Panasonic CZ-CAPWFC1 Manuel utilisateur

Contents

Safety Precautions ...................................... 2

System Overview......................................... 5

Parts Identication ...................................... 6

Parts.............................................................. 7

Dimensions .................................................. 7

WLAN Adaptor Installation ......................... 8

Connecting Network.................................. 11

Use the “Panasonic Comfort Cloud”....... 18

WLAN Adaptor Q & A ................................ 27

Firmware Update Function ....................... 29

Software License Information .................. 29

Specications ............................................ 36

USER’S MANUAL

WLAN Adaptor

Model No. CZ-CAPWFC1

Panasonic Corporation

1006 Kadoma, Kadoma City, Osaka, Japan

Panasonic Corporation

http://www.panasonic.com

POWER

LINK

RESET

SETUP

F1218-11218

ACXF60-34441

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before using this product, and save this

manual for future use.

1_WLAN Adaptor_CZ-CAPWFC1_En.indd 1 2018/12/27 18:13:47

Please Read Before Starting

These instructions are all you need for most installation sites and maintenance

conditions. If you require help for a special problem, contact our sales/service outlet or

your certied dealer for additional instructions.

The English text are the original instructions. Other languages are translations

of the original instructions.

Safety Precautions

We assume no responsibility for accidents or damages resulting from methods other

than those described in the USER’S MANUAL or methods without using specied parts.

Malfunctions that occur due to the unauthorised installation methods are not covered

by the product warranty.

●

This WLAN Adaptor shall be installed in accordance with National Wiring Regulations.

●Read the installation instructions of devices to be connected as well.

●When relocating or repairing this WLAN Adaptor, provide the USER’S MANUAL to

the servicing personnel.

●Please provide this USER’S MANUAL to the user after installation.

Instruct user to keep it in a safe place along with the air conditioner instruction

manuals.

WARNING This symbol refers to a hazard or unsafe practice which can result in

severe personal injury or death.

CAUTION This symbol refers to a hazard or unsafe practice which can result in

personal injury or product or property damage.

Precautions for Installation setup and WLAN Adaptor

WARNING

zTurn off the circuit breaker of the units before installation.

zSelect an installation location which is rigid and strong enough to

support or hold the WLAN Adaptor, and select a location for easy

maintenance.

zUse only the parts specied by Panasonic as supplied

accessories.

zEnsure cables are installed properly so that external forces cannot

affect them.

zDisassembly and modication of the WLAN Adaptor is not

permitted under any circumstances.

1_WLAN Adaptor_CZ-CAPWFC1_En.indd 2 2018/12/27 18:13:47

WARNING

zThe WLAN Adaptor must be installed by the sales dealer or

installer.

zWhen installing the WLAN Adaptor, use appropriate protective

equipment and tools for safety.

zThe WLAN Adaptor should be securely installed in accordance

with the USER’S MANUAL.

zElectric work must be performed by authorised personnel in

accordance with the local regulations and the instructions detailed

in the USER’S MANUAL.

zTo avoid malfunctions caused by radio wave interference, keep the

WLAN Adaptor away from devices such as other wireless device,

microwaves and the device that use 2.4 GHz signal. Depending on

the area, the module may not be available.

zAttach the electrical cover to the indoor unit securely.

zMake sure to connect the WLAN Adaptor to the P.C. board and

terminal board of the indoor unit properly.

zDo not set up in hospitals or places where electronic medical

devices are located.

zIf you have a cardiac pacemaker or implantable cardioverter

debrillator, please keep at least 15 cm away from the WLAN

Adaptor.

zDo not use the WLAN Adaptor near to automatic control

equipment (automatic door, re alarms, etc.).

zIn case of an abnormal condition (such as a burning smell), stop

the indoor unit and turn the breaker OFF.

zDo not operate with wet hands.

zDo not splash water on the WLAN Adaptor or use it in the

bathroom.

1_WLAN Adaptor_CZ-CAPWFC1_En.indd 3 2018/12/27 18:13:48

CAUTION

zGround yourself to discharge static electricity before performing

any wiring.

zDo not install the WLAN Adaptor in places with direct sunlight or

where the ambient temperature is 55 ˚C or more or is 0 ˚C or less.

zThe connecting cable must not touch piping directly.

zDo not set up where children can reach the WLAN Adaptor.

zDo not stand on an unstable surface when operating or checking

the WLAN Adaptor.

zDo not use in special environments.

Use in places with much oil (including machine oil), steam,

ammable or corrosive gas, voltage uctuation, surrounding the

metal body, may lead to severe decrease in functionality and

damage to parts.

zDo not use the WLAN Adaptor nearby other wireless devices,

microwaves, cordless phones, or facsimiles.

zThis equipment is not suitable for use in locations where children

are likely to be present.

zThis appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety. Children should be supervised

to ensure that they do not play with the appliance.

This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

1_WLAN Adaptor_CZ-CAPWFC1_En.indd 4 2018/12/27 18:13:48

NOTE

●Install the WLAN Adaptor vertically or horizontally.

●When attaching the WLAN Adaptor, be sure to use the supplied screws and

conrm that the WLAN Adaptor is xed to the surface so that there are no gaps.

●The warranty does not cover the product if it falls from an elevated location.

●The WLAN coverage must include the air conditioner installation location.

●Please write down the model information and more on the last page “Setting

Information”, when you install the WLAN Adaptor.

●Requires a smartphone or tablet that is iOS/Android compatible.

● Please ensure that the Router supports the WPA2-PSK (TKIP/AES) encryption

setting before commencement of the installation of this WLAN Adaptor.

●To complete connection of this WLAN Adaptor to the wireless network service the

Router may be required.

●The End user should read and accept the Terms of use and Privacy Notice in the

contents of “Panasonic Comfort Cloud” app.

●Please avoid to set up multiple WLAN Adaptor registrations at the same time.

●There is a risk of unauthorised operation if a vulnerable password is set for the

wireless router.

●Users are responsible for all costs associated with downloading and using the

Comfort Cloud App and WLAN Adaptor, including without limitation all fees

charged by your Device carrier and internet service provider and any other WLAN

or data access charges.

●Panasonic WLAN Adaptor is designed for communication to the “Panasonic

Comfort Cloud”.

●Third party WLAN interfaces cannot be connected to the “Panasonic Comfort

Cloud”.

●Updates to the service may mean there are changes to the design of the

“Panasonic Comfort Cloud” app screen and display.

System Overview

POWER

LINK

RESET

SETUP

Indoor unit (example: 4-way cassette)

WLAN Adaptor

CZ-CAPWFC1

Wireless

LAN

Router

Internet

Wired remote

controller

Smartphone

1_WLAN Adaptor_CZ-CAPWFC1_En.indd 5 2018/12/27 18:13:48

Parts Identication

POWER

LINK

RESET

SETUP

No Item Description

1POWER LED

(green)

Indicates that the WLAN Adaptor is being supplied with

power.

On : Power being supplied

Off : No power being supplied

2LINK LED (green)

Indicates the communication status of the WLAN Adaptor

to the router.

Off : Not connected to router

Blinks : In the process of connecting with router

On : Connected to router

The LINK LED does not light if the WLAN Adaptor cannot

connect with a router.

The following are cases with special LED indications.

●When SETUP button is pressed and held

The LED blinks to indicate how much time has elapsed.

Blinks once after 5 seconds have elapsed

Blinks twice after 10 seconds have elapsed

Blinks three times after 15 seconds have elapsed

Blinks four times after 20 seconds have elapsed

Blinks ve times after 25 seconds have elapsed

Blinks six times after 30 seconds have elapsed

Lights constantly after 35 seconds have elapsed

●When operating in WPS mode

Blinks at 1.0-second intervals

●When operating in AP mode

Blinks at 0.5-second intervals

1.0-second interval

0.5-second interval

1_WLAN Adaptor_CZ-CAPWFC1_En.indd 6 2018/12/27 18:13:48

No Item Description

3 RESET button* Resetting the hardware

Use to restart the WLAN Adaptor.

4 SETUP button* Used when making network settings.

Refer to “Connecting Network” (Page 11) for details.

5Communication

lines (L=1.9 m)

These are the communication lines connecting the indoor

units and the WLAN Adaptor.

Refer to “WLAN Adaptor Installation” (Pages 8, 9)

for details.

* Initialising the WLAN Adaptor

Press and hold the SETUP button (30 to 35 seconds). After this, press the RESET

button within 5 seconds to initialise.

Parts

Adaptor Unit (1)

(CZ-CAPWFC1)

Screw (2)

M3.8 x 16

Clamper (3) USER’S MANUAL (1)

Dimensions

POWER

LINK

RESET

SETUP

120

(mm)

70 24.8

POWER

LINK

RESET

SETUP

1_WLAN Adaptor_CZ-CAPWFC1_En.indd 7 2018/12/27 18:13:49

WLAN Adaptor Installation

Basic Wiring Diagram

Irrespective of the number of indoor units, the WLAN Adaptor must be used together

with a remote controller.

A remote controller must be connected and it should be set as the “main unit” in the

main-sub remote controller settings.

●Refer to the remote controller installation instructions for details on how to make the

main-sub settings for the remote controller.

● Total length of remote controller wiring: Within 500 m

(Remote controller wiring between indoor units is within 200 m)

●Number of units that can be connected for group control

• Indoor units : Up to 8 units

• WLAN Adaptor : 1 unit

• Wired remote controller : 1 unit

●The system operates irrespective of the indoor unit you choose to connect the

WLAN Adaptor and remote controller to.

When there is 1 indoor unit

T10

1 2

R1 R2

CN03

Indoor unit

Example

WLAN Adaptor

Remote controller wiring

(eld supply)

●No polarity

Terminals for remote

controller wiring

Wired

remote

controller

(main unit)

Communication lines

(1.9 m total length)

T10 connector

1_WLAN Adaptor_CZ-CAPWFC1_En.indd 8 2018/12/27 18:13:49

When there are multiple indoor units

T10R1 R2

CN03

1 2

R1 R2 R1 R2

Indoor unit

Example

WLAN Adaptor

Remote controller

wiring

(eld supply)

●No polarity

Wired

remote

controller

(main unit)

Communication lines

(1.9 m total length)

Indoor unit Indoor unit

Terminals

for remote

controller

wiring

T10 connector

Example of standard installation

1Connect the communication lines to the indoor unit.

Example: With a 4-way cassette indoor unit

Remote controller terminal board

Thread the leads through the

catches in the electrical box.

Fix in place with the included

clampers

T10 connector

●Fix the communication lines in place with the included clampers*.

* Make sure the clampers hold the parts coated in white.

●Lead wires* with crimper terminals should be connected to the remote

controller terminal board. Lead wires* with connectors should be connected to

the T10 connector.

* There may be left over lead wires depending on the type of indoor unit. Tie

back left over lead wires with the included clampers.

* The lead wires with crimper terminals have no polarity.

1_WLAN Adaptor_CZ-CAPWFC1_En.indd 9 2018/12/27 18:13:49

2Remove the top case.

Use a  at head screwdriver or similar

tool to push in the catch on the bottom

case and remove the top case.

Take care not to break the catch when

pushing with the screwdriver.

3When attaching the bottom

case to the wall

Screws (supplied): 2

Attach the WLAN Adaptor to the wall

with the UP mark facing upwards.

Please ensure screws are tightened

 rmly. Do not overtighten screws as

this may damage the casing.

Ensure that the screws do not contact

metallic parts within the wall.

4Attach the top case.

Fit the upper catches before

 tting the lower catch.

Take care not to pinch the

communication lines in the

case.

Top case

Bottom case

Catch

Bottom case

Screw (supplied)

Wall to which the

WLAN Adaptor is  xed

Upper catches (2 places)

Lower catch

When  tting the lower catch, press down on it with a  at head

screwdriver or similar tool and then  t the top case onto it.

* Note that applying too much pressure to the  at head screwdriver

may result in damage to the catch.

Top case

Bottom case

1_WLAN Adaptor_CZ-CAPWFC1_En.indd 10 2018/12/27 18:13:50

Table des matières

Autres manuels Panasonic Récepteur

Panasonic

Panasonic SAXR25 - DIGITAL A/V RECEIVER Manuel utilisateur

Panasonic

Panasonic SA-XR50S Manuel utilisateur

Panasonic

Panasonic SC-HT405D-S Operating Manuel utilisateur

Panasonic

Panasonic SA-XR57E Manuel utilisateur

Panasonic

Panasonic TU-PT600E Manuel utilisateur

Panasonic

Panasonic GAOO CT-32XF56C Manuel utilisateur

Panasonic

Panasonic RF-SW50 Manuel utilisateur

Panasonic

Panasonic Ramsa WX-RP810 Manuel utilisateur

Panasonic

Panasonic WVRC100 - BROADCAST RECEIVER Mode d'emploi

Panasonic

Panasonic SAXR55P - A/V RECEIVER Manuel utilisateur

Panasonic

Panasonic SA-XR700EG Manuel utilisateur

Panasonic

Panasonic SAHE75 - RECEIVER Manuel utilisateur

Panasonic

Panasonic SAXR57 - RECEIVER Manuel utilisateur

Panasonic

Panasonic FZ-AAE184E Manuel utilisateur

Panasonic

Panasonic CQ-VW120W Manuel utilisateur

Panasonic

Panasonic SA-XR58E Manuel utilisateur

Panasonic

Panasonic WX-SE200P Manuel utilisateur

Panasonic

Panasonic CZ-RWRY3 Manuel utilisateur

Panasonic

Panasonic CS-HZ25UKE Manuel utilisateur

Panasonic

Panasonic SAHE7 - RECEIVER Manuel utilisateur

Panasonic

Panasonic CQVA70EU - CAR AUDIO/VIDEO SYS Manuel utilisateur

Panasonic

Panasonic SAHE9 - RECEIVER Manuel utilisateur

Panasonic

Panasonic RAMSA WX-RP700 Manuel utilisateur

Panasonic

Panasonic CQVA70EU - CAR AUDIO/VIDEO SYS Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur