Orion MPDP Manuel utilisateur
• 2009.04.29
Thank you for purchasing our MPDP.
Please read through this user's manual for safety before installing this product.
User’s Manual
STAND UNIT / WALL UNIT
MAIN FRAME
A revolutionary MPDP
Infinitely Expandable MPDP
A revolutionary MPDP
Infinitely Expandable MPDP
Address: 257-6, Gongdan-dong, Gumi-si, Gyeongsangbuk-do, Korea
Tel : +82-2-6678-8533, Fax: +82-2-6678-8599
ORION PDP CO.,LTD.
www.oriondisplay.net
Innitely Expandable
STAND UNIT
Contents
Accessory
OPTIONAL
STAND UNIT
1. Safety Precaution..............................................................
2. Installing the stand (3*3) ....................................................
3. Installing the MPDP.........................................................
4. Adjust the MPDP gap with the Adjuster. .........................
5. Setting MPDP ID configuration and Connection (3X3)....
WALL UNIT
1. Safety Precaution............................................................
2. Checking the location for installation..............................
3. Fixing Anchor and Bolt....................................................
4. Installing the Wall Bracket (3 X 3)...................................
5. Installing the MPDP ........................................................
6. Adjust the MPDP gap with the Adjuster. .........................
SPECIFICATION
STAND UNIT
Innitely Expandable
STAND UNIT
1560
1470
90
90
90
90
1720
1630
2240
2150
2660
2570
2201.6
2721.6
3150.64
505.85 1043.2
636.8 1564.8
635.2 2086.4
535.46 2608
800 800 850 900
600
580
530
530
Accessory
MAIN FRAME Accessories
OPTIONAL
MAIN FRAME 1EA
STAND FOOT STAND SUPPORT WALL BRACKET
BOLT M6*70 + NUT M6 4EA
BOLT M6*40 +
NUT M6 1EA
Round headed
BOLT M5*25L 4EA
PEG 4EA
Y-AXIS LINK 1EA
(Main frame link)
TOOL SET 1SET
5mm 2.5mm
6mm
10mm
ANCHOR BOLT 3/8" 2EA
BOLT M8*15 4EA
NUT M8 4EA
ADJUSTER M10*35 2EA BOLT M6*12 4EA
FIX BRACKET 1EA
SPANNER 1EA
USER MANUAL 1EA
STAND UNIT
This manual describes the installation case for 3X3 sets.¹
There are 4 different types of stand. Please select a stand type as you need.¹
Screen size (mm)
OPM-4240R / MIS-4210
MIS-4220R / MIS-4230R
OPM-4240 / MIS-4220
MIS-4230 / MIS-4230T
In case of NX3, NX4, or NX5 set formations, there is no stand bracket for the top
line of main frames.
However, it is designed to rmly fasten the main frames of the top line to the main
frames of the next line.
STAND UNIT
Innitely Expandable
STAND UNIT
Safety Precaution1.
Please read and understand this manual fully before installation.¹
Please hand over this manual to customers after installation and ask to read¹
and keep this manual for future use.
WARNING If the user does not comply with this instruction, serious injuries or death
can be caused.
CAUTION If the user does not comply with this instruction, minor injuries or product
damage can be caused.
Installation must be done by the skilled persons
designated by sales agent or dealership.
Installation work can be very dangerous for inexperienced
person.
It may cause serious injury or even death.
Do not install at unstable locations that cannot
withstand product weight.
In case of weak oor or ground, product may fall and cause
injuries.
If you need to move or replace the product,
please contact with skilled persons designated
by sales agent or dealership
If users move or install the product without proper skill and
experience, it may cause safety problem.
Do not hang on the product and avoid severe
impact to the product.
Product may fall and cause injuries.
WARNING
Please install as described in this manual.
Improper installation may cause serious injury or product
damage.
Installation of this product needs 3 or more
people.
3 or more people need to work together to avoid personal injury
or product damage.
Use enclosed accessories.
Improper accessories may not withstand the weight of the
product. It may cause safety problems.
Install on the even ground or oor.
Product installed on uneven places such as inclined places or
stairways may fall and cause personal injury or product damage.
Do not use heaters or humidiers at the place of
installation.
Heat or vapor may cause re, electric shock or malfunction.
Do not install the product near to sprinkler, re
detector, high-voltage cable, power source, or
places of vibration or impact.
Make sure to disconnect before installation.
If you install the product while the power cord is still connected,
it may cause electric shock or re.
Use working gloves when you install.
Wear working gloves to avoid any injury.
CAUTION
User's Manual
STAND UNIT
Innitely Expandable
STAND UNIT
Installing the stand (3*3)2.
Connect the Foot Stand and Stand Support together.1
When assembling, put the Foot Stand down to prevent it from falling.y
Attach the Stand Support to the upper and lower parts of the Foot Standy
After assembling, check if it would stand on its own.y
Top
※ It is more convenient to distinguish
top and bottom, if you put the main
frame as shown in the gure to use
the holes as indicators.
Bottom
After inserting M8 NUT, apply
the M8*12 bolt with the enclosed
6mm wrench.
Hook the main Frame to the lower part of the Stand.2
Assemble the Main Frame from the lower to the upper part.y
Insert the M6*70 bolt to the Main Frame and Stand Hook.y
If the M6*70 bolt was not inserted, the Main Frame would fall or be damaged.y
STAND UNIT
Innitely Expandable
STAND UNIT
Hook the 2nd main Frame at the lower hook of the3
center frame.
Insert the M6*70 bolt to the Main Frame and Stand Hook.y
If the M6*70 bolt was not inserted, the Main Frame would fall or be damaged.y
Assemble the two Main Frames.4
Assemble the two Main Frames at the upper and lower parts with the M6*70 bolt using they
enclosed wrench and 5mm wrench.
Assemble the gure
using the enclosed
wrench and 5mm
wrench.
STAND UNIT
Innitely Expandable
STAND UNIT
Hook the 3rd Main Frame at the bottom row to the5
Stand Hook.
Hook the Main Frame to the Stand Hook and assemble using a wrench and 5mm wrench.y
Make sure that the Main Frame is securely assembled when working.y
Remove the M6*70 bolt.6
Remove the M6*70 bolts inserted at the 1st and 2nd Main Frames.y
Assemble the gure using the
enclosed wrench and 5mm
wrench.
STAND UNIT
Innitely Expandable
STAND UNIT
Assemble the Main Frame at the 2nd row.7
Hook the Main Frame at the 2nd row to the upper Stand Hook.y
Assemble the Main Frame at the 1st row and Main Frame at the 2nd Row with the M6*70y
bolts.
Assemble the gure using the
enclosed wrench and 5mm
wrench.
Assemble the middle Main Frame at the 2nd row.8
Hook the Main Frame at the 2nd row to the upper Hook.y
Repeat the work indicated in Step No. 7 to assemble the upper and lower Main Framesy
and then assemble with the adjacent Main Frame with M6*70 bolts.
Repeat this process to assemble the Main Frame at the 3rd row.y
Assemble the gure using the
enclosed wrench and 5mm
wrench.
STAND UNIT
Innitely Expandable
STAND UNIT
Remove the supporting plate of both Main Frames at the9
vertical axis.
Once the supporting plate of both Main Frames at the vertical axis is removed, the bracketsy
will move from side to side. Move the vertical axis at both sides to install the MPDP.
Do not remove the supporting plate of the supporting axis.y
Remove the screws of the supporting plate
with a 5mm wrench. Then, remove the plate
completely from the Main Frame.
Fixed Center Column
Fix both rows at the vertical axis as "Y-Axis Link"10
based on the right side.
Fix both rows at the vertical axis as "Y-Axis Link" to the right side of the Main Framey
bracket for the simultaneous movement of the vertical axis.
Connect the Main Frame and Y-Axis Link
with M6*12 bolts using a 5mm wrench.
STAND UNIT
Innitely Expandable
STAND UNIT
Attach the PEG and Guide Pin to the MPDP.1
Assemble the four PEGs at the back of MPDP.y
Install the Guide Pins where MPDP touches.y
There is a hole for
the installation of
the Guide Pin at the
upper part and the
sides.
Installing the MPDP3.
Fasten 4 PEGs in the back
of MPDP with M5*25 bolts.
Install the MPDP from the lower part of the middle set.2
Insert the PEGs in the PEG holes.y
Put the set down slowly. The panels can be damaged by impact.y
Install the MPDP from the bottom of both sides after completing the installation at they
lower middle part.
If you need to detach a MPDP set in the lower line, move
the set in the upper line to position "C". Remove guide
pins from the set in the lower line, move it to position "A"
and detach from the main frame.
1
4
7
2
5
3
6
Table des matières
Autres manuels Orion Support et étagère
Orion
Orion EQ-2 Manuel utilisateur
Orion
Orion SteadyPix Pro Manuel utilisateur
Orion
Orion 9829 Manuel utilisateur
Orion
Orion 5374 Manuel utilisateur
Orion
Orion ASTROVIEW 9822 Manuel utilisateur
Orion
Orion 51514 Manuel utilisateur
Orion
Orion Sirius Pro AZ/EQ-G Manuel utilisateur
Orion
Orion EQ-13 Manuel utilisateur
Orion
Orion VERSAGO Manuel utilisateur
Orion
Orion WB-71 Manuel utilisateur
Orion
Orion CMH-01 Manuel utilisateur
Orion
Orion ATLAS EQ-G Manuel utilisateur
Orion
Orion CMK-01 Manuel utilisateur
Orion
Orion VAN GEAR Manuel utilisateur
Orion
Orion WB-31 Manuel utilisateur
Orion
Orion OIC WB-30 Manuel utilisateur
Orion
Orion AZ-3 Manuel utilisateur
Orion
Orion STAND UNIT Manuel utilisateur
Orion
Orion CMH-01 Manuel utilisateur
Orion
Orion CMA-01 Manuel utilisateur
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
