Panasonic EY7546 Manuel utilisateur

© Panasonic Electric Works Co., Ltd. 2011.

All rights reserved. Unauthorized copying and distri-

bution is a violation of law.

Order Number PTD1103X37CE

Cordless Impact Driver / Cordless Impact Wrench

Model No. EY7546

EY7550

(Cordless Impact

Driver)

Model No. EY7547

EY7551

(Cordless Impact

Wrench)

Europe and Oceania

TABLE OF CONTENTS PAGE PAGE

1 Warning-------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 7

5 Wiring Connection Diagram ---------------------------------13

6 Schematic Diagram---------------------------------------------13

7 Exploded View and Replacement Parts List -----------14

2

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

2.1. MAIN UNIT

2.2. MAXIMUM RECOMMENDED CAPACITIES

3

3 Troubleshooting Guide

3.1. Troubleshooting Guide(Refer to Wiring Connection Diagram)

4

5

6

3.2. Trial Operation (after checking Troubleshooting Guide.)

3.2.1. ASSEMBLY

1. Confirm if there is NO gap between Housing A and B by pinching the lead wires.

2. Confirm all screws are tightened firmly.

3. There should be no metallic sound and abnormal sound.

4. There is no dust or deformation on battery terminals.

5. Confirm if there is no dirt when repairing.

3.2.2. OPERATION

1. Confirm the forward and reverse side of rotation.

2. Confirm if LED rights ON. Once battery pack is removed and attached, press the switch handle, otherwise LED does not right

ON.

3. Confirm the rotation of speed if it changes in proportion to the amount of pushing level on switch handle.

4. Confirm if the rotation stops when releasing the switch handle.

5. Confirm the smooth movement of the bit holder.

6. Confirm the impact operation.

7

4 Disassembly and Assembly Instructions

Ref. No. 1A Procedure 1A Removal of Housing.

1. Loosen a screw.

2. Take out the plate hook.

3. Remove nine housing screws.

8

Ref. No. 1B Procedure 1A →1B Removal of Motor assembly and Driving shaftassembly..

1. Take out the motor assembly with the driving shaft assembly from

the housing.

2. Separate the motor assembly from the driving shaft assembly with

holding the motor mounting plate.

3. Pull off the fixation cover assembly.

9

Ref. No. 1C Procedure 1A →1B→1C Removal of Battery terminal base assembly.

1. Hold the switch and the battery terminal base assembly.

2. Pull out the quick-connect terminal by something like the stop ring

removal pliers.

NOTE:

Make sure to pull out straight away.

Ref. No. 1D Procedure 1A →1B →1C →1D Removal or attachment of FPC.

(Removal)

1. Slightly pull up the connector.

NOTE:

Connector is not able to remove from the control PCB.

2. Pull out FPC.

NOTE:

Make sure to handle FPC gently in order to avoid the breakage.

(Attachment)

1. Apply the grease on the places where insert into the connectors.

10

Ref. No. 1E Procedure 1A →1B →1C→1D →1E Removal or assembly of module assembly.

(Removal)

1. Pull out the connector from the module assembly.

NOTE:

Make sure hold the connector at the bottom area.

(Attachment)

1. Apply the permalub grease around the tact switch and connectors.

NOTE:

Make sure to apply the grease to keep IP56.

2. Insert the connector firmly.

Ce manuel convient aux modèles suivants

3

Table des matières

Autres manuels Panasonic Moteur à percussion

Panasonic

Panasonic EYFLA7A Manuel utilisateur

Panasonic

Panasonic EYFLA4A Manuel utilisateur

Panasonic

Panasonic EY75A7 Manuel utilisateur

Panasonic

Panasonic EY6588 Manuel utilisateur

Panasonic

Panasonic EY75A7 Manuel utilisateur

Panasonic

Panasonic EY75A1 Manuel utilisateur

Panasonic

Panasonic EY76A1 Manuel utilisateur

Panasonic

Panasonic EY7546LR2S Manuel utilisateur

Panasonic

Panasonic EY7540LN2L Manuel utilisateur

Panasonic

Panasonic EY7201 - 12V IMPACT Manuel utilisateur

Panasonic

Panasonic EY75A7 Manuel utilisateur

Panasonic

Panasonic EY7530 Manuel utilisateur

Panasonic

Panasonic EY75A1 Manuel utilisateur

Panasonic

Panasonic EY7202 - 12V IMPACT DRIVER Manuel utilisateur

Panasonic

Panasonic EY7201-U1 Manuel utilisateur

Panasonic

Panasonic EY7206 - 12V IMPACT DRIVER Manuel utilisateur

Panasonic

Panasonic EY75A7 Manuel utilisateur

Panasonic

Panasonic EY-6506 Manuel utilisateur

Panasonic

Panasonic EYF581-U1 Manuel utilisateur

Panasonic

Panasonic EY75A1 Manuel utilisateur

Panasonic

Panasonic EY7206 - 12V IMPACT DRIVER Manuel utilisateur

Panasonic

Panasonic EY75A7 Manuel utilisateur

Panasonic

Panasonic EY75A1 Manuel utilisateur

Panasonic

Panasonic EY7542 - CORDLESS IMPACT WRENCH Manuel utilisateur

Manuels Moteur à percussion populaires d'autres marques

stayer

stayer IW500D Manuel utilisateur

Makita

Makita DTD152 Manuel utilisateur

Milwaukee

Milwaukee M12 FID Manuel utilisateur

Grizzly

Grizzly H6140 Manuel utilisateur

Makita

Makita BTW450 Manuel utilisateur

Ozito

Ozito LID-3000 Manuel utilisateur

Astro Pneumatic Tool

Astro Pneumatic Tool 1812 Manuel utilisateur

Greenlee

Greenlee HW3 Manuel utilisateur

Sthor

Sthor 57091 Manuel utilisateur

Makita

Makita DTD145 Manuel utilisateur

Hilti

Hilti SIW 2-A12 Manuel utilisateur

Ryobi

Ryobi R18IW3 Manuel utilisateur

Parkside

Parkside PDSSA 20-Li A1 Manuel utilisateur

Flex

Flex FX1471 Manuel utilisateur

SATA

SATA 51075C Manuel technique

Cembre

Cembre NR-11P Manuel utilisateur

Makita

Makita BTP131RFE Manuel utilisateur

DeWalt

DeWalt XR Li-ion DCF902 Manuel utilisateur