Panasonic EY7411 - CORDLESS DRILL & DRIVER Manuel utilisateur

© 2007 Matsushita Electric Works, Ltd.

All rights reserved. Unauthorized copying and distri-

bution is a violation of law.

Order Number PTD0703U32CE

F16

Cordless Drill & Driver

Model No. EY7411

North America

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 6

5 Wiring Connection Diagram ---------------------------------- 9

6 Schematic Diagram ---------------------------------------------- 9

7 Exploded View and Replacement Parts List -----------10

2

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3

3 Troubleshooting Guide

4

5

6

4 Disassembly and Assembly Instructions

4.1. Disassembly Instructions

Ref. No. 1A Procedure 1A Removal of the grip.

1. Remove both sides of the grip fastening clip by sliding it outward.

2. Remove one grip fastening screw.

3. To separate the grip housing, insert the battery pack into the grip

about one third. Slightly shake the battery until the end of grip will be

opened.

4. Separate the grip A and B with holding the control panel by some-

thing like a fine stick.

Ref. No. 1B Procedure 1A →1B Removal of the housing.

1. Remove 4 screws from the housing.

2. Separate the housing A and B.

3. Remove the clutch handle, adjusting screw, clutch spring and

clutch plate.

7

Ref. No. 1C Procedure 1A →1B →1C Removal of the motor.

1. Remove the motor and the switch block together with the torque

detection PCB from the driving block.

2. Remove the switch from the motor.

Ref. No. 1D Procedure 1A →1B→1C →1D Removal of the driving block.

1. Remove High/Low handle by spreading the spring.

2. The internal parts of driving block can be disassembled.

8

4.2. Assembly Instructions

NOTE: When reassembling, apply grease around the ring and planet gears.

4.3. After Reassembling

Confirm the following pints before retuning the unit to a customer.

9

5 Wiring Connection Diagram

6 Schematic Diagram

10

7 Exploded View and Replacement Parts List

7.1. Exploded View

Autres manuels pour EY7411 - CORDLESS DRILL & DRIVER

1

Table des matières

Autres manuels Panasonic Percer

Panasonic

Panasonic EY6930 - HAMMER DRILL Manuel utilisateur

Panasonic

Panasonic EY74A1 Manuel utilisateur

Panasonic

Panasonic EY74A2 Manuel utilisateur

Panasonic

Panasonic 7430LA Manuel utilisateur

Panasonic

Panasonic EY6903 Manuel utilisateur

Panasonic

Panasonic EY7442 Manuel utilisateur

Panasonic

Panasonic EY6230 - CORDLES DRILL&DRIVER Manuel utilisateur

Panasonic

Panasonic EY6780 Manuel utilisateur

Panasonic

Panasonic EY6950-U1 Manuel utilisateur

Panasonic

Panasonic EY7460 - DRILL DRIVER 21.6V Manuel utilisateur

Panasonic

Panasonic 7460OLOA Manuel utilisateur

Panasonic

Panasonic EY6535 - CORDLESS Manuel utilisateur

Panasonic

Panasonic EY7441 Manuel utilisateur

Panasonic

Panasonic cs-903ke Manuel utilisateur

Panasonic

Panasonic EY6450-U1 Manuel utilisateur

Panasonic

Panasonic EY 503 Manuel utilisateur

Panasonic

Panasonic EY6950 - 18V HAM. DRILL&DRIVE Manuel utilisateur

Panasonic

Panasonic EY7411LA1S Manuel utilisateur

Panasonic

Panasonic EY6931NQKW Manuel utilisateur

Panasonic

Panasonic EY6405-X8 Manuel utilisateur

Panasonic

Panasonic EY78A1 Manuel utilisateur

Panasonic

Panasonic EY6405 - CORDLES DRILL&DRIVER Manuel utilisateur

Panasonic

Panasonic EY6803 - HAMMER DRILL DRIVER 12V Manuel utilisateur

Panasonic

Panasonic EY 6220 Manuel utilisateur

Manuels Percer populaires d'autres marques

Makita

Makita BDF456 Manuel utilisateur

Black & Decker

Black & Decker LDX220 Manuel utilisateur

Hitachi

Hitachi DH 40MA Manuel utilisateur

Challenge

Challenge JO Manuel de référence technique

Makita

Makita LXFD01 Manuel utilisateur

Festool

Festool T18+3 Manuel utilisateur

Milwaukee

Milwaukee M12 FPDX-202X Manuel utilisateur

EINHELL

EINHELL TE-RH 32 E Manuel utilisateur

Makita

Makita DHP484 Manuel utilisateur

Makita

Makita FD05 Manuel utilisateur

Bosch

Bosch PSB 530 RA Manuel utilisateur

Maximum

Maximum 054-1359-4 Manuel utilisateur

Makita

Makita HP332D Manuel utilisateur

Raider

Raider RDP-HD31H Manuel utilisateur

Bort

Bort BPM-1400x2 Manuel utilisateur

Black & Decker

Black & Decker 7266 Manuel utilisateur

KENT USA

KENT USA TRD1230 Manuel utilisateur

Bosch

Bosch GSB 19-2 RE Manuel utilisateur