Panasonic PT-MZ670 Manuel utilisateur

Thank you for purchasing this Panasonic product.

■This manual is common to all the models regardless of sufxes of the Model No.

zfor India

D: The standard zoom lens supplied

zfor Asia (except for Taiwan, Korea) / Oceania

A: The standard zoom lens supplied LA: The lens sold separately

zfor Taiwan

A: The standard zoom lens supplied

zfor Korea

Without L: The standard zoom lens supplied

With L: The lens sold separately (PT-MZ670L, PT-MZ570L only)

zfor other countries or regions

Without L: The standard zoom lens supplied With L: The lens sold separately

■Before operating this product, please read the instructions carefully and save this manual

for future use.

■Before using this product, be sure to read “Read this rst!” (x pages 5 to 15).

DPQP1200ZA

LCD Projector Commercial Use

Operating Instructions

Functional Manual

ENGLISH

Model No. PT-MZ670

 PT-MW630

 PT-MZ570

 PT-MW530

2 - ENGLISH

Contents

Read this rst! 5

Chapter 1 Preparation

Precautions for use 19

Lens protection material

Cautions when transporting

Cautions when installing

Security

Notes regarding the wireless LAN

Light ID

DIGITAL LINK

Application software supported by the projector

Disposal

Storing

Cautions on use

Accessories

Optional accessories

About your projector

Remote control

Projector body

Preparing the remote control

Inserting and removing the batteries

When using the multiple projectors

Connecting the remote control to the projector

with a cable

Chapter 2 Getting Started

Setting up 35

Installation mode

Parts for installation (optional)

Projected image and throw distance

Adjusting adjustable feet

Removing/attaching the projection lens

Removing the projection lens

Attaching the projection lens

Attaching the Wireless Module

Connecting

Before connecting

Connecting example: AV equipment

Connecting example: Computers

Connecting example using DIGITAL LINK

Chapter 3 Basic Operations

Switching on/off the projector 57

Connecting the power cord 57

Power indicator 58

Switching on the projector 59

When the initial setting screen is displayed

Making adjustments and selections

Switching off the projector 65

Projecting 66

Selecting the input signal 66

Adjusting the focus, zoom, and lens shift

Moving the lens position to the home position 68

Adjustment range by the lens position shift

(optical shift) 68

Using the USB memory 69

Notes on use 69

USB memory that can be used with the

projector 69

Attaching the USB memory 69

Removing the USB memory 70

Operating with the remote control

Using the shutter function 71

Using the mute function 71

Adjusting the volume 72

Using the freeze function 72

Using the on-screen display function

Using the automatic setup function

Using the screen adjustment function

Using the digital zoom function 74

Switching the image aspect ratio

Using the presentation timer function

Using the function button 75

Displaying internal test pattern 75

Using the status function 76

Using the ECO management function

Setting ID number of the remote control

Chapter 4 Settings

Menu navigation 79

Navigating through the menu 79

Main menu 80

Sub-menu 81

ENGLISH - 3

Contents

[PICTURE] menu

[PICTURE MODE]

[CONTRAST]

[BRIGHTNESS]

[COLOR]

[TINT]

[COLOR TEMPERATURE]

[GAMMA]

[DAYLIGHT VIEW]

[SHARPNESS]

[NOISE REDUCTION]

[DYNAMIC CONTRAST]

[SYSTEM SELECTOR]

[POSITION] menu

[SHIFT]

[ASPECT]

[ZOOM]

[CLOCK PHASE]

[REALTIME KEYSTONE]

[SCREEN ADJUSTMENT]

[ADVANCED MENU] menu

[DIGITAL CINEMA REALITY]

[BLANKING]

[INPUT RESOLUTION]

[CLAMP POSITION]

[RASTER POSITION]

[DISPLAY LANGUAGE] menu

Changing the display language

[DISPLAY OPTION] menu

[COLOR ADJUSTMENT]

[COLOR CORRECTION]

[SCREEN SETTING]

100

[AUTO SIGNAL]

100

[AUTO SETUP]

100

[RGB IN]

101

[HDMI IN]

102

[DIGITAL LINK IN]

103

[ON-SCREEN DISPLAY]

104

[CLOSED CAPTION SETTING] (only when

NTSC signal is input)

107

[SIGNAL SEARCH]

107

[BACK COLOR]

108

[STARTUP LOGO]

108

[SHUTTER SETTING]

108

[P-TIMER]

109

[FREEZE]

110

[DIGITAL ZOOM]

110

[PROJECTOR SETUP] menu 112

[PROJECTOR ID] 112

[PROJECTION METHOD] 112

[ECO MANAGEMENT] 113

[LightID] 115

[INITIAL STARTUP] 116

[STARTUP INPUT SELECT] 116

[DATE AND TIME] 117

[SCHEDULE] 11 8

[RS-232C] 119

[REMOTE1 MODE] 121

[FUNCTION BUTTON] 121

[LENS CALIBRATION] 121

[AUDIO SETTING] 122

[FILTER COUNTER] 124

[DC OUT] 125

[STATUS] 125

[DATA CLONING] 126

[SAVE ALL USER DATA] 129

[LOAD ALL USER DATA] 129

[INITIALIZE] 129

[SERVICE PASSWORD] 130

[TEST PATTERN] menu 131

[TEST PATTERN] 131

[SIGNAL LIST] menu 132

Registering new signals 132

Renaming the registered signal

132

Deleting the registered signal

132

Protecting the registered signal

133

Expanding signal lock-in range

133

Sub memory 134

[SECURITY] menu 135

[SECURITY PASSWORD] 135

[SECURITY PASSWORD CHANGE]

135

[DISPLAY SETTING] 135

[TEXT CHANGE] 136

[MENU LOCK] 136

[MENU LOCK PASSWORD]

136

[CONTROL DEVICE SETUP]

137

[CONTROL DEVICE PASSWORD CHANGE]

138

4 - ENGLISH

Contents

[NETWORK/USB] menu 139

[DIGITAL LINK MODE]

139

[DIGITAL LINK STATUS]

139

[DIGITAL LINK MENU]

140

[WIRED LAN]

140

[WIRELESS LAN]

141

[PROJECTOR NAME]

145

[NETWORK CONTROL]

145

[MEMORY VIEWER]

145

[Panasonic APPLICATION]

147

[MIRRORING]

149

[NETWORK STATUS]

150

Chapter 5 Operations

Network connection 153

Connecting via wired LAN

154

Connecting with the wireless LAN

156

Web control function

158

Computer that can be used for setting

158

Accessing from the web browser

158

Projecting with Panasonic APPLICATION input

178

Application that can be used

178

Connecting the device

178

Ending the connection with the device

178

Description of the standby screen

179

Using the moderator mode in the Panasonic

APPLICATION input

180

Projecting with MIRRORING input

181

Connecting the device

181

Ending the connection with the device

182

Using the moderator mode in the MIRRORING

input

182

Operating with the web browser

183

Description of the [MODERATOR MODE] page

184

Projecting with MEMORY VIEWER input

185

Images that can be played back with the

Memory Viewer function

185

Displaying the Memory Viewer screen

186

Operating the Memory Viewer screen

186

Playing back still images

188

Playing back movies

189

Description of the Memory Viewer screen

191

Playing back using the contents list

192

Using the pairing function

193

Pairing the USB memory

193

Chapter 6 Maintenance

Light source/temperature/lter indicators 196

When an indicator lights up

196

Maintenance/replacement 198

Before performing maintenance/replacement 198

Maintenance 198

Replacing the unit 200

Troubleshooting 202

FAQ 204

Wireless LAN connection 204

Mirroring connection 204

[SELF TEST] display 206

Chapter 7 Appendix

Technical information 209

PJLink protocol 209

Control commands via LAN 210

<SERIAL IN> terminal 213

<REMOTE 1 IN> terminal 216

Operating [MENU LOCK PASSWORD]

216

List of compatible signals 217

Specications 219

Dimensions 224

Precautions for attaching the Ceiling Mount

Bracket 225

Index 226

ENGLISH - 5

Read this rst!

WARNING: THIS APPARATUS MUST BE EARTHED.

WARNING: To prevent damage which may result in re or shock hazard, do not expose this appliance to rain

or moisture.

This device is not intended for use in the direct eld of view at visual display workplaces. To avoid

incommoding reexions at visual display workplaces this device must not be placed in the direct

eld of view.

The equipment is not intended for used at a video workstation in compliance BildscharbV.

The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.

WARNING:

1. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time.

2. To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualied

service personnel.

3. Do not remove the earthing pin on the mains plug. This apparatus is equipped with a three prong earthing-

type mains plug. This plug will only t an earthing-type mains socket. This is a safety feature. If you are

unable to insert the plug into the mains socket, contact an electrician. Do not defeat the purpose of the

earthing plug.

WARNING:

This equipment is compliant with Class A of CISPR32.

In a residential environment this equipment may cause radio interference.

(for Taiwan)

WARNING:

This equipment complies with the Class A standard of CISPR32.

This is Class A information technology equipment that may cause radio frequency interference when used in a

residential environment, in which the user will be required to take certain appropriate countermeasures.

CAUTION: To assure continued compliance, follow the attached installation instructions. This includes using

the provided power cord and shielded interface cables when connecting to computer or peripheral

devices. Also, any unauthorized changes or modications to this equipment could void the user’s

authority to operate this device.

This is a device to project images onto a screen, etc., and is not intended for use as indoor lighting in a

domestic environment.

Directive 2009/125/EC

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT

TO RAIN OR MOISTURE.

WARNING: RISK OF ELECTRIC SHOCK. DON’T OPEN

Indicated on the projector

The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may

be of sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of

important operating and maintenance (servicing) instructions in the literature accompanying the

product.

6 - ENGLISH

Read this rst!

WARNING: Do not look at the light emitted from the lens while the projector is being used.

As with any bright source, do not stare into the direct beam.

Indicated on the projector

RG2 IEC 62471-5:2015

Notice on laser

(for USA and Canada)

This projector is the Class 3R laser product that complies with IEC 60825-1:2007.

(Inside of product)

Indicated on the projector

(for India)

This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.

ENGLISH - 7

Read this rst!

(for other countries or regions)

This projector is the Class 1 laser product that complies with IEC/EN 60825-1:2014.

CAUTION: Use of controls or adjustments or performance of procedures other than those specied herein

may result in hazardous radiation exposure.

CAUTION (North/Middle/South America/Taiwan)

Power Supply: This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only.

CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for

power supplies up to 125 V. If you need to use higher voltages than this, you will need to obtain a

separate 250 V power cord. If you use the accessory cord in such situations, re may result.

CAUTION (North/Middle/South America/Taiwan)

This equipment is equipped with a three-pin grounding-type power plug. Do not

remove the grounding pin on the power plug. This plug will only t a grounding-type

power outlet. This is a safety feature. If you are unable to insert the plug into the

outlet, contact an electrician. Do not defeat the purpose of the grounding plug.

Do not remove

WARNING (USA and Canada)

fNot for use in a computer room as dened in the Standard for the Protection of Electronic Computer/Data

Processing Equipment, ANSI/NFPA 75.

fFor permanently connected equipment, a readily accessible disconnect device shall be incorporated in the

building installation wiring.

fFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily

accessible.

NOTIFICATION (Canada)

This class A digital apparatus complies with Canadian ICES-003.

For USA-California Only

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling

may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

8 - ENGLISH

Read this rst!

FCC NOTICE (USA)

Verication

Model Number: PT-MZ670 / PT-MZ670L / PT-MW630 / PT-MW630L /

PT-MZ570 / PT-MZ570L / PT-MW530 / PT-MW530L

Trade Name: Panasonic

Responsible Party: Panasonic Corporation of North America

Address: Two Riverfront Plaza, Newark, NJ 07102-5490

General Contact: http://www.panasonic.com/support

Projector Contact: https://panasonic.net/cns/projector/

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Caution:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference in which case the user will be required to correct the interference at his own

expense.

FCC Warning:

To assure continued compliance, follow the attached installation instructions. This includes using the provided

power cord and shielded interface cables when connecting to computer or peripheral devices. Also, any

unauthorized changes or modications to this equipment could void the user’s authority to operate this device.

ENGLISH - 9

Read this rst!

IMPORTANT: THE MOLDED PLUG

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.

This appliance is supplied with a molded three pin mains plug for your safety and convenience. A 13 amp fuse

is tted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating

of 13 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is retted when the fuse is replaced. If you

lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover

can be purchased from an Authorized Service Center.

If the tted molded plug is unsuitable for the mains socket in your home, then the fuse should be

removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the

cut off plug is inserted into any 13 amp socket.

If a new plug is to be tted, please observe the wiring code as shown below.

If in any doubt, please consult a qualied electrician.

WARNING: THIS APPLIANCE MUST BE EARTHED.

IMPORTANT: The wires in this mains lead are colored in accordance with the following code:

Green - and - Yellow: Earth

Blue: Neutral

Brown: Live

As the colors of the wire in the mains lead of this appliance may not correspond with the colored markings

identifying the terminals in your plug, proceed as follows.

The wire which is colored GREEN - AND - YELLOW must be connected to the terminal in the plug

which is marked with the letter E or by the Earth symbol or colored GREEN or GREEN - AND -

YELLOW.

The wire which is colored BLUE must be connected to the terminal in the plug which is marked

with the letter N or colored BLACK.

The wire which is colored BROWN must be connected to the terminal in the plug which is marked

with the letter L or colored RED.

How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.

Importer’s name and address within the European Union

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

10 - ENGLISH

Read this rst!

Hazard distance (IEC 62471-5)

The distance at which the level of exposure has dropped to the level of the applicable Exposure Limit Value is

known as the hazard distance or safety distance.

Do not look or stare into the light beam from a distance closer than the hazard distance (RG3 = risk group 3).

Beyond this distance the light beam is considered to be safe. (RG2 = risk group 2)

RG3 level is considered to be a hazard to the eyes from direct radiation.

RG2 level does not pose any optical hazard and can be safely used in all situations.

Hazard Distance Hazard Distance

RG2

RG3

RG2

RG3

(Unit: m)

Lens HD*1 D1*2 max. D2*2 max. D3*2 max. D4*2 max.

ET-ELW21 < 1.0 0.97 0.97 1.13 1.13

ET-ELW22 < 1.0 0.89 0.89 1.03 1.03

ET-ELW20 < 1.0 0.62 0.62 0.72 0.72

Standard Zoom Lens/

ET-ELS20 < 1.0 0.47 0.47 0.55 0.55

ET-ELT20 < 1.0 0.29 0.29 0.34 0.34

ET-ELT21 1.9 0.34 0.34 0.39 0.39

*1 Hazard Distance

*2 D1, D2, D3, and D4 change in accordance with projection lens shift amount. Each number in this table is worst case.

Note

fEach table complies with IEC 60825-1 (2014) and IEC 62471-5 (2015)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Panasonic Projecteur

Panasonic

Panasonic PTLB80NTU - LCD PROJECTOR Manuel utilisateur

Panasonic

Panasonic PT-D3500U Series Manuel utilisateur

Panasonic

Panasonic PTAE500U - LCD PROJECTOR Manuel utilisateur

Panasonic

Panasonic PT-VW330U Instructions d'installation

Panasonic

Panasonic PT-F200 Series Manuel utilisateur

Panasonic

Panasonic PT-LW330 Manuel utilisateur

Panasonic

Panasonic PT-RZ570B Manuel utilisateur

Panasonic

Panasonic PT-LX300E Manuel utilisateur

Panasonic

Panasonic PT-56D30X Manuel utilisateur

Panasonic

Panasonic PT-DW7000E-K Manuel utilisateur

Panasonic

Panasonic PT-TW380 Manuel utilisateur

Panasonic

Panasonic PT-AE2000U Manuel utilisateur

Panasonic

Panasonic PT-RZ475U Manuel utilisateur

Panasonic

Panasonic TX-43GF85 series Manuel utilisateur

Panasonic

Panasonic PTL785U - LCD PROJECTOR UNIT Manuel utilisateur

Panasonic

Panasonic PT-VX615N Manuel utilisateur

Panasonic

Panasonic PT-LB51SU Manuel utilisateur

Panasonic

Panasonic PT-RZ475EA Manuel utilisateur

Panasonic

Panasonic PT-VMZ60 Manuel utilisateur

Panasonic

Panasonic PTDW5000UL - DLP PROJECTOR Manuel utilisateur

Panasonic

Panasonic PT-RZ14K Manuel utilisateur

Panasonic

Panasonic PT-LW25H Mode d’emploi

Panasonic

Panasonic PT-EZ570U Manuel utilisateur

Panasonic

Panasonic PT-DW7000U-K Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur