Panasonic PT-EX12KE Manuel utilisateur

Operating Instructions

Network Operations

LCD Projector Commercial Use

KM4A

 This manual explains the network operation of the projector.

For information other than the network operation, such as the usage, inspection and replacement of parts,

see “Operating Instructions - Projector Operations”.

ENGLISH

Model No. PT-EX12KE

PT-EX12KU

Contents

The illustrations and screenshots in this manual may be different from those on your computer.

Expressions used in this document

Pages to reference within this document are indicated as (See page 00).

Request Regarding Security 3

What you can do 3

Check your computer 4

Necessary environment for computers to be connected                                 4

NETWORK menu 5

Displaying the NETWORK menu  5

Projector name  6

Network setup  7

Network control  8

Network status  9

Network factory default 10

Connecting with Wired LAN 10

Computer operation 10

Using Web Browser 11

Accessing from the Web browser 11

PJLink protocol 23

Control commands  23

PJLink security authorization  23

Control commands via LAN 24

When WEB Control administrator rights password is set (Protect mode)                       24

When WEB Control administrator rights password is not set (Non-protect mode)                    25

Glossary 26

Trademarks 26

Request Regarding Security

When using this product, security breaches of the type described below are conceivable.

• Leakage of your private information via this product

• Illegal operation of this product by a malicious third-party

• Harm to or cessation of operation of this product by a malicious third-party

Be sure to implement sufcient security measures.

• Set passwords, and limit the users that are permitted login access.

• Make sure the password is as hard to guess as possible.

• Change the password periodically.

• Panasonic Corporation and its afliated companies never directly ask customers for their password. Do not give

out your password even if directly asked by a third-party representing themselves as Panasonic Corporation.

• Always use on a network that has safety protection such as a rewall implemented.

<WEB control> (See page 11)

The following operations are possible when using Web browser.

• Setting and adjusting the projector

• Displaying the projector status

• Setting for message transmission

<PJLink> (See page 23)

Compatible with PJLink Class 1. The following operations can be performed from a computer when PJLink protocol

is used.

• Setting the projector

• Querying the projector status

(Refer to “Serial terminal” in “Technical Information” of the Projector Operation manual.)

You can control the projector from a computer, using the control commands of the serial terminals.

What you can do

Check your computer

Necessary environment for computers to be connected

• First, check your computer to see whether or not it has a wired LAN  function.

“Glossary” (See page 26)

• Before connecting the projector to the computer, be sure to check the following settings.



Wired LAN

Check 1 For LAN cable

• Is the cable properly connected?

• Use LAN cable that is compatible with category 5 or above.

Check 2 Wired LAN settings

• Is your wired LAN switched on?

• Is your wired LAN adapter properly recognized?

• Is your wired LAN adapter switched on?

• Install the wired LAN adapter driver beforehand.

For details on how to install the driver, refer to the instructions accompanying the wired LAN adapter.

Check 3 For Web browser

• Web browser is necessary to use WEB control.

• Compatible OS : Windows XP/Windows Vista/Windows 7, Mac OS X v10.4/v10.5/v10.6

• Compatible Web browser : Internet Explorer 7.0/8.0/9.0, Safari 4.0/5.0 (Mac OS)

Do not touch the LAN terminal or the metal part of the LAN cable, the static electricity may discharge from our

hand (body) causing a malfunction.

NETWORK menu

To connect the projector and the computer by changing the setting at the time of purchase, change the setting by

displaying the menu with the following procedure.

Displaying the NETWORK menu

1 Press the <MENU> button on remote control.

The main menu appears.

Input 1 RGB(PC analog)

Video

XGA1

Input 2

System

Input 3

Input 4

Exit Next NextMove

PC adjust

Image select

Input

Image adjust

Screen

Setting

Information

Network

2 Select [Network] with the ▲▼ buttons.

The network menu appears.

Projector name

Network setup

Network control

Network status

Network factory default

Exit Next NextMove

PC adjust

Image select

Input

Image adjust

Screen

Setting

Information

Network

3 Press the <ENTER> button.

You can select the sub-menu item.

Unavailable items on the menu screen are grayed out and cannot be selected.

NETWORK menu (continued)

Projector name

You can change the projector name to be displayed on the network.

1 Press ▲▼ to select [Projector name], and press <ENTER> button.

Projector name

Network setup

Network control

Network status

Network factory default

Exit NextMove

PC adjust

Image select

Input

Image adjust

Screen

Setting

Information

Network

Back

2 Select characters with the ▲▼◄► buttons and

press the <ENTER> button to enter the projector

name.

3 Select [Set] with the ▲▼◄► buttons and press

the <ENTER> button.

Select [Cancel] to undo the changes and then press the

<ENTER> button.

4 Select [Yes] or [No] with the ▲▼◄► buttons and

press the <ENTER> button.

Projector name

Set

Cancel

Exit EnterMove MoveMove

PT-EX12K

NETWORK menu (continued)

Network setup

You can make detailed wired LAN settings.

1 Press ▲▼ to select [Network setup], and press <ENTER> button.

The detailed [Network setup] screen will be displayed.

Projector name

Network setup

Network control

Network status

Network factory default

Exit NextMoveBack

PC adjust

Image select

Input

Image adjust

Screen

Setting

Information

Network

DHCP Off

Set Cancel

Default gateway

Subnet mask

IP address

DNS1

DNS2

Exit SetAdjust

2 Press ▲▼ to select an item, and change the setting according to the instructions.

DHCP 

(DHCP client function)

On: If a DHCP server exists in the network to which the

projector is connected, the IP address will automatically be

acquired.

Off: If a DHCP server does not exist in the network to which

the projector is connected, additionally set [IP address],

[Subnet mask ] and [Default gateway ].

IP address 

(Display of IP address and setting) Enter the IP address if DHCP server is not used.

Subnet mask

(Displaying and setting the subnet mask) If not using a DHCP server, enter the subnet mask.

Default gateway 

(Display of gateway address and setting) Enter the gateway address if DHCP server is not used.

DNS Sets IP address of the DNS server.

 “Glossary” (See page 26)

3 Press ▲▼◄► to select [Set], and press <ENTER> button.

Save the current network settings.

Before using the DHCP server, make sure the DHCP server is already functioning.

For details of IP address, subnet mask, gateway and DNS, ask the network administrator.

 Default wired LAN settings

The following settings are set before the projector leaves the factory.

DHCP Off

IP address 192.168.10.100

Subnet mask 255.255.255.0

Default gateway 192.168.10.1

DNS 1

DNS 2

NETWORK menu (continued)

Network control

Set when you want to control the projector from a computer connected to the network.

1 Press ▲▼ to select [Network control].

Projector name

Network setup

Network control

Network status

Network factory default

Exit Next NextMoveBack

PC adjust

Image select

Input

Image adjust

Screen

Setting

Information

Network

2 Press <ENTER> button or the ► button to access the submenu.

Select [WEB control], [PJLink control], [Command control], [AMX D.D.] items with

the ▲▼ buttons.

Network control

WEB control On

Off

PJLink control

Command control

AMX D. D.

Exit NextMoveBack

PC adjust

Image select

Input

Image adjust

Screen

Setting

Information

Network

3 Press the <ENTER> button.

4 Press ▲▼ to select an item and press the <ENTER> button.

[AMX D. D.] function allows the projector to be detected by AMX Device Discovery.

For more details about AMX D.D., visit http://www.amx.com/.

NETWORK menu (continued)

Network status

This function shows the LAN setting environment of the currently selected projector.

1 Press ▲▼ to select [Network status].

Projector name

Network setup

Network control

Network status

Network factory default

Exit Next NextMoveBack

PC adjust

Image select

Input

Image adjust

Screen

Setting

Information

Network

2 Press <ENTER> button or the ► button to show the information of the current

projector status.

Network status

Projector name

IP address

MAC address

Network version

Exit Back

PC adjust

Image select

Input

Image adjust

Screen

Setting

Information

Network

NETWORK menu (continued)

Connecting with Wired LAN

Computer operation

Connection can be made with wired LAN. However, conrm to your system administrator on network settings

before changing any settings.

1 Turn on the computer.

2 Make the network setting according to your system administrator.

If the projector settings are the default settings, the computer can be used with the following network

settings.

DHCP Off

IP address 192.168.10.101

Subnet mask 255.255.255.0

Default gateway 192.168.10.1

DNS 1

DNS 2

Network factory default

You can reset the network setting to the factory default of the projector.

1 Press ▲▼ to select [Network factory default], and press <ENTER> button.

2 A conrmation box appears and select [Yes] and then press <ENTER> button. Another

conrmation box appears and select [Yes] and then press <ENTER> button.

Exit Move Enter

Yes

Return to Network factory default ?

Exit Move Enter

Yes

OK ?

Yes

Return to Network factory default ?

Projector name

Network setup

Network control

Network status

Network factory default

Exit NextMoveBack

PC adjust

Image select

Input

Image adjust

Screen

Setting

Information

Network

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Panasonic Projecteur

Panasonic

Panasonic PTL557U - LCD PROJECTOR Manuel utilisateur

Panasonic

Panasonic PTLB51NTU - LCD PROJECTOR - MULTI LANGUAGE Manuel utilisateur

Panasonic

Panasonic PTLB10SU - LCD PROJECTOR Manuel utilisateur

Panasonic

Panasonic PT-LX26HE Manuel utilisateur

Panasonic

Panasonic PT-VW431DE Manuel utilisateur

Panasonic

Panasonic PT-47WX49 Manuel utilisateur

Panasonic

Panasonic PT-AE2000E Manuel du système

Panasonic

Panasonic PTD5500U - DLP PROJECTOR Manuel utilisateur

Panasonic

Panasonic PT-VW330U Manuel utilisateur

Panasonic

Panasonic PTL759VU - LCD PROJECTOR Manuel utilisateur

Panasonic

Panasonic PT-AR100EA Manuel utilisateur

Panasonic

Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform... Manuel utilisateur

Panasonic

Panasonic PT-CW240 Manuel utilisateur

Panasonic

Panasonic PTST10EA - LCD PORJECTOR Manuel utilisateur

Panasonic

Panasonic PT-LB10NTU - Mobile Proj XGA 2000 Lumens 4.9LBS Cross Platform... Manuel utilisateur

Panasonic

Panasonic PT-VMZ50 Manuel utilisateur

Panasonic

Panasonic PT-FW100 Manuel utilisateur

Panasonic

Panasonic PTL300U - LCD PROJECTOR Manuel utilisateur

Panasonic

Panasonic PT-FX400 Manuel utilisateur

Panasonic

Panasonic PT-RQ35K Manuel utilisateur

Panasonic

Panasonic PT-LB20EA Manuel utilisateur

Panasonic

Panasonic PTL292U - LCD PROJECTOR Manuel utilisateur

Panasonic

Panasonic PT-VX42Z Manuel utilisateur

Panasonic

Panasonic PT-VW345NZ Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur