Panasonic AK-HC910L Manuel utilisateur

1080I Multi-purpose

Digital Camera

AK-HC910L

Before attempting to connect, operate or adjust this product,

please read these instructions completely.

Printed in Japan

F0905Y1105 VQTB0099

- 2 -

1indicates safety information.

$DO NOT REMOVE PANEL COVERS BY UNSCREWING.

To reduce the risk of electric shock, do not remove the covers. No user

serviceable parts inside.

Refer servicing to qualified service personnel.

WARNING:

• TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE

THIS EQUIPMENT TO RAIN OR MOISTURE.

• TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, KEEP THIS

EQUIPMENT AWAY FROM ALL LIQUIDS. USE AND STORE ONLY IN

LOCATIONS WHICH ARE NOT EXPOSED TO THE RISK OF DRIPPING OR

SPLASHING LIQUIDS, AND DO NOT PLACE ANY LIQUID CONTAINERS ON

TOP OF THE EQUIPMENT.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING

INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

For Your Safety

- 3 -

Information on Disposal for Users of Waste Electrical & Electronic Equipment

(private households)

This symbol on the products and/or accompanying documents means that used

electrical and electronic products should not be mixed with general household

waste.

For proper treatment, recovery and recycling, please take these products to

designated collection points, where they will be accepted on a free of charge

basis. Alternatively, in some countries you may be able to return your products to

your local retailer upon the purchase of an equivalent new product.

Disposing of this product correctly will help to save valuable resources and prevent any potential

negative effects on human health and the environment which could otherwise arise from

inappropriate waste handling.

Please contact your local authority for further details of your nearest designated collection point.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national

legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier

for further information.

Information on Disposal in other Countries outside the European Union

This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or dealer and ask for the

correct method of disposal.

For Your Safety

- 4 -

For Your Safety...............................2, 3

Preface ...............................................5

Features..............................................5

Precautions.........................................6

Major Operating Controls and

Their Functions.............................7, 8

_Front Panel ...................................7

_Top and Bottom Panels ............7, 8

_Side Panel ....................................8

How to Install ......................................9

_How to set the lens .......................9

_How to install on the camera

housing, pan/tilt head,

tripod, etc. .....................................9

How to Set Up the System

(Connection) ...................................10

Multi-purpose Digital Camera

Control System Configuration ..........11

Multi-purpose Digital Camera

Pan/Tilt Head Compatible

System Configuration.......................12

Operation Procedure ........................13

How to Adjust...........................14 to 16

_Flange back adjustment

(for zoom lens)............................14

_Lens iris gain volume

adjustment ..................................14

_White balance adjustment ..........15

_Colour temperature and

white balance adjustment

(reference) ..................................15

_Black balance adjustment...........16

_Gen lock adjustment ...................16

Setting of Menu Items..............17 to 29

_Configuration of menu display

screen .........................................17

_USER menu (Initial screen) ........18

!Maintenance menu ............19 to 25

1Black shading correction

menu.......................................19

2Pedestal, gamma, flare

adjustment menu ....................20

3Knee&white clip

adjustment menu ....................21

4Gain adjustment menu............22

5Detail adjustment menu....22, 23

6Master gain, auto iris setting

menu.......................................23

7Super gain, Detail, Pedestal-

offset level setting menu .........24

8Matrix menu ............................25

9Colour correction 1 menu .......25

qZ Colour correction 2 menu .......25

@Setting menu.........................26, 27

1Camera mode setting

menu.................................26, 27

2Electronic shutter setting

menu.......................................27

3Horizontal phase adjustment

menu for external reference

signal ......................................27

#Camera ID setting menu.............28

$File managing and renewing

menu.....................................28, 29

-File operation menu..........28, 29

Outside Dimension Diagram.............30

Specifications & Accessories............31

Contents

- 5 -

Preface

Thank you very much for purchasing the multi-purpose digital

camera.

New 2/3q2.2 million-pixel CCD is

employed.

[1920(H) k1080(V)]

• 2.2 million-pixel CCD is 2/3qsize, being

compact and light-weight.

The camera section is equipped with a

high picture quality digital signal

processing LSI.

• 10 Bit, 74 MHz high picture quality digital

processing after the process circuit.

• New type CCD flaw correcting function.

• High reliability, multi-function, and

improvement of maneuverability are

realized.

• Max. +48 dB gain-up is possible.

(Memory addition, CCD pixel addition

mode included)

Performance improvement by new-

generation FIT

• High sensitivity, wide dynamic range and

low smear are realized by CCD most

suited for high-quality pictures.

• High response and high resolution are

realized by driving H-CCD at 74 MHz.

Multiple functions

• Multi-function DTL such as high-

luminance DTL and skin DTL.

• Two HD-SDI output lines.

This camera employs new 2/3q2.2 million-pixel FIT CCD [1920(H)k1080(V)], realizing a

compact light-weight system including the optical system.

Also, the newly developed CCD having an FIT configuration suited for higher picture

quality and the development of low-noise, high-speed amplifiers have enabled the

realization of high sensitivity, high S/N ratio, and wide dynamic range.

With the newly developed digital signal processing LSI mounted on the camera head, it

performs signal processing such as GAMMA, KNEE and DTL matrix, and CCD flaw

correction based on a new system, intending to improve the maneuverability with

multifunction, high-quality, and high stability peculiar to a digital system.

Making the best use of the features of a small-sized self-contain camera, it is

accommodated in the camera housing and able to provide high-quality HD pictures as an

multi-purpose digital camera.

Features

- 6 -

• Do not attempt to disassemble the

camera or other units. In order to prevent

electric shock, do not remove screws or

covers. There are no user-serviceable

parts inside.

• Do not abuse the camera. Avoid striking,

shaking, etc. The camera contains

sensitive components which could be

damaged by improper handling or

storage.

• Do not let the lens remain uncapped

when the camera is not use. If the lens is

not installed, do not leave the lens mount

hole uncovered.

• Do not touch the surface of the lens or

prism.

• Do not use strong of abrasive detergents

when cleaning the camera body.

• Do not aim the camera toward the sun,

no matter whether it is turned on or not.

• Do not expose the camera to rain or

moisture, and do not try to operate the

equipment in wet conditions. Do not

operate the camera if it becomes wet.

• Do not operate the camera outdoors

during a lightning storm.

• Do not use the camera in an extreme

environment where high temperatures or

high humidity exist.

• Do not leave the camera turned on when

not in use. Do not unnecessarily turn the

camera power on and off repeatedly. Do

not block the ventilation slots.

• Do not cover the port otherwise block

ventilation during operation. Internal heat

buildup can cause a fire.

• Refer any servicing to qualified service

personnel.

• Handle the camera with care.

• Protect the precision made lens by

placing the lens cap over when the

camera is not in use. If the lens is not

installed, protect the surface of the prism

by placing the body cap into the lens

mount hole.

• Use a mild blower or lens cleaning tissue

designed for coated lenses, to clean the

surface of the lens or prism in the event

that it should become dirty.

• Use a dry cloth to clean the camera if it is

dirty. In case the dirt is hard to remove,

use mild detergent and wipe gently.

• Use caution when operating the camera

in the vicinity of spot lights or bright

lights, as well as light reflecting objects

and surfaces.

• Take immediate action if ever the camera

should become wet. Turn the power off

and have the unit checked by an

authorized service facility.

• Follow normal safety precaution to avoid

personal injury.

• Use the camera in an environment where

the temperature is within 0°C to +40°C,

and the relative humidity is within 30% to

90% (no condensation).

• Always turn the power off when the

camera is not going to be used. Operate

the camera only when there is adequate

ventilation.

•Cooling fan

There is internally provided a cooling fan.

Since the cooling fan is a consumable

part, replace it after about 50,000 hours

of operation.

(Be sure to ask the dealer for the

replacement.)

DON’TS DO’S

Precautions

- 7 -

Major Operating Controls and Their Functions

_Front Panel

5Cooling Fan

• Do not block or obstruct the ventilation during operation. It may otherwise cause

internal heating or fire.

• The life of this fan is approximately 50,000 hours (at room temp. 25°C). Replace the

fan as needed.

(When the room temperature is higher than 35°C, replace the fan earlier.)

Be sure to ask the dealer for the replacement.

_Top and Bottom Panels

Pin No.

Signal

Return control

VTR-S/S

UNREG GND

Iris manual selection

Iris control

UNREG 12V

Pin No.

Signal

Iris follow

Iris auto selection

——

1Lens Mount

2/3qstandard bayonet type (B4 mount) lens is installed.

2Lens Fixing Ring Knob

Lens is fixed by turning the knob counterclockwise.

3Cable Clamp

Used to clamp the lens cable.

4Lens Connector [LENS]

Used to connect the camera cables of the lens.

- 8 -

8Breaker [BREAKER]

If the breaker is operated due to over-current or the like, check the cause and eliminate

the trouble, then press the breaker button.

9Zoom/Focus Connector [ZOOM/FOCUS]

Used to connect the zoom/focus control cables of lens.

6Camera mounting hole (1/4-20UNC)

7Camera mounting hole (3/8-16UNC)

The screw holes can be used to secure the camera for installing it on camera housing,

and when using a pan/tilt head or a tripod.

Major Operating Controls and Their Functions

_Side Panel

:SDI Output Connectors [SDI OUT 1, 2]

SDI signal output is given by two lines.

;Interface Connector [I/F]

TXD: Data from Camera to remote controller

RXD: Data from remote controller to camera

Pin No.

Signal

Focus control selection

Zoom control selection

GND

Forcible iris closing

Iris control

+Voltage

Pin No.

Signal

COM

Focus control

Zoom control

Iris control selection

COM +Voltage

COM –Voltage

Pin No.

Signal

Y signal output

Pb signal output

Pr signal output

Sync signal input

DC 12V

Frame GND

TXD (H)

Pin No.

Signal

Y signal GND

Pb signal GND

Pr signal GND

Sync signal GND

DC GND

TXD (C)

RXD (H)

RXD (C)

- 9 -

How to Install

_How to set the lens

• Standard 2/3qbayonet type (B4 mount) lens of any makers can be used*.

1Turn the lens fixing ring knob counterclockwise to remove the lens mount cap.

2Set the lens in place, and turn the lens fixing ring knob clockwise to precisely fix the

lens.

3Connect the lens cable to the lens connector.

4Connect the remote (zoom/focus control) cable to the zoom/focus connector on the

rear panel.

* Note that there are some lenses uncontrollable with respect to zoom, focus function.

Be sure to ask the dealer for the installation,

adjustment and connection of this equipment.

How to install on the camera housing, pan/tilt head, tripod, etc.

1Precisely set the camera on the camera housing, pan/tilt head, tripod, etc. by using

the camera set-screw hole (1/4-20UNC, 3/8-16UNC).

2When mounting the camera on a pan/tilt head, be sure to use proper tools and

make sure that there is no fear of falling off.

Remote (zoom/focus control) Cable

(When a pan/tilt head is used, connect

the cable to the pan/tilt head.)

Camera Cable

(To Lens Connector)

Lens Fixing Ring Knob

- 10 -

YPbPr

D-sub 15-pin

How to Set Up the System (Connection)

_Connection of remote control box

• Use multi-cable for the connection of Camera Controller AK-HRP900L and this unit.

HD-SDI

Multi-cable (5m)

AK-HDMLTCA05

Coaxial Cable

(5C-FB)

HD Monitor

1Before connecting the cables, be sure to set the Power Switch of AC Adapter and

Camera Controller to OFF.

2Connect the multi-cable to the interface connector of the camera, and the opposite side

to Camera Controller.

3Set the AC Adapter Power Switch to ON, and the Camera Controller Power Switch to

ON, then the camera can be controlled.

4After shooting, set the Camera Controller Power Switch to OFF, and the AC Adapter

Power Switch to OFF.

Note that the monitor output is

attenuated and deteriorated if

the cable is too long.

External

sync

signal

(3 value

sync)

Video

Input

Signal

AC adapter

AW-PS505A

DC Power

Cable

Camera Controller

AK-HRP900L

NOTE

HD Monitor

Multi-purpose

Digital Camera

AK-HC910L

Table des matières

Autres manuels Panasonic Appareil photo numérique

Panasonic

Panasonic lumix DC-ZS70 Instructions d'installation et d'entretien

Panasonic

Panasonic DMC-CM1 Instructions d'installation et d'entretien

Panasonic

Panasonic D-Snap SV-AS3 Manuel utilisateur

Panasonic

Panasonic GPRV301FL - REAR VIEW CAMERA Manuel utilisateur

Panasonic

Panasonic Lumix DC-TZ92 Caractéristiques techniques

Panasonic

Panasonic Lumix DMC-TZ18 Caractéristiques techniques

Panasonic

Panasonic Lumix DMC-TZ30 Caractéristiques techniques

Panasonic

Panasonic Lumix DMC-FX35 Manuel utilisateur

Panasonic

Panasonic DMCFZ40 - DIGITAL CAMERA - ADVANCED FEATURES Caractéristiques techniques

Panasonic

Panasonic HM-TA2PC Manuel utilisateur

Panasonic

Panasonic DMC-GH3KBODY Instructions d'installation et d'entretien

Panasonic

Panasonic PalmCam PV-DC1000 Manuel utilisateur

Panasonic

Panasonic Lumix DMC-G5X Caractéristiques techniques

Panasonic

Panasonic Lumix DMC-TZ37EC Manuel utilisateur

Panasonic

Panasonic DMCGF1 - DIGITAL STILL CAMERA Mode d’emploi

Panasonic

Panasonic DMC-F2K Caractéristiques techniques

Panasonic

Panasonic DMC-FT6GA Manuel utilisateur

Panasonic

Panasonic LUMIX DMC-LF1 Manuel utilisateur

Panasonic

Panasonic LUMIX DMC-FZ2B Manuel utilisateur

Panasonic

Panasonic LUMIX DMC-ZS1 Manuel utilisateur

Panasonic

Panasonic AK-HC3900G Manuel utilisateur

Panasonic

Panasonic Lumix DMC-ZS7 Manuel du propriétaire

Panasonic

Panasonic VDR-D105 Manuel utilisateur

Panasonic

Panasonic Lumix DMC-ZS10 Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur