Panasonic JT-H200PR Series Manuel utilisateur

PRINTER

OPERATING INSTRUCTIONS

Model No.

JT-H200PR

Series

Contents

English

Read Me First ......................2

1. Getting Started .................3

2. Operation..........................7

3. Appendix ..........................9

Deutsch

Einführung............................13

1. Vorbereitung.....................14

2. Betrieb..............................18

3. Anhang ............................ 20

Français

À lire en premier ..................24

1. Commençons...................25

2. Utilisation..........................29

3. Annexe .............................31

For USA ...............................35

For CANADA .......................36

２

Read Me First

Introduction

Thank you for purchasing the JT-H200PR series Panasonic Printer.

This manual describes the instructions for the printer.

Please read this manual carefully before using this product.

What’s in the Box?

1. Printer (Battery is not included.)

2. Operation Instructions manual (this book)

Options

1. Battery Pack : JT-H100DP-50

2. Battery Charger : JT-H100CG-55

3. Wearable Case : JT-H200PR-C0

Other Equipment

1. Thermal Paper (Please ask our sales rep about the recommended Paper.)

This Printer is equipped with “Bluetooth” wireless communication.

[Class1 Device]

0560

３

1. Getting Started

■

■■

■Precautions

[ Printer:JT-H200PR-∗∗ ]

1. Avoid Radio Frequency Interference

Do not place the printer near a television or radio receiver.

2. Avoid Stacking

Do not place heavy objects on the printer.

3. Keep Small Objects Away

Do not insert paper clips or other small objects into printer.

There is the risk of heat, fire or explosion.

4. Keep Dry

There is the risk of heat, fire or explosion.

5. Do Not Disassemble the Printer

Do not attempt to disassemble the printer. There is the risk of heat, fire or explosion.

6. Do Not Touch

Keep your hands away from the paper cutter and the thermal head.

There is the danger of injury.

7. Do Not Use With Any Other Battery

The printer is designed for the specified JT-H100DP-50 battery.

Do not use the printer with any other battery.

8. Do Not Use In Aircrafts or Hospitals

This printer includes “Bluetooth” wireless communication.

Turn off the power switch in aircrafts or hospitals.Abnormal use may occur if used in close

proximity to electric instruments or electro-medical apparatus.

<NOTE>

Do not open the cover while the printer is operating.

Keep the thermal paper away from the direct exposure to light, high temperature, dust and

humidity.

CAUTION

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions and local requirements.

４

■

■■

■Precautions

[ Battery Pack:JT-H100DP-50 ]

1. Avoid Heat

Do not throw the battery pack into a fire or expose it to excessive heat. There is the risk of

explosion.

2. Keep Articles Away

Do not place the battery pack together with articles such as necklaces or hairpins when

carrying or storing. There is the risk of heat, fire or explosion.

3. Keep Dry

There is the risk of heat, fire or explosion.

4. Do Not Disassemble

Do not insert sharp objects into the battery pack. Do not deform, disassemble, or modify

the printer. There is the risk of heat, fire or explosion.

5. Do Not Short

Do not short the positive (+) and negative(-) contact.

There is the risk of heat, fire or explosion.

6. Avoid Extreme Heat, Cold, and Direct Sunlight

Do not charge, use or leave the battery pack for extended periods where it will be exposed

to direct sunlight or in a hot, or cold environment.

7. Do Not Put Into a Microwave Oven

Do not put the battery pack into a microwave oven or a pressurized chamber.

There is the risk of explosion.

8. Do Not Use With Any Other Device

The battery pack is designed for the specified JT-H200PR-∗∗ printer and JT-H100CG-55

charger. Do not use the battery with any other device.

9. Stop Using

Should the battery emit an abnormal odor, become hot to the touch, become discolored,

change shape, or become in any way different, remove it from the printer and stop using it.

<NOTE>

Please charge the battery pack for at least 100minutes before first use.

Please ask our sales rep about the dispose method of the battery.

If the battery pack is not going to be used for a long period, please charge or discharge it until

the remaining battery capacity becomes 30% to 40% and store it in a cool, dry place.

CAUTION

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions and local requirements.

５

■

■■

■Precautions

[ Battery Charger:JT-H100CG-55 ]

1. Keep Small Objects Away

Do not insert paper clips or other small objects into charger.

There is the risk of heat or fire.

2. Do Not Disassemble the Charger

Do not attempt to disassemble the charger. There is the risk of heat or fire.

3. Keep Dry

There is the risk of heat or fire.

4. Do Not Short

Do not short the positive(+) and negative(-) contact. There is the risk of heat or fire.

5. Do Not Use With Any Other Battery

The charger is designed for the specified JT-H100DP-50 battery. Do not use the charger

with any other battery.

6. Do Not Touch the Plug with Wet Hands.

There is the risk of electric shock.

7. Do Not Touch the Charger During a Lightning.

There is the risk of electric shock.

8. Be Certain to Plug Fully Into the Outlet.

There is the risk of electric shock or fire.

9. When Unplugging, Make Sure to Hold the Body of the Plug .

If the power strip is damaged, there is a risk of electric shock, short circuit or fire.

10. Do Not Use a Damaged Power-code or Plug.

There is the risk of electric shock or fire.

11. Clean the Dust off the Plug, Periodically.

There is the risk of heat or fire.

<NOTE>

To prolong the life of the battery, please remove it from the charger within 24 hours when

charging is complete.

Please charge the battery at temperature between 5 to 40 degrees centigrade.

CAUTION

Risk of explosion if battery is replaced by an incorrect type.

Dispose of used batteries according to the instructions and local requirements.

６

■

■■

■Name of each part & function

LED Indicate Status

Off Normal

Green Light 1. Power-on (lights up for 5 seconds),

2. Power-off (lights up for 0.5 seconds)

Orange Light Detect battery voltage low; still printable.

Red Light Detect battery voltage low; unprintable.

Status

LED

Red Blink 1. The Paper Cover is open.

2. Paper is not in the printer.

3. Other errors, the printer is out of order.

Receiving

LED Green Blink During communication

Battery Cover Lever

Paper Cover

Receiving LED

Status LED

Feed

(Press button to feed paper)

Feed

Status

Receiving

Paper

Cover

Lever

IrDA I/F

Power

Switch

Paper Out

７

2. Operation

■

■■

■Battery Installation

1) Close the Battery Cover

2) Push down the Battery Cover

3) Slide the Battery Cover Lever

<NOTE>

If the Battery Cover comes off, fit it as indicated.

* Slide the Battery Cover hinge into the metal

bar and hook to it.

1) Slide the Battery Cover Lever

2) Pull the Battery Cover up

3) Open the Battery Cover

4) Slide and insert the Battery completely to the printer

８

■

■■

■Paper Installation

■

■■

■Charging Battery

1) Slide the Paper Cover Lever

2) Open the Paper Cover

Paper

3) Install Paper (Paper must be tightly rolled and be confirmed that dust/sand is not on.)

4) Close the Paper Cover (Make sure that the Cover is closed completely)

Power LED :Red

Charger LED (

Slot

)

:Green

Charger LED (

Slot

)

:Green

1) Put the Battery on the Charger slot and slide to direction.

2) When charging, Charger LED blinks green. When charging is completed

, Charger LED

constantly lights green. Charging function is limited to one Battery at any moment even if

two Batteries are set to the Charger.

When charging is completed in one slot, the charging of another slot starts automatically.

* Charging Time: approx. 2H per Battery

3) Remove the Battery from the Charger after Charging.

９

3. Appendix

■

■■

■Troubleshooting

Symptom Possible Cause Action

No Power in Printer

1.Has the battery fully inserted?

2.Is the Power Switch on? 1.Charge the battery pack.

2.Move the Power Switch on.

Nothing is printed

1.Is the power turned on?

2.Is the paper set correctly?

3.Are the LED signals lighting red?

4.Is the LED blinking red?

5. Are you using Bluetooth?

6.Are you using IrDA?

1.Turn on power.

2.Check the print paper setting.

3.Charge the battery.

4.Make sure that the paper is

setting properly, or close the

paper cover completely.

5.Reduce the distance of the

device and the printer.

6. Adjust the angle of IrDA,

or clean up the window,

or avoid direct sunlight.

The print is faint 1.Isn’t the thermal head dirty?

2.Are you using the recommended

paper?

1.Clean it up.

2.Check the paper.

The orange or red

LED is lighting

even after

charging battery.

The life cycle of the battery pack

may have expired. Replace the battery pack with a

new one.

■

■■

■How to care

How to clean up the thermal head and the rubber roller.

1) Push the paper cover lever to open the paper cover.

2) Wipe off any dust/dirt using the cotton swab with a small amount of alcohol (ethanol).

(Do not use thinner, benzene series or kerosene series.)

3) Close the cover after alcohol volatilizes.

Rubber roller

Thermal head

１０

■

■■

■Specifications

[ Printer:JT-H200PR-∗∗ ]

Items Description Specifications

Printing Line ThermalMechanical Printing Speed Max. 80 mm/Sec

(Panasonic Test Standard)

Printing Width 48 mm (384 dots/ line)Head Character font 12 x 24 dots (standard)

Printing Function

Font Type Alpha-numeric, Barcode, 2D code

Equal or more than 1 X 10

８

pulse

Life Time Head Equal or more than 25 Km

(Recommended paper）

Paper width 58 mm

+0 – 1 mm

Paper Roll direction Outside (outside surface; thermal)

Type1 Bluetooth V2.0+EDR (Class 2) 2.4 GHzCommunication Type2 IrDA V1.2 (Proprietary)

Power supply Battery Pack:JT-H100DP-50

Size Approx.W88 mm x L102 mm x D43 mmSize & Mass Mass Approx. 280 g(without paper)

Environment Operation temperature

0 to 40 degree centigrade (without paper)

[ Battery Pack:JT-H100DP-50*

]

Items Description Specifications

Type Lithium ion Battery 7.2 VBattery Cell Rated capacity 1,150 mAh (standard discharging)

Life time 300 times discharge/charge or 1year *

Size Approx. W70 mm x L38 mm x D20 mmSize & Mass Mass Approx. 90 g

Environment Operation temperature

0 to 40 degree centigrade

*1: The battery is a consumable item therefore consumption and life time is just an indication

and may vary depending on usage and environment conditions.

*2: JT-H100DP-50; Europe version. Please contact Panasonic sales office for the North

America version battery.

Autres manuels pour JT-H200PR Series

Table des matières

Langues :

Autres manuels Panasonic Imprimante

Panasonic

Panasonic KX P2023 - KX-P 2023 B/W Dot-matrix Printer Manuel utilisateur

Panasonic

Panasonic WORKIO DP-CL21 Manuel utilisateur

Panasonic

Panasonic KX-P1124 Manuel utilisateur

Panasonic

Panasonic KX-P1131E Manuel utilisateur

Panasonic

Panasonic KX-P1124 Manuel utilisateur

Panasonic

Panasonic KX P2023 - KX-P 2023 B/W Dot-matrix Printer Manuel utilisateur

Panasonic

Panasonic KX-P3123 - KX-P 3123 B/W Dot-matrix Printer Manuel utilisateur

Panasonic

Panasonic KX-P3696 Manuel utilisateur

Panasonic

Panasonic KX-P3626 Manuel utilisateur

Panasonic

Panasonic KX-P4410 Manuel utilisateur

Panasonic

Panasonic DP-MC210 Manuel utilisateur

Panasonic

Panasonic WORKIO CL500 Comment utiliser

Panasonic

Panasonic FP-D250 Manuel utilisateur

Panasonic

Panasonic KXF-193C Manuel utilisateur

Panasonic

Panasonic SV-AP10 Operating Manuel utilisateur

Panasonic

Panasonic KX-CL400 Manuel utilisateur

Panasonic

Panasonic SV-AP10E Manuel utilisateur

Panasonic

Panasonic KX-P7500 Manuel utilisateur

Panasonic

Panasonic Panafax UF-8100 Manuel utilisateur

Panasonic

Panasonic KX-MB262CX Manuel utilisateur

Panasonic

Panasonic Jetwriter KX-P4440 Manuel utilisateur

Panasonic

Panasonic PV-PD2000 Manuel utilisateur

Panasonic

Panasonic KX-MB2061CXB Manuel utilisateur

Panasonic

Panasonic KX-P7100 Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur