Osram BY-P28 Manuel utilisateur

BY-P28 Waterproof Par Light

1pc 200W COB 4in1 +12pcs 12W RGBW led

User manual

ase

rea

ins

ction

refu

y before use

TABLE OF CONTENTS

1. Safety Instructions ...........................................................................3-4

2. Technical Specification ......................................................................5

3. Menu Function................................................................................5-6

4. DMX Channel List ......................................................................... 7--8

5. Attention ..........................................................................................9

6. Fixture Cleaning ...............................................................................9

statement

Fixtures should be fastened on the hooks with screws. Make sure the

installation is secure to prevent chattering and slipping during operation. Also

make sure that the structure of the connected luminaire can support the

luminaire 10 times the weight. At the same time, when installing the lamps,

they also use a safety rope to support the weight of the lamps by 12 times.

The installation of the equipment should be carried out by professionals, and it

should also be installed in places where people can't reach them casually or

where no one is free to pass by.

ety

nst

uctions

Please keep this User Guide for future consultation. If you sell the unit to another

user, be sure that they also receive this instruction booklet.

Unpack and check carefully there is no transportation damage before using

the unit.

Before operating, ensure that the voltage and frequency of power

supply match the power requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order

to avoid electric shock.

The unit is for indoor use only. Use only in a dry location.

The unit must be installed in a location with adequate ventilation, at

least 50cm from adjacent surfaces. Be sure that no ventilation slots are

blocked.

Disconnect main power before replacement or servicing.

Make sure there are no flammable materials close to the unit while operating

as it is fire hazard.

Use safety cable when fixes this unit. DO NOT handle the unit by taking its head

only, but always by taking its base.

Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the

temperature is higher than this Unit surface temperature may reach up to 85℃.

DO NOT touch the housing bare-hand during its operation. Turn off the power

and allow about 15 minutes for the unit to cool down before replacing or serving.

In the event of serious operating problem, stop using the unit

immediately.Never try to repair the unit by yourself. Repairs carried out by

unskilled people can lead to damage or malfunction. Please contact the

nearest authorized technical assistance center. Always use the same type

spare parts.

DO NOT touch any wire during operation as high voltage might be causing

electric shock.

Warning:

To prevent or reduce the risk of electrical shock or fire, do not expose the unit

to rain or moisture.

DO NOT open the unit within five minutes after switching off.

The housing, the lenses, or the ultraviolet filter must be replaced

if they are visibly damaged.

Caution:

There are no user serviceable parts inside the unit. DO NOT open the housing

or attempt any repairs yourself. In the unlikely event your unit may require

service, please contact your nearest dealer.

Installation:

The unit should be mounted via its screw holes on the bracket. Always ensure

that the unit is firmly fixed to avoid vibration and slipping while

operating. And make sure that the structure to which you are attaching the

unit is secure and is able to support a weight of 10 times of the unit’s weight.

Also always use a safety cable that can hold 12 times of the weight of the unit

when installing the fixture.

The equipment must be fixed by professionals. And it must be fixed at a place

where is out of the touch of people.

2. Technical Specifications

Light source: 1pc 200W COB 4in1rgbw +12pcs 12W RGBW led

● power consumption: 350w

● Input voltage: AC100-260V ,50-60Hz

● Beam angle: COB LED 55°， 12W LED 25°

Control

● Control Mode: DMX512 / Self-propelled

● COB rgbw 4in1+RGBW ：10/14 channels

Construction

● IP rate: IP65

● Display: 180°reversible LCD display

● dimension: 29*28*22cm

● Net weight: 6.5kgs

● Gross weight: 7kgs

Accessories

● Signal line: 3-pin 1 piece

● Power cord: 1 piece

● Chinese/English manual: 1 piece

3.Lux Date

4.Menu Function:

1.Menu: COB 4in1 rgbw +RGBW

1.Master

2.Alone

2.Mic Sense

Sound sensitive adjust 001--100

3.Channel Value

10CH

6CH

4.Inform

1.Temperature - ℃

2.Soft V1.0

5.Default

Yes

Factory reset

6.Address

Set address 001--512

7.Display

1.Forward

2.Reverse

8.Manual

1.Dimmer R1

0-255

2.Dimmer G1

3.Dimmer B1

4.Dimmer W1

5.Dimmer R2

6.Dimmer G2

7.Dimmer B2

8.Dimmer W2

9.Strobe

9.Mode

1.DMX 512

2.Sound

3.Auto 1 fast to slow

Color changes

4.Auto 2 fast to slow

Color Fade

10.Channels

10CH

14CH

5.DMX Channel List:

A001- 10CH model

10 CH

Function

Number

Description

Dimmer

0-255

Dark to bright

Strobe

0-15

Strobe (slow to

fast)

16----214

Random strobe

215----255

COB R

dark to bright

0----255

COB G

COB B

COB W

Red of par

Green of par

Blue of par

White of par

A002- 14CH model

14CH

Function

Number

Description

Dimmer

0-255

Dark to bright

Dimming mode

Mode 1

0----49

Mode 2

50-199

Mode 3

100-149

Mode 4

150----255

Strobe

0-15

Strobe (slow to

fast)

16----214

Random strobe

215----255

COB R

dark to bright

0----255

COB G

COB B

COB W

Red of par

Green of par

Blue pf par

White pf par

rainbow

Dynamic color

0---49

Jump

50----99

Gradient

100--255

Control channel

From fast to slow

0----255

6. Attention:

1. When the lamp is lit after the lamp is powered on, the light emitted by the lamp bead should

be avoided as much as possible.

2. When loading or unloading the lamp, be sure to cut off the main power supply connected to

the device before you can open the cover on which the lamp bead is installed.

7. Fixture Cleaning

The outside of the lens must always be wiped so that the lighting effect is better.

Wipe the frequency of the environment. Humidity, excessive smoke, and a

particularly dirty environment can make the lens dusty.

● Use a soft cloth and special glass cleaner.

● Wipe the exterior of the lens at least every 30 days.

● Use vacuum cleaners or air guns inside the luminaire and clean it at least twice

a year.

Table des matières

Autres manuels Osram Équipement d'éclairage

Osram

Osram OTi50W Mode d’emploi

Osram

Osram TRAXON Media Pixel Ribbon DMX Outdoor Flat Manuel d'instructions d'installation

Osram

Osram SYNIOS P2720 Series Instructions d'installation et d'utilisation

Osram

Osram Traxon e:cue Allegro Media Tube Lite Manuel d'instructions d'installation

Osram

Osram LEDambient LEDINT203 Manuel utilisateur

Osram

Osram ADB Stagelight LEXPERT PROFILE L Manuel utilisateur

Osram

Osram AirZing PRO 5030 UNIV Guide de l'utilisateur

Osram

Osram LEDinspect SLIMLINE 250 LEDIL206 Manuel utilisateur

Osram

Osram DALI PCU Manuel utilisateur

Osram

Osram Traxon e:cue Allegro Media Tube Lite Manuel utilisateur

Osram

Osram traxon ecue ARCHISHAPE 2.0 Dot S Manuel utilisateur

Osram

Osram PermaLED® Area Light Medium Manuel utilisateur

Osram

Osram 44X10W Manuel utilisateur

Osram

Osram Inventronics DALI COUPLER LS HIGHBAY G2 Manuel utilisateur

Osram

Osram Claypaky XTYLOS Manuel d'utilisation

Osram

Osram Z68 Manuel utilisateur

Osram

Osram LEDinspect Slimline Manuel utilisateur

Osram

Osram Clay Paky ALPHA SPOT 300 Manuel utilisateur

Osram

Osram Traxon e:cue ProPoint Kontour Narrow RGB Manuel utilisateur

Osram

Osram BY-M46 Manuel utilisateur

Osram

Osram RGBWA+UVIR Slimpar Series Manuel utilisateur

Osram

Osram TW-DL-12V/110mA-Power Pack Manuel utilisateur

Osram

Osram ARCHISHAPE 2.5 Washer Manuel utilisateur

Osram

Osram Clay Paky STORMY Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur