Panasonic KX-HCM280 Manuel utilisateur
Getting Started
Model No. KX-HCM280
Please read the Operating Instructions for the details.
Keep this leaflet for the future reference.
The suffix of each model number is omitted.
Network Camera
Included Accessories
The following items are provided with a Network Camera.
Notes
• If any items are missing, contact the dealer immediately.
• The order numbers listed above are subject to change without notice.
• Save the original carton and packing materials for future shipping and
transportation of the unit.
AC Adaptor—1 pc.
Order No. PSLP1242Z AC cord (Type C-7)—1 pc.
Order No. PSJA1074Z
Ceiling Mounting Cover—1 pc.
Order No. PSKL1023Z
Ceiling Plate B—1 pc.
Order No. PSMD1045Z Setup CD-ROM—1 pc.
Order No.
PSQX2871Y
Screws A—2 pcs.
Order No. XYN3+J6FY Screws B—4 pcs.
Order No. XTB4+20AFY
Ceiling Plate A—1 pc.
Order No. PSZMHCM280M
Operating Instructions
2
Network Camera Configuration Type
A Network Camera can be connected on a LAN/Intranet and the Internet. Select
one of the four Network Camera configuration types. Network parameters differ
depending on the Network Camera configuration type.
[Type 1]—LAN/Intranet Connection with an Ethernet®
Switching Hub
The Network Camera can be installed on the LAN/Intranet.
*1Network traffic can be improved by using the Ethernet switching hub.
[Type 2]—Internet Connection with a Broadband Router
The Network Camera can be accessed from the Internet. The broadband router
needs Port Forwarding (IP Masquerade) feature on page 32 in the Operating
Instructions.
LAN/Intranet Ethernet switching hub*1
Modem Broadband
Router
CATV
xDSL
Optical cable
Internet WAN LAN
Operating Instructions
3
[Type 3]—Internet Direct Connection with a Modem
The Network Camera can be installed alone without PC on the network. When you
set up a Network Camera in [Type 3], connect it temporarily in [Type 1], [Type 2]
or [Type 4].
Note
Some xDSL services use PPPoE. The Network Camera does not support
PPPoE. If the Internet connection requires PPPoE, connect with the
broadband router supporting PPPoE like [Type 2].
[Type 4]—Direct Connection with a PC
The Network Camera can be connected to a PC directly.
Note
Use a category 5 cross cable when connecting directly with the cable to the
PC.
Modem
Internet
Category 5 cross cable
Operating Instructions
4
How to turn on the Network Camera for Installation
The Network Camera powers up when connecting AC plug to the power outlet.
Notes
• Do not hold or touch the Pan/Tilt as it starts moving when connecting AC
plug to the power outlet.
• AC adaptor is used as the main disconnect device, so ensure that the
power outlet is located/installed near the equipment and is easily
accessible.
• Use only specified Panasonic AC adaptor PSLP1242 (Order No.
PSLP1242Z).
• When you set up a Network Camera in [Type 3], connect it temporarily in
[Type 1], [Type 2] or [Type 4].
• When Indicator is orange, confirm that the Ethernet cable is properly
connected, or the PC, Ethernet hub or broadband router is properly
working.
External I/O
Ethernet port
AC cord
To Network
Category 5 straight/cross cable
Connect the DC plug of the
AC adaptor to the DC IN jack.
Hook the AC adaptor cord
to the Hook for AC Adaptor.
Connect the AC cord
to the AC adaptor. Connect the AC plug
of the AC cord to
the power outlet.
2)
1)
4)
Connect a category 5
straight/cross cable
to the Ethernet port.
3)
5)
Power Outlet
Hook for AC Adaptor
DC IN jack
Operating Instructions
5
Network Parameters
Preparing the Network Parameters for the Network Camera
Before starting to set up the network parameters of a Network Camera, make note
of corresponding network parameters.
Refer to page 6 in this Getting Started and page 23 in the Operating Instructions
for network parameters.
Network parameters memo for Network Camera
The devices on the network may not be assigned the same IP address. Each
device must have its own IP address. Overlapped IP addresses can cause other
network devices to stop working and may result in widespread network problems.
[Type 1] Ask your network administrator for the network parameters.
[Type 2] Refer to the broadband router’s manual for the network parameters.
[Type 3] Ask your ISP (Internet Service Provider) for the network parameters.
[Type 4] Install the Network Camera in the default condition. Set the PC
"192.168.0.250" (IP address) and "255.255.255.0" (Subnet Mask).
Refer to page 24 in the Operating Instructions.
Default Gateway
. . . DNS Server 1 . . .
IP Address . . .
DNS Server 2 . . .
Subnet Mask . . .
Operating Instructions
6
Network Parameters Table
*1Many ISP's intentionally block the port number 80 to guard against network
viruses. If your ISP blocks the port number 80, substitute it to another unused
port number.
*2When you use more than one Network Camera with a broadband router, each
Network Camera needs its own port number.
*3The Port Forwarding (IP Masquerade) feature needs to be set to the
broadband router. Refer to page 32 in the Operating Instructions.
*4Refer to the broadband router's manual.
*5
When you use a Network Camera in DHCP feature, check [DHCP] and enter
the Host Name if your ISP requires. If you automatically get the address of
Default Gateway and DNS server from DHCP server, you do not need to set up.
*6
Verify that your ISP supports DHCP. If your ISP supports DHCP, or if you assign a
domain name to the Network Camera, you need to contract and register for DDNS
service. If you set a static global IP address to the Network Camera and the
broadband router, you do not need to register for DDNS service. Refer to page 34
in the Operating Instructions
.
It can restrict the transmit bandwidth.
Select from 0.1 to Unlimited Mbit/s.
Max.
Bandwidth
Usage
Parameters
Network Camera ConfigurationType
Port No.
IP address
Subnet
Mask
Default
Gateway
DNS
Server 1, 2
DDNS
Check [Static],
and set the
static private
IP address.
192.168.0.253
(default)
255.255.255.0
(default)
Check [Static],
and set the
static global
IP address.*5
Check [Static],
and set the
static private
IP address.*4
Set Default
Gateway
address.
You do not
need to set up.
Set DNS server address.
[Type 1] [Type 2] [Type 3] [Type 4]
Set Default
Gateway
address.*5
Set DNS server
address.*5
Set the private
IP address of the
broadband router
(on your network),
not of the gateway
of your ISP.*
4
80 (default)*1
80 (default) 80 (default)
Set the Subnet Mask fitted to your network.
You do not
need to setup. You do not
need to setup.
*6*6
80 (default)
*1*3
*2
Operating Instructions
7
Proxy Server Setting
A proxy server may prevent you from connecting directly to a Network Camera in
some corporate environments. The web browser can set up the IP address
communication without using a proxy server. Consult your ISP or network
administrator.
Note
A proxy server is generally used to protect security of a network that offers an
Internet connection. The network of a Network Camera with the proxy server
may cause some problems to the image quality such as taking much time in
refresh interval. Consult your ISP or network administrator for details.
1. Start up the Internet Explorer. (The window comes from Internet Explorer
5.50.)
2. Select [Tools] –> [Internet Options...] –> [Connections] tab and click [LAN
Settings]. See if the Use a proxy server check box is checked or not in the
next window. When checked, click [Advanced...].
When not checked, click [Cancel]. Your proxy settings are causing no
problems.
See if the check
box is checked or not.
When checked, click
[Advanced...].
Operating Instructions
8
3. Enter an IP address for the Network Camera assigned from your ISP or
network administrator into the Do not use proxy server for addresses
beginning with data field.
4. Click [OK] on all of the opening windows.
Operating Instructions
9
Simple Installation using the Setup CD-ROM
After finishing cabling, turn on the Network Camera and insert the Setup CD-ROM
in the CD-ROM drive of the PC. Setup CD-ROM should start the application
automatically. This program automatically finds Network Cameras on the network.
1. Turn on the Network Camera.
2. Insert the Setup CD-ROM in the CD-ROM drive of the PC.
(If Network Camera Setup window does not appear, click "setup.exe" on the
Setup CD-ROM.)
Operating Instructions
10
3. Click [Network Configuration]. Network Camera List window appears. The
Setup program finds all Network Cameras connected on your local network. It
lists all of MAC addresses and IP addresses of Network Cameras. Network
Cameras that are isolated by the use of a home gateway or broadband router
will not be detected. Record their MAC addresses on the Network Camera
Memo on page 3 in the Operating Instructions. It is useful for customer
servicing.
Notes
• The setup program finds and identifies Network Cameras by listening for
data, which the Network Cameras send out for the first 20 minutes after
powering up. If the installation is not completed within 20 minutes,
disconnect temporarily the AC adaptor to restart this operation.
• Each Network Camera has a unique MAC address labelled on the bottom.
Refer to page 15 in the Operating Instructions.
• Network Cameras that are isolated by the use of a home gateway or
broadband router will not be detected.
(A)
Autres manuels pour KX-HCM280
3
Table des matières
Autres manuels Panasonic Caméra de sécurité
Panasonic
Panasonic KX-HNB700 Manuel utilisateur
Panasonic
Panasonic WV-SPW631LT Manuel utilisateur
Panasonic
Panasonic WV-SW559 Manuel utilisateur
Panasonic
Panasonic WV-CLR920A Manuel utilisateur
Panasonic
Panasonic WV-CP290/G Manuel utilisateur
Panasonic
Panasonic WVNP472 - COLOR CCTV CAMERA Manuel utilisateur
Panasonic
Panasonic WVBS304 - UNITIZED CAMERA Manuel utilisateur
Panasonic
Panasonic i-Pro WV-SP102 Manuel utilisateur
Panasonic
Panasonic VL-CM851BX Manuel utilisateur
Panasonic
Panasonic EggCam GP-KR001 Manuel utilisateur
Panasonic
Panasonic WV-SF330 Series Manuel utilisateur
Panasonic
Panasonic WV-SFV781L Manuel utilisateur
Panasonic
Panasonic WV-SFV481 Manuel utilisateur
Panasonic
Panasonic WV-CZ362E Manuel utilisateur
Panasonic
Panasonic WV-SW458 Manuel utilisateur
Panasonic
Panasonic WV-SW396 Manuel utilisateur
Panasonic
Panasonic WVCL830 - COLOR CAMERA Manuel utilisateur
Panasonic
Panasonic BL-WV10A Manuel utilisateur
Panasonic
Panasonic WV-S2231L Manuel d'utilisation
Panasonic
Panasonic i-Pro WV-SFN130PJ Manuel utilisateur
