Pakedge Device & Software RSB-KIT Manuel utilisateur
RSB-KIT
Preconfigured Audio/Video Bridging System
Installation Manual – Version 2.0
FCC Declaration of Conformity
Pakedge Device & Software, 1163 Triton Dr., Foster City, CA, 94404, declares under sole responsibility that
the RB-KIT complies with 47 CFR Parts 2 and 15 of the FCC Rules as a Class B digital device. This device
complies with Part 15 of FCC Rules. Operation of the device is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference that may
cause undesired operation.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE. THE UNIT MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING
WATER. CAUTION: DO NOT OPEN THE UNIT. DO NOT PERFORM ANY SERVICING OTHER
THAN THAT CONTAINED IN THE INSTALLATION AND TROUBLESHOOTING INSTRUCTIONS.
REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION: THIS DEVICE
MUST BE INSTALLED AND USED IN STRICT ACCORDANCE WITH THE MANUFACTURER’S
INSTRUCTIONS AS DESCRIBED IN THE USER DOCUMENTATION THAT COMES WITH
THE PRODUCT. WARNING: POSTPONE INSTALLATION UNTIL THERE IS NO RISK OF
THUNDERSTORM OR LIGHTNING ACTIVITY IN THE AREA.
1
RSB-KIT INSTALLATION MANUAL
RSB-KIT INSTALLATION MANUAL
SAFETY PRECAUTIONS:
When using this device, always follow basic safety precautions, to reduce the risk of fire, electric shock, and
injury to persons, including the following:
• Read all of the instructions (listed here and/or in the user manual) before you operate this equipment.
• Comply with all warning and caution statements in the instructions.
• Retain the instructions for future reference.
• Observe all warning and caution symbols that are afxed to this equipment.
• Comply with all instructions that accompany this equipment.
• Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to
determine that the product is in safe operating condition.
• Installation of this product must be in accordance with national wiring codes and conform to local regulations.
•Avoid using this product during an electrical storm. There may be a risk of electric shock from lightning. For
added protection for this product during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug the power supply, and disconnect the CAT5e..This will prevent damage to the product
due to lightning and power surges.
• Give particular attention to all safety precautions.
• Operate this product only from the type of power source indicated on the product’s marking label. If you are not
sure what type of power is supplied to your home, consult your dealer or local power company.
• It is recommended that the customer install an AC surge protector in the AC outlet to which this device is
connected. This is to avoid damage to the equipment from lightning strikes and other electrical surges.
• Wipe the unit with a clean, dry cloth. Never use cleaning uid or similar chemicals. Do not spray cleaners
directly on the unit or use forced air to remove dust.
• Keep the device away from excessive heat and humidity and keep the device free from vibration and dust.
• Do not directly cover the device, or block the airow to the device with insulation or any other objects.
2
RSB-KIT INSTALLATION MANUAL
**** Warning ****
1) No Factory Reset - The RSB-KIT was designed to be a very robust and exceptionally reliable product. Because
of this, you will find the RT-50V does not have a hardware or software reset button. The product can only be reset
by Pakedge either remotely, if the router is connected to a working internet connection with remote access or at
Pakedge’s facility. We highly recommend using the product only as described in Pakedge’s “Installation User
Manual” and “Advanced Setup User Manual”.
2) Preset IP Address Values - the RSB-KIT was designed to simplify a complex Audio-Video Bridging Network
installation and is precongured for an “out - of - the - box” VLAN installation. Therefore, the IP address values of
all VLAN’s are predened as described in the Installation User Manual. If different IP address values are absolutely
required, please be aware that changing them may affect other precongured features. Contact Pakedge support
for more information.
If you have further questions, email suppor[email protected] or call 1-650-385-8703 for support.
3
RSB-KIT INSTALLATION MANUAL
Table of Contents
1 INTRODUCTION ............................................................................................................................... 6
1.1 Package Content ................................................................................................................6
1.2 Getting to Know the RT-50V ................................................................................................. 7
Description for front LED’s: ................................................................................................... 7
Description for Ports: .......................................................................................................... 8
1.3 Getting to Know the SW8-GBV ...........................................................................................10
Description for front LED’s: ...................................................................................................10
Description for Ports: ..........................................................................................................11
2 NETWORK CONFIGURATION/SETUP OVERVIEW ...............................................................................14
2.1 Summary of Settings & IP Address Configuration ..................................................................14
2.2 Summary of Setup ...........................................................................................................14
2.2.1 Planning Your Network ....................................................................................................15
2.2.2 Basic Setup ...................................................................................................................18
2.2.3 Advanced Features Setup ...............................................................................................19
3 HARDWARE INSTALLATION ............................................................................................................. .21
3.1 Installing the Router and Switch ........................................................................................ 21
3.1.1 Securing RV-50V in RMB-FG Rack Mount Bracket .............................................................. 21
3.1.2 Connecting Cables to Switch Router ................................................................................. 23
4 BROADBAND SOFTWARE CONFIGURATION .................................................................................... 25
4.1 DHCP Configuration ........................................................................................................ 25
4.2 Static IP .......................................................................................................................... 26
4.3 PPPoE Configuration .........................................................................................................33
5 SUBSCRIPTION SERVICES .................................................................................................................36
6 CHANGING DEFAULT PASSWORDS ................................................................................................. 38
APPENDIX A – TROUBLESHOOTING FAQ’S .......................................................................................... 40
APPENDIX B – SPECIFICATIONS ........................................................................................................... 42
APPENDIX C – TECHNICAL SUPPORT ................................................................................................... 45
APPENDIX D – LIMITED WARRANTY ..................................................................................................... 46
4
RSB-KIT INSTALLATION MANUAL
1. INTRODUCTION
The popularity and affordability of IP networking has driven Audio Video and controls networks to share
the same physical wire with computer networks. However, unlike computer data that can tolerate a certain
degree of unpredictable latency, video streaming, audio streaming, and control systems cannot. These
sophisticated networks require the same robustness as an enterprise network to ensure the packets that carry
audio and video arrive in time and IP-based controls do not lose critical command packets.
The Pakedge Audio-Video Bridging (AVB) line of products is designed to solve these issues with minimum
configuration. The Pakedge solution pre-configures the Security Appliance (Router) and switch, dividing the
network into 5 separate subnets (VLANS) to manage traffic, broadcast, and priority for all devices based
on color coded ports. The simplicity of Pakedge’s solution allows custom installers to focus on quick, quality
installations without enterprise configuration worries.
The Pakedge Router including in the kit is configured for 6 VLANs, even though the switch is only configured
to handle 5. VLAN 6 is only used for a Guest Network because it is setup by policy to only have internet
access- no other devices on the internal network will be accessible. If the 6th (Guest) VLAN is desired, connect
a VLAN capable wireless access point directly to the router configured to the 6th VLAN. If you want to use the
6th VLAN through a wired port, consider instead the RSB-K24C.
Note: If this is your first time installing this product, please read this manual in its
entirety. Even though this product was design to get you up and running quickly, you
can perform unlimited customizations to meet every installation.
The very Basic (Section 2.2.2) setup would be- configure the router for the type of internet service such as
Dynamic, Static and PPPoE and plug the appropriate cables into the different VLAN/Priorities depending on
device.
5
RSB-KIT INSTALLATION MANUAL
A more Advance (Section 2.2.3) setup would be to do everything in the prior paragraph and then adding
load balancing for two internet connections and a setting up SSL VPN tunnel.
This Quick Start Guide only covers the Basic Setup, there a separate Advanced Features User Manual
(for latest Advanced Manual, please visit http://www.pakedge.com/userguides.php ) which covers the
advanced features offered by Pakedge. Any configuration outside of the Basic and Advanced is NOT
supported by Pakedge. Support, if needed, can be obtained from Fortinet.
1.1 PACKAGE CONTENT
Open the package carefully, and make sure that none of the items listed below are missing.
• RT-50V - Audio-Video Bridging Router
• SW8-GBV - Audio-Video Bridging Switch
• RMB-FG - Rackmount Bracket
• Power supply AC/DC (for RT-50V)
• Two Power Cables (US, EUR, UK, AUS/NZ, IT or IN/SA)
• Console Serial Cable (used for advanced features)
• Gray CAT5E Cable (Switch port 1 to Router Ports 1, 2 or 3)
• Red CAT5E Cable (WAN 1 Port to Internet Connection)
• Installation Manual - (Basic Only, Advanced Features Manual is Downloadable
on www.pakedge.com/userguides.php )
• Hardware Accessories
6
RSB-KIT INSTALLATION MANUAL
1.2 GETTING TO KNOW THE RT-50V
The front panel consists of LED indicators.
Description for front LED’s:
The router is powered on.
The router is turned off.
On during start-up or reboot.
Normal Operation.
The correct cable is in use and the
connected equipment has power.
Network activity at this interface.
No link established.
The interface is connected at 100 Mbps.
Green
Off
Green
Off
Green
Flashing Green
Off
Green
Power
Status
Link / Activity
10/100
OPERATIONSTATUSLED
7
RSB-KIT INSTALLATION MANUAL
1.2 GETTING TO KNOW THE RT-50V
The rear panel of the switch is laid out as follows:
Description for Ports:
Internal
WAN1 and
WAN 2
CONSOLE
USB
RJ-45
RJ-45
RJ-45
USB
10/100 Base-T
10/100 Base-T
9600 bps
Ethernet
Ethernet
RS-232-C
USB
3-port switch connection to up to three
devices or the internet network.
Redundant connections to the Internet.
Optional connection to the
management computet. Provides access
to the command line interface (CLI).
Optional connection for FortiUSB key
for firmware backup and installation.
PROTOCOL DESCRIPTIONTYPE SPEEDCONNECTOR
8
RSB-KIT INSTALLATION MANUAL
1.2 GETTING TO KNOW THE RT-50V
Restore to Factory Defaults
Due to the nature of an enterprise gateway/security appliance, a standard reset to factory default button
does not exist. Since the RT-50V is precongured, chances are a factory reset will not be required. However,
if for some reason this reset is needed, please contact Pakedge support for assistance.
Power Plug
To be compatible with electric service standards around the world, the switch is designed with a power
supply in the range from 100 to 240VAC, 50/60Hz. Please make sure that your outlet standard is within
this range. To power the switch, plug the female end of the power cord firmly into the receptacle of the
switch and the other end into a power outlet. After the power cord is plugged in, the power LED should be a
solid green to indicate normal power status.
9
Table des matières
Manuels Porte populaires d'autres marques
LST
LST M500RFE-AS Manuel utilisateur
Kinnex
Kinnex Media Gateway Manuel utilisateur
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuel utilisateur
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur
Telsey
Telsey CPVA 500 - SIP Manuel utilisateur
