Panasonic KV-S6055W Manuel utilisateur

ORDERNO. KM70104624C0

G14

High SpeedScanner

KV-S6055W/ KV-S6055WU/ KV-S6050W/ KV-S6050WU

1. GENERALPRECAUTIONS

1.1. SafetyPrecautions

1. Beforeservicing, unplug thepowercordtopreventelectrical

shock hazard.

2. Whenreplacing parts, use onlymanufacturer’srecommended

components forsafety.

3. Check thecondition ofpowercord. Replace ifwearorifdamageis

evident.

4. Afterservicing, besuretorestoretheleaddress, insulation

barriers, insulation papers, shields, etc.

5. Beforereturning theservicedequipmenttothecustomer, perform

thefollowing electrical tests topreventashock hazard.

1.2. Electrical Tests

1. Unplug thepowercordand check forcontinuitybetweentheearth

ground connection on theplug and themetal cabinet. There

shouldbezeroohmresistance found.

2. Withtheunitunplugged, shorttheACLive-Neutral oftheplug with

ajumperwire.

3. TurnONthepowerswitch.

4. Measuretheresistance valuewithanohmmeterbetweenthe

jumperedACplug and eachexposedmetal cabinet part, suchas

screwheads, etc.

Note:

Someexposedparts maybeisolatedfromthechassisbydesign.

Theyreadinfinity.

5. Ifthemeasurementisless than1M , apossibilityforelectric

shock mayexit.

Note:

Thishazardouscondition must becorrectedbeforetheunitis

returnedtotheend user.

1.3. ForService Technicians

ICsand LSIsarevulnerabletostaticelectricity.

Whenrepairing, thefollowing precautionswill helptopreventrecurring malfunctions.

1. Covertheplasticparts withaluminumfoil.

2. Ground thesoldering irons.

3. Use aconductivemat on theworktable.

4. DonotgraspICorLSI pinswithbarefingers.

2. SPECIFICATIONS

Item Model No.

KV-S6050W

KV-S6050WU

KV-S6055W

KV-S6055WU

Scanner Scanning face Simplex scanning Duplex scanning

Scanning method ADFfrontside/Flatbed:CCD

imagesensor

ADFfrontside/Flatbed:

CCD

imagesensor

ADFback side:CIS

(ContactTypeImage

Sensor)

Readout

speed

Flatbed 1.5sec (1paper, lettersize, 200 dpi)

ADF Simplex scanning :Approx. 55 ppm.

(Letter, fedlengthwise, 200 dpi)

Duplex scanning :Approx. 82 ipm.

(KV-S6055W(U) only)(Letter, fedlengthwise, 200 dpi)

Resolution Flatbed/

ADF

Mainscanning direction :100~600 dpi (1dpi step)

Sub-scanning direction :100~600 dpi (1dpi step)

Optical resolution is400 dpi.

Tonal gradation Binarymode, Grayscalemode(4/8bit), 64-stepgradation, (

dither)

mode, 64-stepgradation (error diffusion)mode

Imagecontrol Imageemphasis, Dynamicthreshold(DIMM required),

Automatic

threshold, Automaticseparation, Monochromereversing,

Automaticback control

Paper Sizefor

Flatbed

~298x432mm (11.7x17 in.)

Sizefor

ADF

Scanning size

70x169mm (2.8x6.7in.), and

106x148mm (4.2x5.8in.)to298x432mm (11.7x17 in.)

Feeding size

70x169mm (2.8x6.7in.), and

106x148mm (4.2x5.8in.)to305x432mm (12x17 in.)

Thickness

for ADF

Singlepaperfeeding :0.05 to0.15mm (2.0to5.9mils)

Continuouspaperfeeding :0.06 to0.15mm (2.4to5.9mils)

Note:1mil=1/1000 in.

Weight

for ADF

Singlepaperfeeding :40 to127g/m2(10.6to34 lbs.)

Continuouspaperfeeding :50 to127g/m2(13 to34 lbs.)

Interface (Transferrate) SCSI3(20MB/sec)

Hoppercapacity 200 sheets[64g/m2 (17 lbs.)un usedpaper]

Item Model No.

KV-S6050W

KV-S6050WU

KV-S6055W

KV-S6055WU

Unit External dimensions

(WidthxDepthxHeight)

464x717x296mm (18.3x28.2x11.7in.)

Mass (Weight) 30kg(66 lbs.)

Powerrequirement AC100-120V, 50/60Hz(KV-S6050W/S6055W)

AC220-240V, 50/60Hz(KV-S6050WU/S6055WU)

Power

consumption

Maximum

(Scanning)

1.8A(KV-S6050W/S6055W)/135W

1.0A(KV-S6050WU/S6055WU)/135W

Minimum

(Standby)

0.5A(KV-S6050W/S6055W)/35W

0.3A(KV-S6050WU/S6055WU)/35W

Sleep

mode

0.13A(KV-S6050W/S6055W)/11W

0.07A(KV-S6050WU/S6055WU)/11W

Operating

Environment

Operating temperature

and humidity

15°Cto30°C(59°Fto86°F), 30%to80%RH

Storage

Environment

Storagetemperature

and humidity

0°Cto35°C(32°Fto95°F), 10%to80%RH

Option Rollerexchangekit(KV-SS044), Imprinterunit(KV-SS010), Redlampoption (KV-

SS045),

Rollercleaning paper(KV-SS03), lnkcartridge(KV-SS06), Whiteroller&Cover(KV-

SS049)

“Weightinpounds”ofpaperrepresentstheweightof500 [432x559mm (17x22 inches)] sheets.

“Theredlampoption (KV-SS045)mustbeinstalledbyatrainedservice engineer.

3. COMPONENTIDENTIFICATION

4. INSTALLATION

4.1. MinimumSpace Requirements

Besuretomaintaintherecommendedspace requirementsfor properventilation.

4.2. Removing and keeping Metal Clamp

Inordertoensurethescanner’ssafetywhileitisbeing transported, itsoptical unitissecuredby

ametal clamp. Once thescannerhas beenputintheplace whereitistobeinstalled, changethe

position ofthemetal clampbyfollowing thestepsoutlinedbelow.

(1)Place thescannerissuchaway thatitsleft area protrudes byabout15cm (5.9”)from the

edgeofatable.

-Donotturnitupsidedownorstand iton its side.

-Whenplacing thescanneron atable, becareful nottoextend

beyond theedge15cm(5.9”). Otherwise, thescannermayfall.

(2)Remove themetal clampon thebottom ofthescannerfrom position (A)and attachitat

position (B) instead.

4.3. DIMM ModuleExtension

Amaximum of256 MBextendedmemorymay berequireddepending on thecombination ofthe

papersize, resolution and gray scalemode.

(For example, toscanatwo-sidedA4sizedocumentwith600 dpi, gray, etc.)

Todeterminehowmuchextendedmemoryisrequired, refertothesection 4.6.1“Additional

MemorySizeeachscanning mode(MB)”.

*RecommendedDIMM

-JEDEC-standard168pin, dual in-linememorymodule(DIMM)

-Non buffered

-Single+3.3V±0.3Vpowersupply

-Frequency/ CASLatency:100MHz/CL=2, 133MHz/CL=2, 133MHz/CL

-64MB, 128MBor256MBmaybeused.

(Reference)DIMM modulewhichhas beenevaluatedusing thisscanner

-Manufacturer:DELKINDEVICES

1. Model No.:DM168-064Y3Q488-10S2P(64MB)

2. Model No.:DM168-064Y3Q446-10S2P(64MB)

3. Model No.:DM168-128Y3Q488-10S4P(128MB)

Note:

Originally, SCSI boardhas 16MBmemoryexceptfortheabove

additional memory.

4.4. Removing SCSI Board

1)Make surethePowerisOFF.

2)Remove SCSIBoard. (See 8.4.2.)

4.5. Installing DIMM Module

InserttheDIMM moduleintotheconnector on the

SCSIinterface board atanangle[Place (1)]. Push

inthemoduleas faras itgoes. Theleversshould

lock automatically. Ifnot, pushtheleverstolock the

modulein[Place (2)].

Note:

-BesurethattheDIMM modulewill beintheproper

position and theproperside.

-Toremove theDIMM module, release thewhite

leversatbothsides oftheconnector.

4.6. Installing theSCSI Board

1)InserttheSCSIBoard intotheunitalong the

guides and pushitinfirmly.

2)SecuretheSCSIBoard withthe3screws.

3)Install thescannerdriversoftwareinyour

computeraccording totheenclosedmanuals.

4.6.1. Additional MemorySizeeachscanning mode(MB)

Simplex/4bit, 8bit

Size Resolution (dpi)

100 200 300 400 500 600

A3 0 0 64 64 64 128

A4 0 0 0 0 64 64

A5 0 0 0 0 0 64

A6 0 0 0 0 0 0

B4(JIS) 0 0 0 64 64 64

B5(JIS) 0 0 0 0 64 64

B6(JIS) 0 0 0 0 0 0

DoubleLetter 0 0 64 64 64 128

Legal 0 0 0 64 64 64

Letter 0 0 0 0 64 64

Duplex/4bit, 8bit

Size Resolution (dpi)

100 200 300 400 500 600

A3 0 0 64 64 128 256

A4 0 0 64 64 64 128

A5 0 0 0 0 64 64

A6 0 0 0 0 0 64

B4(JIS) 0 0 64 64 128 128

B5(JIS) 0 0 0 64 64 64

B6(JIS) 0 0 0 0 64 64

DoubleLetter 0 0 64 64 128 256

Legal 0 0 64 64 64 128

Letter 0 0 64 64 64 128

Simplex/Binary

Size Resolution (dpi)

100 200 300 400 500 600

A3 0 0 0 0 0 0

A4 0 0 0 0 0 0

A5 0 0 0 0 0 0

A6 0 0 0 0 0 0

B4(JIS) 0 0 0 0 0 0

B5(JIS) 0 0 0 0 0 0

B6(JIS) 0 0 0 0 0 0

DoubleLetter 0 0 0 0 0 0

Legal 0 0 0 0 0 0

Letter 0 0 0 0 0 0

Duplex/Binary

Size Resolution (dpi)

100 200 300 400 500 600

A3 0 0 0 0 0 64

A4 0 0 0 0 0 0

A5 0 0 0 0 0 0

A6 0 0 0 0 0 0

B4(JIS) 0 0 0 0 0 0

B5(JIS) 0 0 0 0 0 0

B6(JIS) 0 0 0 0 0 0

DoubleLetter 0 0 0 0 0 64

Legal 0 0 0 0 0 0

Letter 0 0 0 0 0 0

4.7. Connecting theUnittoaPersonal Computer

4.8. SystemConditionsRequirements

Whenusing thescanner, therequiredpersonal computerconditionsareas follows.

CPU Pentium 166MHzor higher(Pentium, Celeron processor or higheris

recommended.

Memory 64 MBor higher(128 MBor higherisrecommended.)

OS Windows95/Windows98/WindowsNT/Windows2000/WindowsMe

SCSIboard Adaptec Brand AHA-1540/2930/2940/19160/29160 Series are

recommended.

*Thescanning speeddiffersdepending on thepersonal computeroperating environmentor

application.

4.9. LCD Settings

Beforescanning thedocument, perform thepreferredsettingson thedisplay. Setting information

and scannerconditionsareshownon thedisplay.

4.9.1. Setting thelanguage

1. Turnthepoweron whilepressing theHOMEkey.

Note:

Thelanguagesetting modeisselectedautomaticallywhenthe

scanner’spoweristurnedon forthefirst timeafterthescanner

was purchased.

2. Use the[ ]keyor[ ]keytoselect the“EnglishLetter”,

“EnglishA4”or“DeutschA4”, “ A4”.

3. Press theHOMEkey.

-Thedisplaywill changetotheselect language, thenthe

scannerwill beready.

Autres manuels pour KV-S6055W

Ce manuel convient aux modèles suivants

Autres manuels Panasonic Scanner

Panasonic

Panasonic Workio KV-S7065C Manuel utilisateur

Panasonic

Panasonic KV-SS25D Manuel utilisateur

Panasonic

Panasonic KV-S7097 Manuel d'installation et d'exploitation

Panasonic

Panasonic KV-S3105C Manuel utilisateur

Panasonic

Panasonic KV-SL1066 M2 Manuel utilisateur

Panasonic

Panasonic KV-S1058Y Manuel utilisateur

Panasonic

Panasonic KV-S7075C Manuel utilisateur

Panasonic

Panasonic KV-S6040W - Document Scanner Manuel utilisateur

Panasonic

Panasonic KV-S5076H Manuel utilisateur

Panasonic

Panasonic KV-S3085 Manuel utilisateur

Panasonic

Panasonic KV-S5055C Manuel utilisateur

Panasonic

Panasonic KV-S2046C Manuel utilisateur

Panasonic

Panasonic KV-SS855D Manuel utilisateur

Panasonic

Panasonic Workio KV-S7065C Manuel utilisateur

Panasonic

Panasonic KV-S2055L Manuel utilisateur

Panasonic

Panasonic KV-N1058X Manuel utilisateur

Panasonic

Panasonic KV-S1045C Manuel utilisateur

Panasonic

Panasonic KV-SS855 Manuel utilisateur

Panasonic

Panasonic KV-S1065C Manuel utilisateur

Panasonic

Panasonic KV-S6055W Manuel utilisateur

Panasonic

Panasonic KV-N1028X Manuel utilisateur

Panasonic

Panasonic KV-S2048C Manuel utilisateur

Panasonic

Panasonic KV-S2048C Manuel utilisateur

Panasonic

Panasonic KV-S2065L Manuel utilisateur

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

Fujitsu

Fujitsu FI-4860C2 Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Fujitsu

Fujitsu fi-4860C Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Fujitsu

Fujitsu CardMinder Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur