200(V34), 16800(V34), 14400(V34), 12000(V34),

9600(V34), 7200(V34), 4800(V34), 2400(V34). The Autorate field contains the values disable and

enable. The Leased TX level (-dBm) field contains the values 0 to 15. The Carrier on level (–dBm) field

contains the values 43 and 26.

•The TEST Configuration Set screen Test timeout(secs) field contains the values disable and 1 to 255. The

Receive remote loop field contains the values enable and disable.

•The MISC Configuration Set screen Dir #1 callback field will not be displayed.

•The SECURITY Configuration Set screen has one new field: Callback security with the values of disable

and enable. This is a protected field.

The following changes and additions apply to both the Change Options (cho) and Display Options (dso)

commands in support of the 3610/3611 DSUs.

•The second page of the DBM Configuration Set screen displays the new field Wait for answer with the

values of 90 msec, 300 msec, 500 msec, 1 sec, 2 sec, 3 sec, 4 sec, 5 sec.

•The Backup Configuration Set screen is moved to a new screen, with all the options remaining the same.

The following changes and additions apply to both the Change Options (cho) and Display Options (dso)

commands in support of the 392xPlus singleport modems.

•Only Port 1 options will display.

Dial (dial)

This command is not executable for the 3825Plus modem. A warning box with the message Test not sent.

Test-device mismatch. appears.

Dial Mode (dm)

This command is not executable for the 3825Plus modem. A warning box with the message Test not sent.

Test-device mismatch. appears.

Autres manuels pour COMSPHERE 3610

Ce manuel convient aux modèles suivants

Autres manuels Paradyne Modem

Paradyne

Paradyne 3980-A2-GZ40-20 Fiche technique

Paradyne

Paradyne COMSPHERE 3810Plus Manuel d'exploitation et d'entretien

Paradyne

Paradyne COMSPHERE 3911 Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3800 Series Manuel du propriétaire

Paradyne

Paradyne COMSPHERE 3800 Series Manuel d'utilisation et d'entretien

Paradyne

Paradyne COMSPHERE 3800 Series Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3910 Manuel utilisateur

Paradyne

Paradyne Hotwire 7974 Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3800PLUS Manuel utilisateur

Paradyne

Paradyne Hotwire 8775 Manuel utilisateur

Paradyne

Paradyne 7984 Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3830 Manuel de l'opérateur

Paradyne

Paradyne Hotwire 7974 Manuel utilisateur

Paradyne

Paradyne Hotwire 8300 Manuel utilisateur

Paradyne

Paradyne HOTWIRE 7900 Manuel utilisateur

Paradyne

Paradyne CopperJet 810 Manuel utilisateur

Paradyne

Paradyne HOTWIRE 7925 Manuel utilisateur

Paradyne

Paradyne KeepInTouch 3760 Manuel utilisateur

Paradyne

Paradyne StormPort 610 Manuel utilisateur

Paradyne

Paradyne Hotwire 7985 Manuel utilisateur

Paradyne

Paradyne COMSPHERE 3821PLUS Manuel utilisateur

Paradyne

Paradyne Hotwire 7974 Manuel utilisateur

Paradyne

Paradyne Hotwire 5446 Manuel utilisateur

Paradyne

Paradyne 3162 Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur

Zoom

Zoom 1070 Series Manuel utilisateur