Orion Stealth+ Manuel utilisateur
ORION VAN GEAR
Stealth+ 1.4” Solar Brackets (Set of 4)
INSTALLATION GUIDE support@orionvangear.com - (971) 267-2552
v2
PLEASE READ BEFORE INSTALLATION
ORION VAN GEAR LLC STRONGLY RECOMMENDS PROFESSIONAL INSTALLATION OF
AFTERMARKET ACCESSORIES TO YOUR VEHICLE. IMPROPER INSTALLATION COULD RESULT
IN AN AUTOMOBILE ACCIDENT AND COULD CAUSE SERIOUS INJURIES OR DEATH. YOU ARE
RESPONSIBLE FOR ASSEMBLING AND SECURING ORION VAN GEAR PRODUCTS TO YOUR
VEHICLE, CHECKING THE MOUNTING POINTS AND ATTACHMENTS PRIOR TO USE, AND
REGULARLY INSPECTING THE PRODUCTS FOR WEAR AND OR DAMAGE. YOU MUST ENSURE
THE PERSON(S) INSTALLING THE PRODUCT READ, UNDERSTAND, AND FOLLOW ALL
INSTRUCTIONS AND WARNINGS BEFORE BEGINNING THE INSTALLATION. THE
RESPONSIBILITY TO CORRECTLY INSTALL ORION VAN GEAR PRODUCTS IS YOURS AND MUST
BE TAKEN SERIOUSLY. ORION VAN GEAR LLC WILL NOT BE HELD LIABLE OR RESPONSIBLE
FOR DAMAGES OR PERSONAL INJURIES RESULTING FROM THE USE OF OUR PRODUCTS.
● ALWAYS INSPECT YOUR PRODUCTS UPON ARRIVAL
FOR SHIPPING DAMAGE OR MISSING PARTS
● REPORT MISSING OR DAMAGED PIECES TO OUR
SUPPORT TEAM BEFORE BEGINNING THE
INSTALLATION - SUPPORT@ORIONVANGEAR.COM
LINK TO ORIONVANGEAR.COM
MATERIALS REQUIRED
REQUIRED
● 1x 1/2" Socket or 1/2" Wrench
● 1x 3/16” Ball End Allen Key (For 5/16-18 Hardware)
● 1x Blue Threadlock (Medium Strength)
[RECOMMENDED ON T-NUT HARDWARE]
● 1x 1 oz Anti-seize Lubricant
[RECOMMENDED ON ALL NYLON LOCKNUT JOINTS]
● 1x Step Ladder
RECOMMENDED
● 1x Extra Person
● Extra Rags (to keep things clean)
*Included hardware shown on next page
INCLUDED HARDWARE
6x
4x 4x
4x 4x
4x
1/2" SS
3/4” SS
NYLON LOCKNUT
T-NUT
5/16” FLAT WASHER
Solar 8020
Solar Bracket
FLAT WASHER
4x
5/16-18 Hardware
BUTTON HEAD SCREWS
BUTTON HEAD SCREWS
Installation Steps
1A - Loosely position 8020 crossbars to approximate
solar panel size.
2B - *Attach (4) Solar Brackets to each solar panel
using (4) 3/4" SCREWs, (4) 5/16” WASHERs, and (4)
5/16-18 NYLON LOCKNUTs. (Apply anti-seize)
*orientation options shown on next page
3C - Place solar panel with attached Solar Brackets on
roof rack and position crossbars.
4D - Roll (4) 5/16-18 T-NUTs into 8020 crossbars where
appropriate to line up with solar brackets mounting
holes (Fig D)
5E - Insert 1/2" SCREWs through Solar Brackets into
5/16-18 T-NUTs and secure (Apply threadlock)
D
Note: Every roof layout and solar panel are different and installation may vary
8020 Channel
3/4" SCREW, BRACKET,
SOLAR PANEL, WASHER,
NYLOCK NUT (5/16-18)
APPLY ANTI-SEIZE
1/2" SCREW, 15S
TNUT (5/16-18)
APPLY THREADLOCK
Orientation Options
Mounted parallel to crossbars
Mounted Perpendicular to
crossbars
STOKED WITH YOUR NEW ORION PRODUCTS?
Help us spread the word about by tagging us in your photos and
videos (@OrionVanGear) on Instagram, Facebook, and TikTok!
We can’t wait to see your adventures and hear your stories!
FOR ANY QUESTIONS REGARDING INSTALLATION
OR REPLACEMENT PARTS CONTACT US:
ORION VAN GEAR PRODUCTS
ARE PROUDLY MADE IN THE USA.
support@orionvangear.com
(971) 267-2552
instagram.com/orionvangear
facebook.com/orionvangear
tiktok.com/@orionvangear
WIN UNIQUE PRIZES 🏆
Leave an eligible photo/video review on our website after
installing our products to automatically enter to win unique
prizes. You will receive a unique review link via email 2
weeks after your rack is delivered so keep an eye out! Or
use this link: https://orionvangear.com/pages/reviews
Table des matières
Autres manuels Orion Support TV
