Panasonic CV-CFW103L Manuel utilisateur

HD Analog Camera

User's Manual

Model No. CV-CFW103L

CV-CFW103LN

Version 1.0.0

Table of Contents

1General Introduction ..................................................................................................................1

1.1 Overview........................................................................................................................1

1.2 Features.........................................................................................................................1

1.3 Functions .......................................................................................................................1

1.4 Specifications................................................................................................................2

2Framework and Dimensions.....................................................................................................3

3Installation....................................................................................................................................5

Welcome

Thank you for purchasing our HD analog camera!

This user’s manual is designed to be a reference tool for your system.

Please read the following safeguard and warnings carefully before you use this series product!

Please keep this user’s manual well for future reference!

iii

Important Safeguards and Warnings

1．Electrical safety

All installation and operation here should conform to your local electrical safety codes.

The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited

power source is rated 12V DC in the IEC60950-1.

We assume no liability or responsibility for all the fires or electrical shock caused by improper handling

or installation.

2．Transportation security

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and

installation.

3．Installation

Do not apply power to the camera before completing installation.

Please install the proper power cut-off device during the installation connection.

Always follow the instruction guide the manufacturer recommended.

If this product is installed in the ceiling, please make sure the installation position can sustain the min

50N.

4．Qualified engineers needed

All the examination and repair work should be done by the qualified service engineers.

We are not liable for any problems caused by unauthorized modifications or attempted repair.

5．Environment

This series HD analog camera should be installed in a cool, dry place away from direct sunlight or

strong light, inflammable, explosive substances and etc.

This series camera shall work on the specified working temperature. Please keep it away from the

electromagnetic radiation object and environment.

Please make sure the CMOS component is out of the radiation of the laser beam device. Otherwise it

may result in CMOS optical component damage.

Please keep the sound ventilation.

Do not allow the water and other liquid falling into the camera.

6．Accessories

Be sure to use all the accessories recommended by manufacturer.

Before installation, please open the package and check all the components are included.

Contact your local retailer ASAP if something is broken in your package.

7．Daily Maintenance

Please shut down the device and then unplug the power cable before you begin daily maintenance

work.

Use the dry soft cloth to clean the device.

If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean

the device. Finally use the dry cloth to clean the device.

Please put the dustproof cap to protect the CMOS component when you do not use the camera.

1General Introduction

1.1 Overview

This series HD analog camera conforms to the HDCVI standard. It supports video signal high-

speed long distance transmission without any delay. It can be controlled by the DVR conforming

to the HDCVI.

1.2 Features

High-performance CMOS image sensor, megapixel definition.

Support 720p@25fps(PAL) /30fps (NTSC)

Support HDCVI video output.

Support 75-3 coaxial cable transmission over 800m.

High speed, long distance real-time transmission.

Support ICR switch to realize surveillance both in the daytime and at night.

Support auto exposure, auto white balance, auto electronic shutter and auto gain function.

High image color rendition, vivid image.

Support DC12V power supplying.

Support IP66 compliance.

Support intelligent IR function. max IR distance 30m.

1.3 Functions

HDCVI Specification

HDCVI（High Definition Composite Video Interface）is an over-coaxial –cable HD video

transmission standard. The technology renders two HD video formats by progressive scanning.

ICR

The IR cut removal is to filter the IR light in the daytime and then auto switch to the general fitter

at night. This function allows the camera to output the high sensitivity and clear video.

Smart IR technology

The sensor controls the IR light on/off via the combination work of the hardware and software,

which realizes the automatically IR light compensation according to the environment illumination.

Auto gain function

To output the standard video signal in the different illumination environments, the amplifier needs

to adjust in a wide range. The system can enhance the camera sensitivity in low illumination and

enhance the video signal output to get the clear and high definition video.

Auto white balance

The white balance refers to the camera to restore the white object color. It allows the camera to

automatically adjust the color temperature in indoor and outdoor environment, just like our human

eyes does.

Auto exposure

System can automatically set shutter speed and iris value according to the snapshot video

exposure condition.

Auto electronic shutter

The system can automatically adjust the electronic shutter when the environment light changes.

1.4 Specifications

Parameter

CV-CFW103L

CV-CFW103LN

Camera

Image Sensor

1/2.9" 1.0 Mega Pixels CMOS

Effective Pixels

1280 (H) × 720 (V)

Min Illumination

0.05Lux/ F1.6, 0Lux IR on

Electronic Shutter

1/50s~1/100,000s

1/60s~1/100,000s

Video Frame Rate

25fps

30fps

Synchronization

Internal

Day & Night

Auto (ICR)/ Color/ B/W

Max IR Distance

30m

Digital Noise Reduction

White Balance

Auto

AGC

Auto

BLC

Auto

Lens

Focal Length

3.6 mm

Angular Field of View

H: 88 V: 46

Lens Type

M12

Input / Output

Video Output

1 CH BNC HD-CVI video output

General

Power

DC 12V±25%

Power Consumption

2.5W MAX

Working Temperature

-30℃~+60℃.

Less than 95% RH (no condensation)

Dimensions

Φ93.4 mm × 79.7 mm

Weight (approx.)

350g

Installation Mode

Wall mount/ In-ceiling mount

External Case

Metal

2Framework and Dimensions

Please refer to the following figures for dimension information. The unit is mm. See Figure 2-1

and Figure 2-2.

Figure 2-1

Figure 2-2

Please refer to the following sheet for detailed information.

Name

Function

Power input port

Connect to the DC 12V power to input the power.

Video output port

BNC port is to output HDCVI video signal.

You can connect to the devices such as the DVR or the NVS conforming to the

HDCVI specifications.

Installation base

Device installation base

Rotate base

Adjust the rotate base to adjust the monitor angle.

Panel cover

Adjust the panel cover to adjust the monitor angle.

Dome Body

Adjust the dome body to adjust monitor angle.

IR light

It is to send out the IR compensation light to enhance the night vision.

Lens

It is to receive the optical signal from the environments.

3Installation

Important

Please make sure the installation surface can min support the 3X weight of the camera and

the bracket.

The dome camera usually uses the ceiling installation. It can be installed on the ceiling or the wall.

Step1 Device Installation

Take the hex key from the accessories bag and use it to loosen the three set screws on the side

of the camera body. See Figure 3-1.

Figure 3-1

Step 2 Pedestal Installation

Turn the pedestal of the device and then pull the cable through it. Use four screws to secure the

pedestal to the proper position. See Figure 3-2.

Figure 3-2

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Panasonic Caméra de sécurité

Panasonic

Panasonic WV-CW374 Manuel utilisateur

Panasonic

Panasonic BB-HCM511A Manuel utilisateur

Panasonic

Panasonic WV-NF302E Manuel utilisateur

Panasonic

Panasonic WV-U2500 Series Manuel utilisateur

Panasonic

Panasonic WV-SUD638 Manuel utilisateur

Panasonic

Panasonic KX-HNC710W Manuel utilisateur

Panasonic

Panasonic KX-TGA914E Manuel utilisateur

Panasonic

Panasonic WVCS574 - COLOR CCTV CAMERA Manuel utilisateur

Panasonic

Panasonic AWE300S - SEPERATE CAMERA Manuel utilisateur

Panasonic

Panasonic Super Dynamic III WV-CW960 Manuel utilisateur

Panasonic

Panasonic BL-C30C Manuel utilisateur

Panasonic

Panasonic WV-CLR920A Manuel utilisateur

Panasonic

Panasonic WVNS954 - NETWORK CAMERA Manuel utilisateur

Panasonic

Panasonic KX-HCM250 Manuel utilisateur

Panasonic

Panasonic BL-C10 Manuel utilisateur

Panasonic

Panasonic BL-C30A - Wireless 802.11 b/g Network Camera Manuel utilisateur

Panasonic

Panasonic WV-SW316 Manuel utilisateur

Panasonic

Panasonic BB-HCM715 Manuel utilisateur

Panasonic

Panasonic WV-SW395 Manuel utilisateur

Panasonic

Panasonic OneHome KX-HCM110A Manuel utilisateur

Panasonic

Panasonic WV-SFV631L Manuel d'utilisation

Panasonic

Panasonic BL-C10A - Network Camera - Pan Manuel utilisateur

Panasonic

Panasonic VL-SDM200A Manuel utilisateur

Panasonic

Panasonic GP-US932CA Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur