Panasonic FP0 Series Manuel utilisateur

FP0 Series

Programmable Controller

Panasonic ... the new name for

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]

FP0 – Super Compact PLC

Incredibly small, alone or even as multiple combined units

A control unit a mere 25mm in width. Even expanded to I/O 128 points, the width is still only 105mm.

The attachment area is the smallest in its class.

The control unit's dimensions are: W25* x H90 x D60mm.

Also, the I/O unit can be expanded to a maximum of

128-points. Even so, the size is still only W105 x H90 x

D60mm, a super compact design that breaks all previous

common sense rules on small-scale PLCs. With the

smallest-ever attachment area, the FP0 is perfect for

installation in machines, facilities, and control boards

where miniaturization is progressing even further.

*30mm width limited to I/O 32-points control unit.

Choose among 3 types of attachment

DIN rail Slim attachment

plate model Flat attachment plate

model (cannot be used

with expansions)

Input/output terminal

TOOL-Port

Hooks up by using the programming

software

or FPWIN GR and a single cable.

25mm

90mm The photo shows an I/O

14-point control unit.

This size is uniform for

all except the I/O 32-point

control unit.

Supply voltage: 24VDC

NAiS Control FPWIN Pro

Actual

size

From I/O 10-points…

Super Compact Size

COM-Port: 2nd RS232C Interface

(optional for all CPU units for serial communication)

90mm AC Power Supply:

• Supply voltage

85 to 265VAC

• Output 24VDC/

0.7A for FP0 PLC

(DC type)

NOTE:

A seperation between

the power supply and

the FP0 is needed to

allow for heat

dissipation.

➝

30.4mm

FP0_broschüre_4093 euen0904 15.10.2004 8:42 Uhr Seite 2

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]

Either 10 Points or the Maximum of 128 Points

You save this much space!

The expansion unit can be attached easily

without any cables.

The expansion unit can easily be attached directly to the

control unit. Special expansion cables, backplanes, and

so forth, are unnecessary as the expansion unit employs

a stacking system that uses expansion connectors and

locking levers on the surface of the unit itself.

Because of its super compact size and high capabilities,

the units are useful in a wide variety of applications.

Relay sequence

replacement In-house detectors Conveyer control

Parts feeders Food processing and

packaging machines Parking meters

Auto-stockers Driving range

Easy Expansion

…up to 128 I/Os

Control

unit Expansion

unit

(Maximum possible expansion is three units)

Control unit Expansion unit Expansion unit Expansion unit

105mm

The photo illustrates adding

three I/O 32-point expansion

units to an I/O 32-point control

unit, yielding 128 points.

Supply voltage 24VDC.

■Networking:

- ETHERNET

- PROFIBUS

- S-LINK

- MEWNET-F

■Analogue modules featuring

different numbers of input and

output channels

■Programming software:

- Control FPWIN Pro according

to IEC 61131-3

- Control FPWIN GR easy,

conventional programming

FP0_broschüre_4093 euen0904 15.10.2004 8:42 Uhr Seite 3

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]

FP0 CPU Units

A rich line-up of both single and combined units

=++

= +++

Input 12 Output 10 14

Input 8 Output 6 8

Input 4 Output 4

Input 14 Output 12 10

Input 6 Output 4 16

Input 8 Output 8

Input 16 Output 14 14

Input 8 Output 6 16

Input 8 Output 8

Input 18 Output 16 10

Input 6 Output 4 16

Input 8 Output 8 8

Input 4 Output 4

Input 20 Output 18 14

Input 8 Output 6 16

Input 8 Output 8 8

Input 4 Output 4

Input 22 Output 20 10

Input 6 Output 4 16

Input 8 Output 8 16

Input 8 Output 8

Input 24 Output 22 14

Input 8 Output 6 16

Input 8 Output 8 16

Input 8 Output 8

Input 28 Output 26 14

Input 8 Output 6 16

Input 8 Output 8 16

Input 8 Output 8 8

Input 4 Output 4

()

Total number

of I/O points ()

Control unit ()

Expansion unit 1

X20~/Y20~ ()

Expansion unit 2

X40~/Y40~ ()

Expansion unit 3

X60~/Y60~

=+++

Input 32 Output 30 14

Input 8 Output 6 16

Input 8 Output 8 16

Input 8 Output 8

Control Units

A maximum of 3 expansion units can be added to the control unit. (

Combining relay output types

and transistor output types

is also possible. In this event, the maximum number of I/O points when using a relay output type control panel is 110.)

10 points

Input

6 points

FP0-C10RSA FP0-C10CRSA

with 2nd RS232C FP0-C14CRSA

with 2nd RS232C FP0-C16PA (PNP)

FP0-C16TA (NPN) FP0-C32PA (PNP)

FP0-C32TA (NPN)

FP0-C16CPA (PNP)

FP0-C16CTA (NPN)

with 2nd RS232C

FP0-C32CPA (PNP)

FP0-C32CTA (NPN)

with 2nd RS232C

FP0-C14RSA

Output

4 points

10 points

Input

6 points Output

4 points

14 points

Input

8 points Output

6 points

14 points

Input

8 points Output

6 points

16 points

Input

8 points Output

8 points

16 points

Input

8 points Output

8 points

32 points

Input

16 points Output

16 points

32 points

Input

16 points Output

16 points

AC Power Supply

FP0-PSA2

Input

85 to 265VAC

Terminal type

Output

24VDC/0.7A

S-LINK CPU

FP0-SL1

S-LINK master

for up to 128 I/Os

Control Unit 10k

FP0-T32C

32 points

Input

16 points

FP0-T32CPA (PNP)

FP0-T32CTA (NPN)

with 2nd RS232C

Output

16 points

This advanced FP0 CPU

offers additional features:

■10,000 steps

program memory

■Battery backed RAM

■Real-time clock

■16383 words

data register

Expansion combinations

Combinations with relay output type – Examples

Relay output type Transistor output type

FP0_broschüre_4093 euen0904 15.10.2004 8:42 Uhr Seite 4

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]

FP0 Expansion Units

Choose the number of I/O points to suit the application

Combinations with transistor output type – Examples

=++

= +++

Input 24 Output 24 32

Input 16 Output 16 16

Input 8 Output 8

Input 8 Output 8 32

Input 16 Output 16

Input 32 Output 32 32

Input 16 Output 16 32

Input 16 Output 16

Input 40 Output 40 32

Input 16 Output 16 32

Input 16 Output 16 16

Input 8 Output 8

Input 8 Output 8 32

Input 16 Output 16 32

Input 16 Output 16

Input 48 Output 48 32

Input 16 Output 16 32

Input 16 Output 16

Input 8 Output 8 32

Input 16 Output 16 32

Input 16 Output 16

112

Input 56 Output 56 32

Input 16 Output 16 32

Input 16 Output 16 16

Input 8 Output 8

()

Total number

of I/O points ()

Control unit ()

Expansion unit 1

X20~/Y20~ ()

Expansion unit 2

X40~/Y40~ ()

Expansion unit 3

X60~/Y60~

=+++

Input 8 Output 8

128

Input 64 Output 64 32

Input 16 Output 16 32

Input 16 Output 16

Digital I/O Units

Relay output type Input only type Transistor output type

Analogue I/O Units Thermocouple and RTD Units Networking Units

PROFIBUS

FP0-DPS2

(DP Slave)

MEWNET-F

FP0-IOL

(MEWNET-F Slave)

S-Link CPU

FP0-SL1

(S-LINK Master)

FP0-E16RSA FP0-E8XA FP0-E16XAFP0-E8RSA

FP0-E8YRSA

8 points

Input

8 points

16 points

Input

16 points

8 points

Input

4 points

Option:

Output 8 points

Output

4 points

16 points

Input

8 points Output

8 points FP0-E8YPA (PNP)

FP0-E8YTA (NPN) FP0-E16YPA (PNP)

FP0-E16YTA (NPN)

FP0-E16PA (PNP)

FP0-E16TA (NPN) FP0-E32PA (PNP)

FP0-E32TA (NPN)

8 points

Output

8 points

16 points

Input

8 points Output

8 points

16 points

Output

16 points

32 points

Input

16 points Output

16 points

8 points3 points 4 points 4 points Input

8 points

FP0-A80A

•Input (12 bit):

10V, 0 –5V,

0 –20mA

•Output (12 bit):

10V, 0 –20mA

–

4 –20mA

–

10V

10V, 100mV

0 –5V, 0 –20mA

–

Input

2 points Output

1 points Output

4 points Output

4 points

FP0-A21A FP0-A04I FP0-A04V

4 points

Input

4 points

FP0-TC4 FP0-TC8

8 points 6 points

Input

6 points

•K, J, T, R type thermocouples can

be used

•Resolution: 0,1°C

•Accuracy: 0,8°C (R type: 3°C)

•Temperature range:

-100 to 1500°C

Input

8 points

FP0-RTD6

•Pt100, Pt1000,

NI1000

•Temperature

range -200

to 500ºC

FP0_broschüre_4093 euen0904 15.10.2004 8:42 Uhr Seite 5

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]

FP0 – Impressive Capabilities

High specifications for both speed and capacity

0.9µs per basic instruction. Pulse catch and interrupt input functions meet the need for high-speed response.

High-speed execution

Execution speed of 0.9µs per basic instruction. 500 steps program yields a scanning time of 1ms, which means the FP0

boosts the fastest processing time among the products of this class.

•Internal processing in the FP0

Large capacity

Pulse catch function

Can read pulses as short as 50µs, which greatly facilitates

sensor input.

•Pulse catch function

Interrupt input function

Accurate processing, unaffected by scan time

•Interrupt input function

I/O

refresh Program

execution I/O

refresh Program

execution

1 scan

I/O

refresh Program

execution

Internal processing in the FP0

I/O

refresh Program

execution I/O

refresh Program

execution

Sensor input

signal Cannot

read.

Lengthening

of sensor

input signal

Can

read!

With pulse catch function

Internal processing in the FP0

I/O

refresh Program

execution I/O

refresh Program

execution

Interrupt

program

Interrupt input

Interrupt program executed when

interrupt input enters.

A top-class large 5k and 10k steps program capacity housed within a compact body. Furthermore, data capacity for internal

devices like the data register is also ample. The unit's high performance is even suited to complicated controls

and controls with multiple amounts of data.

I/O 10-point, 14-point, 16-point type

Control unit type

I/O 32-point type

2 720 steps

1 660 words

5 000 steps

6 144 words

1 008 points

144 points

FP0-T32 CP/T

10 000 steps

16 383 words

Program size

Internal relays

Timers/Counters

Data registers

FP0_broschüre_4093 euen0904 15.10.2004 8:42 Uhr Seite 6

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]

FP0 – Impressive Capabilities

FP0 functions

Equipped with 2-axis independent positioning and high-speed counter for support of PWM output.

Pulse output function

(For transistor output type only) The unit comes equipped with

2 channels for the output of up to 10kHz pulses (5kHz during

2-channel output). Since these two channels can be separately

controlled, the PLC is also suitable for independent 2-axis

positioning. Setting automatic trapezoid control, automatic return

to home position and JOG operation are made very easy by using

instructions specially designed for such operations. Positioning control is a breeze with

the auto trapezoid control command!

Motor

driver 1

Pulse output

Clockwise output/

counter-clockwise output

Motor

driver 2

Pulse output

Clockwise output/

counter-clockwise output

High-speed counter function

The high-speed counter is prepared for 4 channels in single phase, and 2 channels in

2-phase. In single phase, the 4-channel total is 10kHz, and in 2-phase the 2-channel total is

2kHz total speed, making the unit suitable for conveyer control, inverter control, and so

forth using an encoder.

PWM output function

Its PWM (Pulse Width Modulation) output function makes

it possible to provide temperature control with a single

compact FP0 unit. (For transistor output type only)

Feeder roller

Lead wiring,

tape

Cutter

Encoder

Motor START/STOP

signal

Inverter

Cutter blade

control signal

Encoder output

inputted into

high-speed counter

Serial communication function

•The FP0’s second RS232C port (types C10CRS, C14CRS, C16C, C32C,

and T32C) allows direct connection to computers and operation display

panels. Also, bi-directional data communication with barcode readers

and other RS232C devices is made easy.

•Both the relay type and transistor output type control units are optionally

equipped with a 2nd RS232C port.

Host computer

(Personal computer) Operation

display panel

FP0

●

For connecting to computers and operation display panels

●

For data communication with RS232C devices

Imagechecker Bar code reader Serial printer

RS-232C

POWER READY

MODE

KEYPAD

CAMERA MONITOR

COM COM D2 D4 D6 D8 D9

FLASH

D1 D3 D5 D7

READY

MICRO-IMAGECHECKER

M100

MatsuhitaElectronic Works, Ltd.

24VDC

START

ACK IN1 IN3 IN5

COM COM IN2 IN4 COM

Heater

power up

●When pulse width values are increased...

●When reduced...

Analogue control function

Analogue control is made simple with four types of analoque modules

featuring different numbers of input and output channels.

Also, despite the small size, the I/O resolution is a high 1/4000 (12 bits).

Support various I/O ranges by setting the DIP switches on the analogue

I/O unit for simple operation.

PROG.

RUN

ALARM

ERROR

PROG

RUN

Pressure sensor

Laser analogue

sensor

Inverter

Potentiometer

MODE

OFF ON

V 0

I 0

COM

FP0 - A21

OUT

I 1

Stepping

motor

Servo motor

Stepping

motor

Servo motor

power up

Heater

power down

●When reduced...

FP0_broschüre_4093 euen0904 15.10.2004 8:42 Uhr Seite 7

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]

FP0 Communication

Serial interfaces and modem compatible

Programming interface TOOL-Port (also for communication)

In Computer Link mode, this port offers access to the entire FP0 memory area. For example during data exchange between

a host PC running SCADA software and an FP0 PLC, the Windows®based MEWNET-DDE Server assumes total control of

the communications protocol (MEWTOCOL.COM). Therefore the user can disregard the allocation of data ranges and

transfer parameters, because there is no additional programming required. The programmer is thus free to concentrate

exclusively on the project application requirements.

Communication Interface COM-Port

(flexible with two modes of operation, Computer Link and General Purpose)

In addition to the Computer Link communication possibilities described above, the optional integrated RS232C COM-Port

in the FP0 CPU module (types FP0-C10CRS, FP0-C14CRS, FP0-C16C, FP0-C32C and FP0-T32C) offers flexible programming

i.e. General Purpose. In this configuration it is possible to realise communication connections with different RS232C

peripheral devices, e.g. Bar Code Readers, slave devices, printers, measurement sensors or telecommunication

transmitters, etc.

Communication Interface COM-Port

Freely programmable RS232C interface for CPU modules type FP0-C10CRS,

FP0-C14CRS, FP0-C16C, FP0-C32C and FP0-T32C

Communication – Simple and efficient via two serial interfaces: TOOL-Port and COM-Port (RS232C interface).

Programming Interface TOOL-Port

For programming, and additionally Master/Slave communication, using

MEWTOCOL COM (Matsushita protocol)

Modem compatible

Even modem communication function is built into this compact body. Using a single telephone line,

programming maintenance can be carried out in remote facilities. With C-NET, multiple FPO units can be

connected.

■ 1:1 communication ■ 1:N communication ■ Multidrop communication

FP0_broschüre_4093 euen0904 15.10.2004 8:42 Uhr Seite 8

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]

FP0 Communication

Easier maintenance than ever before

Maintenance saving

■Overwrite function in RUN mode

It is possible to overwrite a program while the FP0 is running, such as during program debugging and startup

adjustments.

■Backup battery unnecessary

The program memory uses EEPROM. The program and device contents can be stored without a backup battery, and

even programming for a machine builder is safe.

■Password function

A password function can be set in order to change a program. Limited to people authorized to make program changes,

protection can be guaranteed better than ever.

■Input/output verification LED

Every unit is equipped with LED I/O indicators, housed within a compact body. Input/output status can be verified

at a glance.

Terminal type can be

plugged straight in without

resorting to crimping (made

by Phoenix Contact Co.).

Can handle wires from

0.3 to 1.25mm2.

Compatible models

FP0-C10RS, C10CRS, C14CRS, E8RS, E16RS

Unit connectors can be used

with 16-points and 32-points

units. Due to the loose-wiring,

pressure contact type design,

wiring is easy without the

need for insulation.

(MIL-C-83503)

Compatible models

FP0-C16T/C16P/C16CT/C16CP, C32T/C32P/C32CT/C32CP,

E16T/E16P, E32T/E32P,

FP0-T32CP/T32CT

Program memory uses EEPROM. In addition, programs can be changed even in RUN mode!

Simple installation

Comes with either terminal block or connector. Either type is easy to connect to wiring by simply

removing the terminal section.

Terminal block MIL connector

FP0_broschüre_4093 euen0904 15.10.2004 8:42 Uhr Seite 9

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]

FP0 PROFIBUS DP Slave or Remote I/O Unit

For cost effective control of distributed field device

The FP0 DPS2 can operate either as a DP slave module or as a remote I/O

system to which different decentralised inputs and outputs can be

connected. A DIP switch can be used to switch between the two modes:

Mode 1:

DP-Slave module. Connect the FP0 or FP∑(Sigma) CPU + expansion

modules to the PROFIBUS network.

Mode 2:

Remote I/O. Connect up to three expansion modules without CPU to the

PROFIBUS network.

In Remote I/O mode the unit can be connected to any PLC which offers a

PROFIBUS communication interface, making it totally independent of

NAiS PLCs.

Item Description

Type designation

PROFIBUS standards complied with FP0 DP Slave unit, Ord. No. FP0DPS2

EN 50170, DIN 19245 Part 1 and Part 3

Baud rates 9.6 / 19.2 / 93.75 / 187.5 / 500 / 1,500 / 3,000 / 6,000 / 12,000 Kbaud

automatic baud rate detection

Range of adresses that can be set 0..125

PROFIBUS connection

Configuration

9-pin D-sub connector

2 words input / 2 words output, up to 6 words input / 6 words output if no other expansion is connected

Remote I/O, max. 3 FP0 expansion units

FP0 communication Via FP0 system bus

Power supply 24VDC (21.6VDC …26.4VDC)

Max. power consumption 100mA

FP0-DPS Specifications

DP-Slave

Remote I/O

PLC

(Master)

PLC

(Slave)

Remote I/O

(Slave)

FP0 DP Slave FP∑(Sigma) DP Slave

DP Slave Remote I/O

Configuration with digital I/O

up to 96 transistor I/O or up to

48 relay I/O are possible

DP Slave Remote I/O Configuration

with analogue I/O up to 12 outputs or

24 analogue inputs or up to 24

thermocouple inputs are possible

AFP86910

FP2 DP or FMS Master

Special developed software tools ensure

easy configuration and start-up of

PROFIBUS products.

FP0_broschüre_4093 euen0904 15.10.2004 8:43 Uhr Seite 10

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: [email protected]

Autres manuels pour FP0 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Panasonic Contrôleurs

Panasonic

Panasonic AW-HHD100E Manuel utilisateur

Panasonic

Panasonic FPG Series Manuel utilisateur

Panasonic

Panasonic AKHRP900P - CAMERA CONTROLLER HC Manuel utilisateur

Panasonic

Panasonic FP0H Series Manuel utilisateur

Panasonic

Panasonic SFC-HC Manuel utilisateur

Panasonic

Panasonic AK-HRP1015 Manuel d'utilisation et d'entretien

Panasonic

Panasonic FP7 Series Manuel utilisateur

Panasonic

Panasonic KT4R Manuel utilisateur

Panasonic

Panasonic FP7 Series Manuel utilisateur

Panasonic

Panasonic FP7 Series Manuel d'installation

Panasonic

Panasonic FP7 Series Manuel utilisateur

Panasonic

Panasonic FP7 Series Manuel utilisateur

Panasonic

Panasonic AW-RP60GJS Manuel utilisateur

Panasonic

Panasonic CZ-TACG1 Manuel utilisateur

Panasonic

Panasonic CF-VEBC11U Manuel utilisateur

Panasonic

Panasonic AFPE224300 Manuel utilisateur

Panasonic

Panasonic CZ-256ESMC2U Manuel utilisateur

Panasonic

Panasonic LD-C60 Manuel utilisateur

Panasonic

Panasonic CZ-256ESMC3 Manuel d'instructions

Panasonic

Panasonic FP OPC Server Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Panasonic

Panasonic FP3 Manuel utilisateur

Panasonic

Panasonic AFPX-COM5 Manuel utilisateur

Panasonic

Panasonic FP Series Manuel du propriétaire

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur

3M MicroTouch EX113 Manuel utilisateur

KUHN

KUHN TKS Manuel utilisateur