Osram AS 330 Manuel utilisateur

!AS 330 !

Osram Sirius HRI 330W

Spot Moving Head

User Manual!

Information and specifications in this document are subject to change without notice. CONIC

Lighting Designs assumes no responsibility or liability for any errors or inaccuracies that may

appear in this manual.

Trademarks used in this text: Conic Lighting Designs is a registered trademark.

Other trademarks and trade names may be used in this document to refer to either the entities

claiming the marks and names or their products. Conic Lighting Designs disclaims any

proprietary interest in trademarks and trade names owned by others.

User Manual Version 1.0

Saturday 1 March 2014!

Conic Lighting DesignsTM - Luminaire User Manual!!!!!!! !1

Contacting Conic Lighting DesignsTM

Sales Department Conic Lighting Designs.

803A, 8/F Far East Consortium Building

121 Des Voeux Rd. Central, Hong Kong

e-mail: [email protected]

[email protected]

Customer Service Conic Lighting Designs

803A, 8/F Far East Consortium Building

121 Des Voeux Rd. Central, Hong Kong

e-mail: [email protected]

Website http://www.conicld.com

Conic Lighting DesignsTM - Luminaire User Manual!!!!!!! !2

Important Safety Information

Instructions pertaining to continued protection against fire, electric shock, and injury to

persons are found in Appendix A. Please read all instructions prior to assembling, mounting,

and operating this equipment.

Información Importante De Seguridad

En el Apéndice A se encuentran instrucciones sobre protección continua contra incendios,

descarga eléctrica, y lesiones personales. Lea, por favor, todas las instrucciones antes del

ensamblaje, montaje y operación de este equipo.

Symbols

The following international caution and warning symbols appear in margins in this manual

Warranty information

Limited Warranty

Unless otherwise stated, your product is covered by a one year parts warranty to be counted

from shipment date. The buyer must provide receipts or invoices for verification of purchase

and date. If purchase date cannot be proved, date of manufacture will be used to determine

warranty period.

Freight

All shipping costs will be paid by the purchaser. Under any circumstances freight collect

shipments will be accepted.

Warranty will be absolutely invalid if the product is damaged, modified in any way, or if the

item has been negligently repaired.

Conic Lighting DesignsTM - Luminaire User Manual!!!!!!! !3

CAUTION: This symbol appears next to Caution messages.

Ignoring these messages could result in personal injury

and/or damage to equipment.

WARNING: This symbol appears adjacent to high voltage

warning messages. Ignoring these messages could result

in serious personal injury.

This symbol indicates the minimum distance from a

lighted object

Table of Contents

Chapter 1!

Product Overview!6!

Features 6..............................................................................................

Operation 6...................................................................................................

Construction 6...............................................................................................

Related products and accessories 6............................................................

Specifications 7.......................................................................................

Physical specifications 7..................................................................................

Shipping dimensions & weight 7.............................................................................

Mounting information 8...................................................................................

Electrical/Optical information 8.........................................................................

Operation 8...................................................................................................

Chapter 2!

Setup and Conﬁguration!9!

Unpacking the fixture 9............................................................................

Installing a power cable cab 9...................................................................

Installing a Neutrik PowerCon 9.................................................................

Mounting the fixture 10............................................................................

Mounting the fixture upright 10........................................................................

Mounting the fixture on a truss 10....................................................................

Safety Cable 10....................................................................................................

Clamp 10.............................................................................................................

Mounting Procedure 10..........................................................................................

Linking Fixtures 11..................................................................................

Cable Connectors 11.......................................................................................

Connecting to the Link 11................................................................................

Powering On the Fixture 12.......................................................................

Setting the DMX Start Channel 12.............................................................

Shutting Down the Fixture 12....................................................................

Chapter 3!

The Menu System!13!

Menu navigation 13.................................................................................

Menu map 13..........................................................................................

Chapter 4!

DMX Programming Basics!15!

Conic Lighting DesignsTM - Luminaire User Manual!!!!!!! !4

DMX Programming Overview 15................................................................

DMX512 Links 15...........................................................................................

8-bit vs. 16-bit DMX Parameters 15..................................................................

Determining a DMX Start Channel 15................................................................

Protocol modes 16...................................................................................

DMX Protocols 16..........................................................................................

DMX-1 mode: 16 channels 16................................................................................

Gobo & color index 20..............................................................................

Appendix!21!

Important Safety Information 21...............................................................

Warning: For Continued Protection Against Fire 21.............................................

Warning: For Continued Protection Against Electric Shock 21...............................

Warning: For Continued Protection Against Injury To Persons 21..........................

Apéndice : Información Importante De Seguridad 22...................................

Advertencia: Para la protección continua contra incendios 22..............................

Advertencia: Para la protección continua contra shock eléctrico 22........................

Advertencia: Para Protección Continua Contra Lesiones Corporales 22..................

Conic Lighting DesignsTM - Luminaire User Manual!!!!!!! !5

Chapter 1!

Product Overview

The AS 330 is a very powerful luminaire, able to work as a spot. Offering from very narrow and

bright 4º beam to an impressive 25º spot beam, its scan movement runs smoothly and fast. It

comes with 2 gobo wheels, one fixed and one rotating, color wheel, 2 bi-directional rotative

prisms, smooth dimming from 0-100%; strobe with pulse and random effects, iris, zoom, focus

and frost functions.

Features

Operation

•540º pan and 240º tilt movement

•Color wheel, static gobo & rotating gobo wheels

•Smooth dimmer from 0 to 100%

•Auto-switching power supply

•100-240 V AC power input

•ZOOM, FOCUS, IRIS, FROST and strobe

Construction

•Neutrik PowerCon input.

•5 or 3 pin XLR DMX connectors

•Thermo plastic housing (black)

Related products and accessories

The following table lists related products and accessories available for the EBS 280 fixture. For

more detailed information, contact your Conic Lighting DesignsTM dealer/distributor or Conic

Lighting Designs Sales Team (see contacts section on page 2)

Item Description

Ordering code

Flight case for 2 fixtures

FC-AS330-2

NEUTRIK PowerCon input connector, cable mount (blue)

PWRCON-IN-B

C-Clamp

CLAMP-C

Safety cable

SAFECAB

Conic Lighting DesignsTM - Luminaire User Manual!!!!!!! !6

Specifications

Physical specifications

Fixture Dimensions: 375 mm x 461 mm x 662 mm

Fixture Weight: 22,5 kg

Shipping dimensions & weight

Single fixture carton

Dimensions: 450 mm x 430 mm x 730 mm

Weight: 27,5 kg

Flight case dimensions (2 pcs/case):

Dimensions: 920 mm x 690 mm x 785 mm

Weight: 96 Kg (Case + 2 Fixtures)

Conic Lighting DesignsTM - Luminaire User Manual!!!!!!! !7

Mounting information

EBS330 can be truss mounted using suitable clamps. Clamps and accessories for truss

mounting installation should be ordered separately. It can also stand upright on a suitable and

stable surface.

Electrical/Optical information

•Power Input: 100-240 VAC; 50-60 Hz; 460 W

•Light Source: Osram Sirius HRI 330 watt

•Beam Angle: 4º to 25º

Operation

•Pan 540º; Tilt 240º

•Control: DMX 512

•Minimum distance to lighted object: 1 meter

•DMX connectors: 3 or 5-pin male and female XLR connectors

•Maximum ambient operating temperature: 40º C

•Minimum ambient operating temperature: -30º C

Conic Lighting DesignsTM - Luminaire User Manual!!!!!!! !8

Chapter 2!

Setup and Configuration

Use the following steps to set up and configure your fixture:

1. Unpack the fixture.

2. Install power cord cap for your location.

3. Mount the fixture upright or suspended from a standard truss.

4. Connect the fixture to a DMX controller via DMX cabling.

5. Connect the fixture to power.

6. Configure the fixture for DMX control.

Unpacking the fixture

The fixture is transported in a shipping box or flight case specifically designed to protect the

product during transportation. When unpacking, inspect the fixture for physical damage of its

components. Conic Lighting Designs assumes no responsibility for products that are damaged

during transport. Always transport a product in its shipping box or flight case.

Installing a power cable cab

The fixture is shipped without a power cable although it is ordered by customer. When

installing the power cord, be sure you chose the right input connector as main power input and

chose the correct cord cap for your area. Please note that our standard cores in the mains lead

are colored according to the following criteria:

•green and yellow = earth

•blue = neutral

•brown = live

Installing a Neutrik PowerCon

1. Place bushing and chuck onto the cable.

2. Prepare cable as shown above. The power cable must be a three-conductor 2.5mm2 cable.

3. Insert wires into the terminals and fasten the clamping device by a flat screwdriver.

4. Push insert and chuck into housing (pay attention to the guiding keyway.)

5. Fasten bushing.

Conic Lighting DesignsTM - Luminaire User Manual!!!!!!! !9

Mounting the fixture

This fixture can be mounted suspended from a support system (as a truss) or freestanding on

its base.

Mounting the fixture upright

To mount the fixture upright, place the fixture on a stable non-flammable surface that will

support more than the weight of the fixture. If the surface is above floor height, use safety

cables to secure the fixture to the surface.

Mounting the fixture on a truss

To mount the fixture on a truss, use a reliable and certified truss that will support more than

the weight of the fixture.

Safety Cable

We strongly recommends that you use a safety cable when mounting any fixture. You must

supply your own safety cable and verify that the cable is capable of supporting the weight of

the fixture. You can order safety cables from your Conic Lighting Designs dealer/distributor.

(see Related Products and Accessories on page 5).

Clamp

You must supply your own clamps and verify the clamp is capable of supporting the weight of

the fixture. You can order C-clamps for truss mounting from your Conic Lighting Designs

dealer/distributor (see Related Products and Accessories on page 5).

Mounting Procedure

To mount fixtures on a truss:

1. Disconnect power to the fixture. If the fixture has been operating, allow the fixture to cool

before handling.

2. Always stand on a firm, stable surface when mounting a fixture to its support. The fixture

should be at a height where you can comfortably work on it, and should either be resting

on a stable surface, or held securely.

3. Attach suitable clamp in the clamp attaching holes on the fixture.!

4. Tighten the clamps firmly to the fixture’s base and to the support.

5. Loop one or more suitable safety cables around the support, through the safety wire holes

in the fixture.

Conic Lighting DesignsTM - Luminaire User Manual!!!!!!! !10

WARNING

This equipment is suitable for dry locations only. Do not

expose this equipment to rain or moisture.

CAUTION:

Always use a secondary safety cable when mounting this

fixture.This fixture must be installed and operated by

trained personnel only.

Mantain a minimum distance of 1 meter from a lighted

object

Table des matières

Autres manuels Osram Équipement d'éclairage

Osram

Osram Claypaky XTYLOS Manuel d'utilisation

Osram

Osram BY-P09 Manuel utilisateur

Osram

Osram SYNIOS P2720 Series Instructions d'installation et d'utilisation

Osram

Osram LEDinspect POCKET 200 Manuel utilisateur

Osram

Osram Claypaky SHARPY X FRAME Manuel utilisateur

Osram

Osram AirZing PRO 5030 UNIV Guide de l'utilisateur

Osram

Osram OTi50W Mode d’emploi

Osram

Osram RGBWA+UVIR Slimpar Series Manuel utilisateur

Osram

Osram Claypaky MINI XTYLOS HPE Manuel d'utilisation

Osram

Osram OTi30W Mode d’emploi

Osram

Osram LEDinspect SLIMLINE 250 LEDIL206 Manuel utilisateur

Osram

Osram Z68 Manuel utilisateur

Osram

Osram 44X10W Manuel utilisateur

Osram

Osram 3240G4 Manuel utilisateur

Osram

Osram Fluence VYPR 3p Guide de dépannage

Osram

Osram Inventronics DALI COUPLER LS HIGHBAY G2 Manuel utilisateur

Osram

Osram Traxon e:cue ProPoint Kontour Narrow RGB Manuel utilisateur

Osram

Osram BY-M46 Manuel utilisateur

Osram

Osram LEDinspect Manuel utilisateur

Osram

Osram ARCHISHAPE Media Tube Manuel utilisateur

Osram

Osram DALI PCU Manuel utilisateur

Osram

Osram 660 Manuel utilisateur

Osram

Osram LEDIL204 Manuel utilisateur

Osram

Osram ARCHISHAPE 2.5 Washer Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur